최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국추진공학회지 = Journal of the Korean Society of Propulsion Engineers, v.19 no.1, 2015년, pp.33 - 41
김유천 (Department of Mechanical and Aerospace Engineering, Seoul National University) , 박정수 (4th R&D Institute-2, Agency for Defense Development) , 양승호 (Defense R&D center, Hanwha Corporation) , 박홍래 (Fire Power Technical Team, Defense Industry Technology Center) , 여재익 (Department of Mechanical and Aerospace Engineering, Seoul National University)
The kinetic analysis of energetic materials using Differential Scanning Calorimetry (DSC) is proposed. Friedman Isoconversional method is applied to DSC experiment data and AKTS software is used for analysis. The proposed kinetic scheme has considerable advantage over the standard method based on On...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
질량분율에 따른 활성화에너지와 빈도인자를 추출해서 구한 반응속도식의 장점은 무엇인가? | 질량분율에 따른 활성화에너지와 빈도인자를 추출해 내어 반응속도식을 완성하였다. 추출된 반응속도식은 기존의 ODTX 실험을 통해 추출되는 화학반응속도식 형태에 비해 이론적 측면과 정확성 측면에서 상당한 장점을 갖는다. 추출된 반응속도식의 검증을 위해 화학반응률 그리고 생성물 질량분율에 대해 DSC 실험과 동일한 조건하에서 전산모사를 수행하였으며 실험값과 잘 일치함을 확인하였다. | |
열 가열 실험 중, 고에너지 물질의 반응속도식을 추출하는데 주로 사용된 실험은 무엇인가? | 이러한 열 가열 실험 중 폭약, 추진제 등 고에너지 물질의 반응속도식을 추출하는 데 있어서는 주로 ODTX 실험이 사용되어 왔다[1-3]. ODTX는 가열률에 따른 고에너지 물질의 폭발시간을 실험을 통해 측정하고 실험 결과의 수치적 접합과정을 통해 반응속도식을 추출해낸다. | |
열 하중에 따른 물질의 화학적 거동을 예측하기 위해 필수적인 것은 무엇인가? | 열 하중에 따른 물질의 화학적 거동을 예측하기 위해서는 적절한 형태의 반응속도식과 화학반응식의 사용이 필수적이다. 보통 물질의 화학반응은 온도에 기반하여 이루어지기 때문에 화학반응의 반응속도식을 추출하기 위해 다양한 형태의 열 가열 실험을 이용한다. |
McClelland, M.A., Maienschein, J.L., Nichols, A.L., Wardell, J.F., Atwood, A.I. and Curran, P.O., "ALE3D Model predications and Materials Characterization for the Cookoff Response of PBXN-109," Joint Army Navy NASA Air force 38th Combustions Subcommittee, Destin, FL, U.S.A., pp. 1-15, April 2002.
Kaneshige, M.J., Renlund, A.M., Schmitt, R.G. and Erikson, W.W., "Cook-Off Experiments For Model Validation At Sandia National Laboratories," The 12th international Detonation Symposium, Albuquerque, NM, U.S.A., 87185, 2002.
Yoh, J.J., McClelland, M.A., Maienschein, J.L., Wardell, J.F. and Tarver, C.M., "Simulating thermal explosion of RDX-based explosives: Model comparison with experiment," Journal of Applied Physics, Vol. 97, No. 8, 083504, 2005.
Friedman, H.L., "Kinetics of Thermal Degradation of Char-Forming Plastics from Thermogravimetry. Application to a Phenolic Plastic," Journal of Polymer Science, Vol. 6, No. 1, pp. 183-195, 1963.
Roduit, B., Borgeat, Ch., Berger, B., Folly, P., Andres, H., Schadeli, U. and Vogelsanger, B., "Up scaling of DSC Data of High Energetic Materials Simulation of Cook Off Experiments," Journal of Thermal Analysis and calorimetry, Vol. 85, No. 1, pp. 195-202, 2006.
Roduit, B., Folly, P., Berger, B., Mathieu, J., Sarbach, A., Andres, H., Ramin, M. and Vogelsanger, B., "Evaluating SADT by Advanced Kinetics-based Simulation Approach," Journal of Thermal Analysis and calorimetry, Vol. 93, No. 1, pp. 153-161, 2008.
Meyer, W. and Neldel, H., "Relation Between the Energy Constant and the Quantity Constant in the Conductivity-Temperature Formula of Oxide Semiconductors," Zeitschrift fur technische Physik, Vol. 18, No. 12, pp. 588, 1937.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.