최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국금형공학회지 = Journal of the Korea Society of Die & Mold Engineering, v.9 no.2, 2015년, pp.10 - 15
The water has been the suitable for the cooling medium until now. But the water as cooling medium seem to have the limit for high speed injection. The steam plastic molding injection use the steam as the medium when raise the mold temperature. The weld line has been the major quality problems in a p...
Satou Athusi, The sum of the mould for ultrsonic injection moulding, Die & Mold Technology, Vol. 2, Chomdan co., 2003.
Tuyu Agaotuto, An introduction for HighCycle Injection moulding, A committee of inquiry into Japan industry, 1997.
O.R.Kim, "A study on the performance Evaluation of Injection of Thin Wall Molding," Incheon Univ, Doctorate thesis, 2010.
Yunus A. Cengel, Michael A. Boles, Thermodynamics an engineering approach, McGrowHill, 2007.
Bruce.R Gregg(Edt), Bruce "Modern Materials and Manufacturing" Process Prentice-Hall, Inc., 2005.
J. C. Park, Byung H. Kim, Automatic Mold Design Methodology to Optimize Warpage and Weld Line in Injection Molded Parts, Trans. Mater. Proc., Vol. 9, pp. 512-525, 2000.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.