최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기대한토목학회논문집 = Journal of the Korean Society of Civil Engineers, v.35 no.1, 2015년, pp.39 - 48
이종한 (대구대학교 토목공학과) , 권혁배 (대구대학교 토목공학과) , 강수태 (대구대학교 토목공학과)
Reinforced concrete (RC) structures strengthened with FRP materials would cause the loss of the reinforcing effect and the sudden failure of the structure due to the debonding of FRP. The debonding fracture strength of the FRP-strengthened concrete structures has been evaluated using the same streng...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
FRP 보강보의 휨 파괴모드는 무엇에 따라 정의할 수 있는가? | FRP 보강 RC보는 단순 철근콘크리트 보에 비해 파괴 메커니즘이 복잡하여 파괴모드를 고려한 해석이 필요하다. FRP 보강보의 휨 파괴모드는 FRP의 조기박리에 의한 국부파괴를 제외하고 인장 철근의 항복 유무, 콘크리트의 극한변형률 도달 유무에 따라 휨 파괴모드를 정의할 수 있다. | |
FRP 보강보의 박리파괴강도 산정 시 콘크리트의 극한변형률에 근거한 강도설계법을 적용하는데 한계가 있는 이유는? | , 2003). 그러나, FRP 휨 보강 콘크리트 구조물의 일반적인 파괴형태인 박리파괴는 콘크리트의 압축변형률이 극한변형률에 도달하기 전에 발생한다. 정진환 외(2003)의 연구에 의하면 FRP 보강보의 박리파괴강도 산정 시 콘크리트의 극한변형률에 근거한 강도설계법을 적용하기에는 한계가 있다고 하였다. | |
FRP 보강 RC보의 파괴모드는 무엇으로 구분할 수 있는가? | 그리고, 인장철근 항복 이전의 FRP 파단 및 FRP 박리는 인장철근이 단면의 중립축 근처에 위치하는 경우에만 가능하므로 사실상 실제 구조물에서는 발생할 가능성이 거의 없다. 따라서, FRP 보강 RC보의 파괴모드는 인장철근의 항복 이후 콘크리트의 압축파괴와 FRP 파단파괴, FRP 박리파괴로 구분할 수 있다. 이러한 파괴모드는 많은 휨 균열을 발생시켜 FRP의 제한적인 인성에도 어느 정도의 파괴 경고를 제공할 수 있다. |
Al-Zaid, R. Z., Shuraim, A. B., El-Sayed A. K., Al-Negheimish A. I. and Al-Huzaimy, A. M. (2010). "Flexural strengthening of shallow reinforced concrete beams using CFRP plates." 2nd International Structural Specialty Conference, CSCE, Winnipeq, Canada.
American Concrete Institute (ACI) Committee 318 (2008). Building code requirements for structural concrete and commentary, ACI 318-08, Farmington Hills, MI.
American Concrete Institute (ACI) Committee 440 (2008). Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures, ACI 440.2R-08, Farmington Hills, MI.
Canadian Standards Association (CSA) (2002). Design of buildings with fibre reinforced polymers, CSA-S806-02, Canada.
Cheung, J. H., Kim, S. D., Cho, B. S. and Lee, W. C. (2003). "Nominal moment of RC beams strengthened with carbon fiber sheets - I. Experimental Investigation." Journal of the Korean Society of Civil Engineers, Vol. 23, No. 5A, pp. 921-929 (in Korean).
Cheung, J. H., Kim, S. D., Cho, B. S. and Lee, W. C. (2003). "Nominal moment of RC beams strengthened with carbon fiber sheets - II. Analytical Investigation." Journal of the Korean Society of Civil Engineers, Vol. 23, No. 5A, pp. 931-938 (in Korean).
Desayi, P. and Krishnan, S. (1964). "Equation for the stress-strain curve of concrete." ACI Journal Proceedings, Vol. 61, No. 3, pp. 345-350.
El-Mihilmy, M. T. and Redesco, J. W. (2000). "Analysis of reinforced concrete beams strengthened with FRP laminates." Journal of Structural Engineering, Vol. 126, No. 6, pp. 684-691.
European Committee for Standardization (CEB) (2004). Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings, EN 1992-1-1:2004, Brussels, Belgium.
International Federation for Structural Concrete (FIB) (2001). Externally bonded FRP reinforcement for RC structures, fib Bulletin 14, Lausanne, Switzerland.
International Federation for Structural Concrete (FIB) (2006). Retrofitting of concrete structures by externally bonded FRPs, fib Bulletin 35, Lausanne, Switzerland.
Korea Concrete Institute (KCI) (2012). Concrete design code and commentary (in Korean).
Meier, U. l. and Kaiser, H. (1991). "Strengthening of structures with CFRP laminates." Advanced Composite Materials in Civil Engineering Structures, ASCE Specialty Conference, pp. 224-232.
Park, T. and Bu, J. (2002). "Flexural analysis of RC beams strengthened with soffit and web fiber sheets." Journal of the Korean Society of Civil Engineers, Vol. 22, No. 5A, pp. 1045-1057 (in Korean).
Ritchie, P., Thomas, D., Lu, L. and Conneley, G. (1991). "External reinforcement of concrete beams using fiber reinforced plastics." ACI Structural Journal, Vol. 88, No. 4, pp. 490-500.
Rosenboom, O. and Rizkalla, S. (2008). "Experimental study of intermediate crack debonding in fiber-reinforced polymer strengthened beams." ACI Structural Journal, Vol. 105, No. 1, pp. 41-50.
Sharif, A., Al-Sulaimni, G., Basunbul, I., Baluch, M. and Ghaleb, B. (1994). "Strengthening of initially loaded reinforced concrete beams using FRP plates." ACI Structural Journal, Vol. 91, No. 2, pp. 160-168.
Teng, J. G. and Yao, J. (2005). "Plate end debonding failures of FRPor steel- plated RC beams: A new strength model." Proceedings of the International Symposium on Bond Behavior of FRP in Structures(BBFS 2005), Hong Kong, pp. 283-290.
Ziraba, Y. N., Bsluch, M. H., Sharif, A. M., Azad, A. K. and Al-Sulaimani, G. J. (1994). "Guidelines toward the design of concrete beams with external plates." ACI Structural Journal, Vol. 91, No. 6. pp. 639-646.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.