최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기복합신소재구조학회 논문집 = Journal of the Korean Society for Advanced Composite Structures, v.6 no.1, 2015년, pp.59 - 66
송현배 (포스코엔지니어링) , 김도균 (PETRONAS 공과대학교) , 최한석 (포항공과대학교) , 박규식 (포스코)
In this study, structural stability of large diameter high density polyethylene (HDPE) pipe during installation was numerically investigated in order to investigate the effect of concrete collar dimension, water depth and tension (pulling force). From the numerical simulation results, the total stre...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
HDPE 파이프의 장점은? | 1과 같이 HDPE(High Density Polyethylene) 파이프의 사용이 점차 증가하는 추세이다. 이러한 HDPE 파이프는 높은 부식저항성,경량성, 유연성, 제조용이성 등의 장점을 특징으로 하며, 강관에 비해 용이한 사용성, 간단한 설치방법, 상대적으로 긴 파이프 단위길이 등과 같은 특성으로 인해 특히 천해의 취수 설비에 그 사용량이 증가하고 있다. | |
HDPE 파이프의 원활한 설치를 위해 사전에 소요되는 견인력 범위를 계산해야 하는 이유는? | (2) 본 연구에서 고려된 콘크리트 칼라 예제를 통해 공기량이 증가 할수록 설치 가능한 견인력의 범위가 감소했으며, 일정 수심 이상에서는 설치가 불가능하였다. 따라서, HDPE 파이프의 원활한 설치를 위해서는 사전에 소요되는 견인력 범위를 계산해야 한다. | |
HDPE(High Density Polyethylene) 파이프의 사용이 증가하는 원인은? | 전 세계적으로 에너지 수요가 증가와 더불어, 발전소의 해수 취수 설비와 같은 장비들의 대형화가 급속도로 진행되고 있다. 과거에는 이러한 해수 취수 설비로 강관이나 콘크리트 파이프가 많이 사용되었으나 현재는 대구경화 되면서 Fig. 1과 같이 HDPE(High Density Polyethylene) 파이프의 사용이 점차 증가하는 추세이다. |
Anscombe, R. and Howard, M. (1993), "Installation of a polyethylene outfall pipeline," The 11th Australasian Conference on Coastal and Ocean Engineering. Queensland, Australia. pp. 269-274.
AWWA (2006), M55 PE Pipe - Design and Installation. American Water Works Association, Washington, D.C., USA.
DNV (1998), "On-bottom Stability Design of Submarine Pipeline," DNV-RP-E305, Det Norske Veritas, Oslo, Norway.
DNV (2010a), "Environmental Conditions and Environmental Loads," DNV-RP-C205, Det Norske Veritas, Oslo, Norway.
DNV (2010b), "On-bottom Stability Design of Submarine Pipelines," DNV-RP-F109, Det Norske Veritas, Oslo, Norway.
Grace, R. A. (2009), Marine Outfall Construction: Background, Techniques, and Case Studies. American Society of Civil Engineers (ASCE) Press, Reston, VA, USA.
ISO (2009), Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 1: Bolts, screws and studs with specified property classes -- Coarse thread and fine pitch thread (ISO 898-1). International Organization for Standardization, Geneva, Switzerland.
Jackson, L. A. (1984), "Large Diameter Polyethylene Submarine Outfalls," Coastal Engineering Proceedings, pp. 3148-3156.
Janson, L. E. (1990), "Review of design and experience with thermoplastic outfall piping," ASTM Special Technical Publication, pp. 336-343.
Orcina (2013), OrcaFlex User's manual version 9.6c. Orcina Ltd., Cumbria, UK.
PIPELIFE (2002), Technical Catalogue for Submarine Installations of Polyethylene Pipes. Pipelife Norge AS, Stathelle, Norway.
PPI (2006), Marine Installations, Plastics Pipe Institute (PPI), Irving, TX, USA.
Reiff, F. M. (2002), Small Diameter (HDPE) Submarine Outfalls. CEPIS, Washington, D.C., USA.
Roberts, P. J. W., Salsa, H. J., Reiff, F. M., Libhaber, M., Alejandre L. and Thomson, J. C. (2010), Marine Wastewater Outfalls and Treatment Systems. IWA Publishing, London, UK.
Shin, W. C. (2013), "Introduction of GHANA TAKORADI T2 Project Large HDPE Pipe Sinking Design," POSCO Engineering Technology Magazine, 29(1), pp. 46-57 (in Korean)
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.