최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Journal of power electronics, v.15 no.2, 2015년, pp.555 - 566
Lee, Eun-Soo (Department of Nuclear and Quantum Engineering, KAIST) , Sohn, Yeung-Hoon (Department of Electrical Engineering, KAIST) , Nguyen, Duy Tan (Department of Nuclear and Quantum Engineering, KAIST) , Cheon, Jun-Pil (Department of Nuclear and Quantum Engineering, KAIST) , Rim, Chun-Taek (Department of Nuclear and Quantum Engineering, KAIST)
A TRIAC dimming LED driver that can control the brightness of LED arrays for a wide range of source voltage variations is proposed in this paper. Unlike conventional PWM LED drivers, the proposed LED driver adopts a TRIAC switch, which inherently guarantees zero current switching and has been proven...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
M. R. Krames, O. B. Shchekin, R. Mueller-Mach, G. O.Mueller, L. Zhou, G. Harbers, and M. G. Craford, “Status and future of high-power light-emitting-diodes for solid-state lighting,” Journal of Display Technology, Vol. 3, No. 2, pp. 160-175, Jun. 2007.
J. Cardesin, J. Ribas, J. Garcia-Garcia, M. Rico-Secades, A. J. Calleja, E. L. Corominas, and M. A. Dalla Costa, “LED permanent emergency lighting system based on a single magnetic component,” IEEE Trans. Power Electron., Vol. 24, No. 5, pp. 1409-1416, May 2009.
D. A. Steigerwald, J. C. Bhat, D. Collins, R. M. Fletcher,M. O. Holcomb, M. J. Ludowise, P. S. Martin, and S. L. Rudaz, “Illumination with solid state lighting technology,” IEEE J. Sel. Topics Quantum Electron., Vol. 8, No. 2, pp. 310–320, Apr. 2002.
Matthias Wendt and Jan-Willem Andriesse, “LEDs in real lighting applications: from niche markets to general lighting,” IEEE Industry Applications Conference, pp. 2601-2603, 2006.
S. Y. (Ron) Hui and Y. X. Qin, “A general photo-electro-thermal theory for light emitting diode (LED) systems,” IEEE Trans. Power Electron., Vol. 24, No. 8, pp. 1967-1976, Aug. 2009.
Y. K. Cheng and K. W. E. Cheng, “General study for using LED to replace traditional lighting devices,” IEEE International Conference on Power Electronics Systems and Applications (ICPESA), pp. 173-177, 2006.
M. S. Shur and R. Zukauskas, “Solid-state lighting: toward superior illumination,” in Proc. the IEEE, Vol. 93, No. 10, pp. 1691-1703, 2005.
K. Streubel, N. Linder, R. Wirth, and A. Jaeger, “High brightness AlGaInP light-emitting diodes,” IEEE J. Sel. Topics Quantum Electron., Vol. 8, No. 2, pp. 321-332, Mar. 2002.
Q. Hu and R. Zane, “A 0.9 PF LED driver with small LED current ripple based on series-input digitally-controlled converter modules,” IEEE Applied Power Electronics Conference and Exposition (APEC), pp. 2314-2320, 2010.
J. M. Alonso, J. Viña, D. G. Vaquero, G. Martínez, and R. Osorio, “Analysis and design of the integrated double buck-boost converter as a high-power-factor driver for power-LED lamps,” IEEE Trans. Ind. Electron., Vol. 59, No. 4, pp. 1689-1697, Apr. 2012.
Q. Hu and R. Zane, “LED driver circuit with series-input-connected converter cells operating in continuous conduction mode,” IEEE Trans. Power Electron., Vol. 25, No. 3, pp. 574-582, Mar. 2010.
Z. Ye, F. Greenfeld, and Z. Liang, “Single-stage offline SEPIC converter with power factor correction to drive high brightness LEDs,” IEEE Applied Power Electronics Conference and Exposition (APEC), pp. 546-553, 2009.
Y. Hu, L. Huber, and M. M. Jovanovi´, “Single-stage, universal-input AC/DC LED driver with current-controlled variable PFC boost inductor,” IEEE Trans. Power Electron., Vol. 27, No. 3, pp. 1579-1588, Mar. 2012.
X. Xie, J. Wang, C. Zhao, Q. Lu, and S. Liu, “A novel output current estimation and regulation circuit for primary side controlled high power factor single-stage flyback LED driver,” IEEE Trans. Power Electron., Vol. 27, No. 11, pp. 4602-4612, Nov. 2012.
Y. Zhou, X. Li, X. Ye, and G. Zhai, “A remaining useful life prediction method based on condition monitoring for LED driver,” IEEE conference on Prognostics and System Health Management (PHM), pp. 1-5, 2012.
Q. Hu and R. Zane, “Minimizing required energy storage in off-line LED drivers based on series-input converter modules,” IEEE Trans. Power Electron., Vol. 26, No. 10, pp. 2887-2895, Oct. 2011.
Y. Hu and M. M. Jovanovic, “A novel LED driver with adaptive drive voltage,” IEEE Applied Power Electronics Conference and Exposition (APEC), pp. 565-571, 2008.
M. Ali, M. Orabi, M. E. Ahmed, and A. El-Aroudi, “Design consideration of modified SEPIC converter for LED lamp driver,” IEEE Power Electronics for Distributed Generation Systems (PEDG), pp. 394-399, 2010.
D. Gacio, J. M. Alonso, A. J. Calleja, J. Garcia, and M. Rico-Secades, “A universal-input single-stage high-power-factor power supply for HB-LEDs based on integrated buck–flyback converter,” IEEE Trans. Ind. Electron., Vol. 58, No. 2, pp. 589-599, Feb. 2011.
J. M. Alonso, J. Viña, D. G. Vaquero, G. Martínez, and R. Osorio, “Analysis and design of the integrated double buck–boost converter as a high-power-factor driver for power-LED lamps,” IEEE Trans. Ind. Electron., Vol. 59, No. 4, pp. 1689-1697, Apr. 2012.
S. Y. R. Hui, S. N. Li, X. H. Tao, W. Chen, and W. M. Ng, “A novel passive offline LED driver with long lifetime,” IEEE Trans. Power Electron., Vol. 25, No. 10, pp. 2665-2672, Oct. 2012.
W. Chen, “A comparative study on the circuit topologies for offline passive light-emitting diode (LED) drivers with long lifetime & high efficiency,” IEEE Energy Conversion Congress and Exposition (ECCE), pp. 724-730, 2010.
B. H. Lee, H. J. Kim, and C. T. Rim, “Robust passive LED driver compatible with conventional rapid-start ballast,” IEEE Trans. Power Electron., Vol. 26, No. 12, pp. 3694-3706, Dec. 2011.
E. S. Lee, B. H. Choi, J. P. Cheon, B. C. Kim, and C. T. Rim, “Temperature-robust LC3 LED driver with low THD, high efficiency, and long life,” IEEE International Power Electronics Conference (IPEC), pp. 3358-3364, 2014.
Y.-H. Liu, Z.-Z. Yang, and S.-C. Wang, “A novel sequential-color RGB-LED backlight driving system with local dimming control and dynamic bus voltage regulation,” IEEE Trans. Consum. Electron., Vol. 56, No. 4, pp. 2445-2452, Nov. 2010.
A. Mirvakili and V. Joyner, “A digitally-controlled, bi-level CMOS LED driver circuit combining PWM dimming and data transmission for visible light networks,” IEEE GLOBECOM Workshops (GC Wkshps), pp. 1067-1071, 2010.
W. Feng, F. C. Lee, and P. Mattavelli, “Optimal trajectory control of LLC resonant converters for LED PWM dimming,” IEEE Trans. Power Electron., Vol. 29, No. 2, pp. 979-987, Feb. 2014.
D. Gacio, J. M. Alonso, J. Garcia, L. Campa, M. J. Crespo, and M. Rico-Secades, “PWM series dimming for slow-dynamics HPF LED drivers: the high-frequency approach,” IEEE Trans. Ind. Electron., Vol. 59, No. 4, pp. 1717-1727, Apr. 2012.
J. Zhang, H. Zeng, and T. Jiang, “A primary-side control scheme for high-power-factor LED driver with TRIAC dimming capability,” IEEE Trans. Power Electron., Vol. 27, No. 11, pp. 4619-4629, Nov. 2012.
L. Yan, B. Chen, and J. Zheng, “A new TRIAC dimmable LED driver control method achieves high-PF and quality-of-light,” IEEE Applied Power Electronics Conference and Exposition (APEC), pp. 969-974, 2012.
J. T. Hwang, M. S. Jung, D. H. Kim, J. H. Lee, M. H. Jung, and J. H. Shin, “Off-the-line primary side regulation LED lamp driver with single-stage PFC and TRIAC dimming using LED forward voltage and duty variation tracking control,” IEEE J. Solid-State Circuit, Vol. 47, No. 12, pp. 3081-3094, Dec. 2012.
R. Zhang and H. S.-H. Chung, “A TRIAC-dimmable LED lamp driver with wide dimming range,” IEEE Trans. Power Electron., Vol. 29, No. 3, pp. 1434-1446, Mar. 2014.
J.-H. Cheng, A. F. Witulski, and J. L. Vollin, “A small-signal model utilizing amplitude modulation for the class-D converter at fixed frequency,” IEEE Trans. Power Electron., Vol. 15, No. 6, pp. 1204-1211, Nov. 2000.
A. Katsuki and Y. Sugimoto, “Design of a distortion-free PFC CV/CC ac power supply having variable capacitance devices,” IEEE Telecommunications Energy Conference (INTELEC), pp. 1-6, 2011.
T. T. Nguyen, M. F. Kandlawala, A. H. Rahim, and M. A. Alam, “Dynamic performance of a grid connected wind generation system with fuzzy logic controlled variable capacitance compensation,” IEEE Australasian Universities Power Engineering Conference (AUPEC), pp. 1-6, 2008.
M. Uenohara, “Noise consideration of the variable capacitance parametric amplifier,” IEEE Proceedings of the IRE, Vol. 48, No. 2, pp. 169-179, 1960.
J. Huh, S. W. Lee, W. Y. Lee, G. H. Cho, and C. T. Rim, “Narrow-width inductive power transfer system for online electrical vehicles,” IEEE Trans. Power Electron., Vol. 26, No. 12, pp. 3666-3679, Dec. 2011.
S. Lee, B. Choi, and C. T. Rim, “Dynamics characterization of the inductive power transfer system for online electric vehicles by Laplace phasor transform,” IEEE Trans. Power Electron., Vol. 28, No. 12, pp. 5902-5909, Dec. 2013.
C. T. Rim and G. H. Cho, “Phasor transformation and its application to the DC/AC analyses of frequency/phase controlled series resonant converters (SRC),” IEEE Trans. Power Electron., Vol. 5, No. 2, pp. 201-211, Apr. 1990.
C. T. Rim, D. Y. Hu, and G. H. Cho, “Transformers as equivalent circuits for switches: general proofs and D-Q transformation-based analysis,” IEEE Trans. Ind. Appl., Vol. 26, No. 4, pp. 777-785, Jul./Aug. 1990.
C. T. Rim, “Unified general phasor transformation for AC converters,” IEEE Trans. Power Electron., Vol. 26, No. 9, pp. 2465-2475, Sep. 2011.
C. B. Park, S. W. Lee, and C. T. Rim, “Static and dynamic analyses of three-phase rectifier with LC input filter by Laplace phasor transformation,” IEEE Energy Conversion Congress and Exposition (ECCE), pp. 1570-1577, 2012.
N. O. Sokal, K. K. Sum, and D. C. Hamill, “A capacitor-fed, voltage-step-down, single-phase, non-isolated rectifier,” IEEE Applied Power Electronics Conference and Exposition (APEC), pp. 208-215, 1998.
V. M. Rajović and N. S. Jovičić, “The capacitive divider power supply and its design problem,” IEEE 19 th Telecommunications Forum (TELFOR), pp. 852-855, 2011.
ENERGY STAR Program Requirements For Solid State Lighting Luminaires, Eligibility Criteria – Version 1.1, 2008.
Limits for Harmonic Current Emissions (Equipment Input Current ≤ 16A per Phase), IEC 61000-3-2 class C Std., 2009.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.