최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국안전학회지 = Journal of the Korean Society of Safety, v.30 no.1, 2015년, pp.34 - 39
The feasibility of recycling wasted printed circuit board (PCB) is investigated by preparing PCB added flame retardant composites filled with either unsaturated polyester or polyurethane. In order to improve electroconductive properties, copper powder was added into the composites, which results als...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
국외 PCB 처리방안으로 개발된 기술의 현황은? | 국외 PCB 처리방안으로는 PCB를 열처리하여 금속성분을 산화물로 만들거나, 부유선광법을 이용하여 건축 구조재 및 저 부가 충진 소재로 활용하는 기술을 개발 하였으나1~3), 2차 오염 및 공해유발로 사용이 제한되고 있다. | |
불포화폴리에스테르와 폴리우레탄을 주요 수지로 하여 PCB 파우더와 구리 파우더를 첨가제로 선정해 복합성형체를 제조한 뒤 표면저항을 측정한 결과는 무엇인가? | 4) 표면저항측정 결과 PCB 파우더 함량 증가에 따라 Au, Ag, Cu에 의해 전기전도성이 소폭 향상되었으며, 구리 파우더 첨가에 따라 anti-static 영역을 만족하여 대전방지기능 복합성형체로 응용이 가능할 것으로 사료된다. | |
PCB의 주성분은? | 이로 인하여 폐기되는 PCB의 양 또한 증가하고 있다. PCB는 에폭시(epoxy), 페놀(phenol), 유리섬유(glass fiber), 구리(copper) 등을 주성분으로 하며 매립 시 분해 되지 않아 토양 오염이 예상 된다. 또한 소각 시 유독성 가스가 발생하는 등 폐기물 처리법 강화로 인한 처리 비용 증가 문제가 발생하여 경제적 부담이 높아지고 있다. |
E. Jackson, "Hydrometallurgical Extraction and Reclamation", Ellis Horwood Series in Industrial Metals, pp. 204, 1986.
V. A. Ettel and B. V. Tilak, "Comprehensive Treatise of Electrochemistry, vol. 2, Plenum Press", pp. 328, 1981.
C. L. Mantell, "Electrochemical Engineering(4th, ed)", McGraw-Hill, pp. 198, 1960.
S.V. Muzumdar and L. J. Lee, "Polycarbonate-Polystyrene Block Copolymers and Their Application as Compatibilizing Agents in Polymer Blends", Polym. Eng. and Sci., Vol. 31, pp. 1547, 1991.
N. Dharmarajan, "Fracture toughness of Particle Filled Fiber Reinforced Polyester Composites", J. Appl. Polym. Sci., Vol. 42, pp. 601, 1991.
C. D. Han and D. Lee, "Analysis of the Curing Behavior of Unsaturated Polyester Resins using the Approach of Free Radical Polymerization", J. Appl. Polym.. Sci., Vol. 33, pp. 2859, 1987.
J. E. Hoffmann, "Recovering Precious Metals from Electronic Scrap", JOM, Vol. 44, pp. 43-48, 1992.
Y. L. Elaine, "The Recovery of Metals from Electronic Scrap", JOM, Vol. 43, pp. 53-61, 1991.
G. Edson, "The Recovery of Metals from Electronic Scrap", Recovering and Refining of Precious Metals, Skytop, PA, Paper 10, 1980.
S. Koyanaka and S. Endoh, "The Recycling of Printed Wiring Board Scraps Using a shape Sorting Technique", Vol. 32, No. 6, pp. 385-391, 1995.
R. P. Kusy and D. T. Tunner, "Electrical Conductivity of a Polyurethane Elastomer Containing Segregated Particles of Nickel", J. Appl. Polym. Sci., Vol. 17, pp. 1631, 1973.
P. K. Mallick, "Fiber-reinforced Composites", Marcel Dekker, pp. 22-24, 1988.
J. W. Cho and D. R. Paul, "Nylon 6 nanocomposites by melt compounding", Polymer, Vol. 42, pp. 1083, 2001.
J. S. Jang, "The Adhesion Promotion of Glass Fiber Reinforced Composite Using Methacrylate Functional Silanes", J. Korean Ind. Eng. Chem., Vol. 1, pp. 133, 1990.
S. J. Park, J. S. Jun, and J. R. Lee, "Enhancement of Interfacial Adhesion of Glass Fibers-reinforced Unsaturated Polyester Matrix Composites : Effect of -methacryloxypropyltrimethoxy Silane Treatment Containing -aminopropyltriethoxy Silane", J. Korean Ind. Eng. Chem., Vo. 12, pp. 143, 2001.
I. H. Tavman and M. T. Coban, "Thermal Conductivity of Particle Filled Polyethylene Composite Materials", Compos. Sci. Technol., Vol. 63, pp. 113, 2003.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.