최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국항공우주학회지 = Journal of the Korean Society for Aeronautical & Space Sciences, v.46 no.7, 2018년, pp.535 - 541
홍상현 (Department of Mechanical Engineering, Chungnam National University) , 이정원 (Department of Mechanical Engineering, Chungnam National University) , 김재훈 (Department of Mechanical Engineering, Chungnam National University) , 이상연 (Agency for Defense Development) , 박재범 (Agency for Defense Development) , 정규동 (Agency for Defense Development)
In this study, wedge splitting tests were performed to evaluate fracture behavior of particle reinforced composite materials. Crack resistance was evaluated by using CTOD (crack tip opening displacement) and crack tip opening angle (CTOA). The particle reinforced composites were tested under various...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
입자강화 복합재료의 특성은? | HTPB(hydroxyl-terminated poly-butadiene)를 기반으로 하는 입자강화 복합재료는 산화제 및 고분자 물질을 결합하여 점탄성 특성을 보이는 재료이다. 이러한 입자강화 복합재료는 제조 과정, 보관 온도, 외부 압력 등에 의해 균열이 발생할 수 있다. | |
입자강화 복합재료에 발생하는 균열이 미치는 영향은? | 이러한 입자강화 복합재료는 제조 과정, 보관 온도, 외부 압력 등에 의해 균열이 발생할 수 있다. 균열은 재료의 내구성, 성능, 안정성 등을 저하시킨다. 한편 입자강화 복합재료의 강도는 철, 알루미늄과 같은 금속이나 콘크리트 등의 준취성 재료에 비해 낮을 뿐만 아니라 점탄성 특성을 지니고 있다. | |
입자강화 복합재료의 강도의 특성은? | 균열은 재료의 내구성, 성능, 안정성 등을 저하시킨다. 한편 입자강화 복합재료의 강도는 철, 알루미늄과 같은 금속이나 콘크리트 등의 준취성 재료에 비해 낮을 뿐만 아니라 점탄성 특성을 지니고 있다. 점탄성 특성은 선형탄성파괴역학을 적용하기 어렵게 한다. |
Kim, C. K., Yoo, J. C., Hwang, G. S., and Yim, Y.J., "Properties of HTPB/AP/Butacene Propellants," Journal of the Korean Society of Propulsion Engineers, Vol. 9, No. 2, 2005, pp.40-45.
Liu, C. T., "Crack Growth Behavior in a Solid Propellant," Engineering Fracture Mechanics, Vol. 56, No. 1, 1997, pp.127-135.
Tussiwand, G. S., Saoirna, V. E., Terzenbach, R., and De Luca, L. T., "Fracture Mechanics of Composite Solid Rocket Propellant Grains: Material Testing," Journal of Propulsion and Power , Vol. 25, No. 1, 2009, pp.60-73
Belrhiti, Y., Pop, O., Germaneau, A., Doumalin, P., Dipre, J. C., Harmuth, H., Huger, M., and Chotard, T., "Characterization of Timber Fracture using the Digital Image Correlation Technique and Finite Element Method," Journal of the European Ceramic Society, Vol. 35, 2015, pp.823-829.
Han, B., Ju, Y., and Zhou, C., "Simulation of Crack Propagation in HTPB Propellant using Cohesive Zone Model," Engineering Failure Analysis, Vol. 26, 2012, pp.304-317.
ASTM, Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness KIC of Metallic Materials, ASTM E399-09, Annual Book of ASTM Standards, ASTM International, Philadelpia, P.A., USA, 2009, pp.1-33.
Miller, T. C., "Poisson's Ratio Extrapolation from Digital Image Correlation Experiments (No. AFRL-RQ-ED-TP-2013-154)," Air Force Research Lab Edwards AFB CA Rocket Propulsion DIV., 2013.
Zhang, H., Huang, G., Song, H., and Kang, Y., "Experimental Investigation of Deformation and Failure Mechanisms in Rock under Indentation by Digital Image Correlation," Engineering Fracture Mechanics, Vol. 96, No. 1, 2012, pp.667-675.
BSI, Fracture Mechanics Toughness Tests. Method for Determination of $K_{IC}$ , Critical CTOD and Critical J values of Metallic Materials, BS 7448-1:1991, British Standards Institution, London, 1991.
ASTM, Standard Test Method for Measurement of Fracture Toughness, ASTM E1820-17a, Annual Book of ASTM Standards, ASTM International, Philadelpia, P.A., USA, 2017.
Newman, J. C., James, M. A., and Zerbst, U., "A Review of the CTOA/CTOD Fracture Criterion," Engineering Fracture Mechanics, Vol. 70, No. 3, 2002, pp.371-385.
Bohn, M. A., and Elsner, P., "Aging of the Binders GAP-N100 and HTPB-IPDI Investigated by Torsion DMA," Propellants, Explosives, Pyrotechnics, Vol. 24, No. 3, 1999, pp.199-205.
Seo, B., H., and Kim, J. H., "Estimation of Master Curves of Relaxation Modulus and Tensile Properties for Solid propellant," Advanced Materials Research, Vol. 871, 2015, pp.247-252.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.