최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.32 no.5, 2015년, pp.447 - 454
이원균 (연세대학교 기계공학과) , 이찬영 (연세대학교 기계공학과) , 김주영 (연세대학교 기계공학과) , 송창규 (한국기계연구원 첨단생산장비연구본부) , 민병권 (연세대학교 기계공학과)
Design and application of hardware-in-the-loop simulation (HILS) for design of CNC-controlled machine tool feed drives is discussed. The CNC machine tool is a complex mechatronics system where the complexity results from the software-based controller composed of a variety of functionalities and adva...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
전용드라이브를 사용하는 CNC는 제어성능의 향상을 위해 무엇을 사용하는가? | 상용화된 개방형 CNC 제어기는 범용 서보드라이브로 구성되는 이송계를 제어하기 위해 다양한 인터페이스를 제공하므로 HILS 구성이 용이하다. 하지만 전용드라이브를 사용하는 CNC는 제어성능의 향상을 위해 일반적으로 제어기와 함께 서보드라이브, 모터를 패키지로 사용한다. 제어기에서는 보간, 각 축의 경로생성 및 위치제어를 수행하고, 각 축의 속도, 전류제어 및 필터링은 서보드라이브에서 수행한다. | |
CNC 제어 이송계의 시뮬레이션 기술의 목적은 무엇인가? | CNC 제어 이송계의 시뮬레이션 기술은 기계장비의 제어성능을 예측하고, 이를 이용하여 최적의 가공 조건과 제어기 설정을 얻는 것을 목적으로 한다.1,2 또한 CNC 공작기계를 설계하는 단계에서 제어성능을 예측하고, 이를 기반으로 기계장비 요소부품 및 제어기 파라미터를 선정함으로써 개발 시간과 비용을 효과적으로 줄이는 데 사용될 수 있다. | |
CNC 제어 이송계의 시뮬레이션 기술은 어디에 사용될 수 있는가? | CNC 제어 이송계의 시뮬레이션 기술은 기계장비의 제어성능을 예측하고, 이를 이용하여 최적의 가공 조건과 제어기 설정을 얻는 것을 목적으로 한다.1,2 또한 CNC 공작기계를 설계하는 단계에서 제어성능을 예측하고, 이를 기반으로 기계장비 요소부품 및 제어기 파라미터를 선정함으로써 개발 시간과 비용을 효과적으로 줄이는 데 사용될 수 있다.3,4 CNC 제어 이송계 시뮬레이션을 위해서는 이송계와 CNC 제어기의 모델이 필요하다. |
Yeung, C.-H., Altintas, Y., and Erkorkmaz, K., "Virtual CNC System. Part I. System Architecture," International Journal of Machine Tools and Manufacture, Vol. 46, No. 10, pp. 1107-1123, 2006.
Zhang, K., Yuen, A., and Altintas, A., "Pre- Compensation of Contour Errors in Five-Axis CNC Machine Tools," International Journal of Machine Tools and Manufacture, Vol. 74, pp. 1-11, 2013.
Erkorkmaz, K., Altintas, Y., and Yeung, C.-H., "Virtual Computer Numerical Control System," CIRP Annals-Manufacturing Technology, Vol. 55, No. 1, pp. 399-402, 2006.
Yun, W.-S. and Min, B.-K., "Development of Virtual CNC using a Software Based Open Architecture Controller," J. Korean Soc. Precis. Eng., Vol. 19, No. 6, pp. 23-28, 2002.
Landers, R. G., Min, B.-K., and Koren, Y., "Reconfigurable Machine Tools," CIRP Annals- Manufacturing Technology, Vol. 50, No. 1, pp. 269- 274, 2001.
Min, B.-K., Huang, Z., Pasek, Z. J., Yip-Hoi, D., Husted, F., et al., "Integration of Real-Time Control Simulation to a Virtual Manufacturing Environment," Journal of Advanced Manufacturing Systems, Vol. 1, No. 1, pp. 67-87, 2002.
Pritschow, G. and Rock, S., ""Hardware in the Loop" Simulation of Machine Tools," CIRP Annals- Manufacturing Technology, Vol. 53, No. 1, pp. 295- 298, 2004.
Gans, N. R., Dixon, W. E., Lind, R., and Kurdil, A., "A Hardware in the Loop Simulation Platform for Vision-Based Control of Unmanned Air Vehicles," Mechatronics, Vol. 19, No. 7, pp. 1043-1056, 2009.
Gietelink, O. J., Ploeg, J., De Schutter, B., and Verhaegen, M., "Development of a Driver Information and Warning System with Vehicle Hardware-in-the- Loop Simulations," Mechatronics, Vol. 19, No. 7, pp. 1091-1104, 2009.
Linjamaa, M, Virvalo, T., Gustafsson, J., Lintula, J., Aaltonen, V., et al., "Hardware-in-the-Loop Environment for Servo System Controller Design, Tuning and Testing," Microprocessors and Microsystems, Vol. 24, No. 1, pp. 13-21, 2000.
Choi, C. and Lee. W., "Analysis and Compensation of Time Delay Effects in Hardware-in-the-Loop Simulation for Automotive PMSM Drive System," IEEE Transactions on Industrial Electronics, Vol. 59, No. 9, pp. 3403-3410, 2012.
Lee, W., Jang, S., Lee, K. S., Min, B.-K., and Lee, S. J., "Development of Encoder Signal Generator for HIL Simulation of Servo Motor Controller," Proc. of KSPE Spring Conference, pp. 77-78. 2012.
Lee, T. H., Tan, K. K., and Huang, S., "Adaptive Friction Compensation with a Dynamical Friction Model," IEEE/ASME Transactions on Mechatronics, Vol. 16, No. 1, pp. 133-140, 2011.
Freidovich, L., Robertsson, A., Shiriaev, A., and Johansson, R., "LuGre-Model-Based Friction Compensation," IEEE Transactions on Control Systems Technology, Vol. 19, No.1, pp. 194-200, 2010.
De Wit, C. C., Olsson, H., Astrom, K. J., and Lischinsky, P., "A New Model for Control of Systems with Friction," IEEE Transaction on Automatic Control, Vol. 40, No. 3, pp. 419-425, 1995.
Lee, W., Lee, C.-Y., Jeong, Y. H., and Min, B.-K., "Distributed Component Friction Model for Precision Control of a Feed Drive System," IEEE/ASME Transactions on Mechatronics, No. 99, pp. 1-9, 2014.
Lee. W., Lee, C.-Y., and Min, B.-K., "Simulationbased Energy Usage Profiling of Machine Tool at the Component Level," Int. J. Precis. Eng. Manuf.-Green Tech., Vol. 1, No. 3, pp. 183-189, 2014.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.