본 논문에서는 94 GHz Gunn 고정발진기를 설계 및 제작하였고, 이를 이용하여 발진기에 사용된 Gunn 다이오드의 최대 전력을 조사하였다. 94 GHz Gunn 고정발진기는 InP Gunn 다이오드가 사용되었고, WR-10 도파관 구조로 설계 및 제작되었다. 제작된 발진기는 발진주파수 95 GHz에서 12.64 dBm의 출력 전력과 1 MHz 오프셋 주파수에서 -92.7 dBc/Hz의 위상잡음 성능을 보였다. 발진기에 사용된 InP Gunn 다이오드의 최대 전력을 조사하기 위해서 발진기 구조를 턱이 있는 구조로 수정하였다. 그리고 이 턱의 높이를 변화시켜, 발진기가 몇 가지의 다른 부하 임피던스를 갖도록 하였다. 이 몇 가지의 다른 부하 임피던스에 대한 결과로써, 포스트 면에서의 부하 실수부 $G_L$에 대한 발진 신호 $V^2$의 그래프를 얻었다. 이 $G_L-V^2$의 그래프를 이용하여, 바이어스 포스트의 손실이 포함된 Gunn 다이오드의 최대 전력 16.8 dBm을 얻었다. 그리고 short된 Gunn 다이오드와 제로 바이어스 상태의 Gunn 다이오드를 이용하여 바이어스 포스트의 손실을 계산하였다. 바이어스 포스트의 손실을 보상한 InP Gunn 다이오드만의 최대 전력은 95 GHz에서 18.55 dBm이다. 이는 사용된 Gunn 다이오드의 데이터시트에 가까운 결과이다.
본 논문에서는 94 GHz Gunn 고정발진기를 설계 및 제작하였고, 이를 이용하여 발진기에 사용된 Gunn 다이오드의 최대 전력을 조사하였다. 94 GHz Gunn 고정발진기는 InP Gunn 다이오드가 사용되었고, WR-10 도파관 구조로 설계 및 제작되었다. 제작된 발진기는 발진주파수 95 GHz에서 12.64 dBm의 출력 전력과 1 MHz 오프셋 주파수에서 -92.7 dBc/Hz의 위상잡음 성능을 보였다. 발진기에 사용된 InP Gunn 다이오드의 최대 전력을 조사하기 위해서 발진기 구조를 턱이 있는 구조로 수정하였다. 그리고 이 턱의 높이를 변화시켜, 발진기가 몇 가지의 다른 부하 임피던스를 갖도록 하였다. 이 몇 가지의 다른 부하 임피던스에 대한 결과로써, 포스트 면에서의 부하 실수부 $G_L$에 대한 발진 신호 $V^2$의 그래프를 얻었다. 이 $G_L-V^2$의 그래프를 이용하여, 바이어스 포스트의 손실이 포함된 Gunn 다이오드의 최대 전력 16.8 dBm을 얻었다. 그리고 short된 Gunn 다이오드와 제로 바이어스 상태의 Gunn 다이오드를 이용하여 바이어스 포스트의 손실을 계산하였다. 바이어스 포스트의 손실을 보상한 InP Gunn 다이오드만의 최대 전력은 95 GHz에서 18.55 dBm이다. 이는 사용된 Gunn 다이오드의 데이터시트에 가까운 결과이다.
In this paper, design and implementation of the 94 GHz Gunn oscillator and the evaluation of the maximum power of the Gunn diode used in the oscillator are presented. The 94 GHz Gunn oscillator is used InP Gunn diode and designed employing a WR-10 waveguide. The designed oscillator is fabricated thr...
In this paper, design and implementation of the 94 GHz Gunn oscillator and the evaluation of the maximum power of the Gunn diode used in the oscillator are presented. The 94 GHz Gunn oscillator is used InP Gunn diode and designed employing a WR-10 waveguide. The designed oscillator is fabricated through machining and its performance is measured. The fabricated oscillator shows an oscillation frequency of 95 GHz, output power of 12.64 dBm, and phase noise of -92.7 dBc/Hz at 1 MHz offset frequency. To evaluation the maximum power of the InP Gunn diode used in oscillator, the oscillator structure is modified to a structure having a diaphram. The height of thick diaphram which is used in the oscillator is varied. As a result, an oscillator has several different load impedances, which makes it possible to plot $G_L-V^2$ plot at the post plane. Using the $G_L-V^2$ plot, the maximum power of used Gunn diode including post is computed to be 16.8 dBm. Furthermore using the shorted and zero bias Gunn diode, the post loss used for DC biasing can be computed. Using the two losses, The maximum power of a InP Gunn diode is computed to be 18.55 dBm at 95 GHz. This result is close to a datasheet.
In this paper, design and implementation of the 94 GHz Gunn oscillator and the evaluation of the maximum power of the Gunn diode used in the oscillator are presented. The 94 GHz Gunn oscillator is used InP Gunn diode and designed employing a WR-10 waveguide. The designed oscillator is fabricated through machining and its performance is measured. The fabricated oscillator shows an oscillation frequency of 95 GHz, output power of 12.64 dBm, and phase noise of -92.7 dBc/Hz at 1 MHz offset frequency. To evaluation the maximum power of the InP Gunn diode used in oscillator, the oscillator structure is modified to a structure having a diaphram. The height of thick diaphram which is used in the oscillator is varied. As a result, an oscillator has several different load impedances, which makes it possible to plot $G_L-V^2$ plot at the post plane. Using the $G_L-V^2$ plot, the maximum power of used Gunn diode including post is computed to be 16.8 dBm. Furthermore using the shorted and zero bias Gunn diode, the post loss used for DC biasing can be computed. Using the two losses, The maximum power of a InP Gunn diode is computed to be 18.55 dBm at 95 GHz. This result is close to a datasheet.
이와 같은 밀리미터파(30~300 GHz) 발진기에는 최근 반도체 공정기술의 발전으로 인하여 MOSFET이나 BJT 또는 HEMT와 같은 3단자 소자도 이용되고 있지만[7], 가격과 출력 전력 측면에서 아직은 IMPATT나 Gunn 다이오드와 같은 2단자 소자가 많이 쓰이고 있다.
IMPATT나 Gunn 다이오드를 발진기 소자로 사용할 수 있는 이유는?
IMPATT나 Gunn 다이오드는 밀리미터파에서 부성저항 특성 갖기 때문에 발진기 소자로 사용될 수 있다. 하지만 IMPATT 다이오드의 경우 효율은 좋으나, 잡음특성이 좋지 못해 발진기에는 잘 사용되지 않는다.
IMPATT나 Gunn 다이오드의 장단점은?
IMPATT나 Gunn 다이오드는 밀리미터파에서 부성저항 특성 갖기 때문에 발진기 소자로 사용될 수 있다. 하지만 IMPATT 다이오드의 경우 효율은 좋으나, 잡음특성이 좋지 못해 발진기에는 잘 사용되지 않는다. 이에 반해, Gunn 다이오드는 소자의 수명이 뛰어나고 높은 출력을 가지며, 잡음 또한 적어 발진기에 많이 이용되고 있다.
참고문헌 (12)
D. S. Ko, M. K. Lee, S. J. Lee, Y. H. Baek, T. J. Baek, W. S. Sul, Y. S. Chae, E. H. Rhee, W. J. Kim. S. D. Kim, and J. K. Rhee, "94 GHz waveguide VCO using InP Gunn diode for FMCW radar application", Asia- Pacific Microwave Conference 2008, pp. 1-4, Dec. 2008.
John E. Carlstrom, Richard L. Plambeck, and D. D. Thornton, "A continuosly tunable 65-115 GHz Gunn oscillator", IEEE Trans. on Microwave Theory and Techniques, vol. MTT-33, no. 7, Jul. 1985.
Yu-Wen Chang, "Millimeter-wave(W-band) quartz image guide Gunn oscillator", IEEE Trans. on Microwave Theory and Techniques, vol. MTT-31, no. 2, Feb. 1983.
N. Priestley, K. Newsome, I. Dale, and P. Norton, "A Gunn diode based surface mount 77 GHz oscillator for automotive application", Microwave Symposium Digest, 2002 IEEE MTT-S International, vol. 3, pp. 1863-1866, Jun. 2002.
W. H. Haydl, "Fundamental and harmonic operation of millimeter-wave Gunn diodes", IEEE Trans. on Microwave Theory and Techniques, vol. MTT-31, no. 11, Nov. 1983.
W. H. Haydl, R. Bosch, and J. Rudiger, "Waveguide/resonant- disc circuits for millimeter-wave devices", Electronics Letters, vol. 18, pp. 307-308, Apr. 1982.
M. S. Heins, T. Juneja, J. A. Fendrich, J. Mu, D. Scott, Q. Yang, M. Hattendorf, G. E. Stillman, and M. Feng, "W-band InGaP/GaAs HBT MMIC frequency sources", Microwave Symposium Digest, 1999 IEEE MTT-S International, vol. 1, pp. 239-242, Jun. 1999.
B. K. Ridley, "Anatomy of the transferred-electron effect in III-V semiconductors", J. Applied Phys., vol. 48, no. 2, pp. 754-764, Feb. 1995.
김종년, 김인석, "24 GHz 공진기 안정화 Gunn 발진기개발", 한국전자파학회논문지, 12(2), pp. 176-183, 2001년 2월.
S. J. Jerome Teng, Robert E. Goldwasser, "High-performance second-harmonic operation W-band GaAs Gunn diodes", IEEE Electron Device Letters, vol. 10, no. 9, pp. 412-414, Sep. 1989.
D. S. Ko, S. W. Moon, M. K. Lee, S. J. Lee, D. H. Ko, S. H. Bang, Y. H. Baek, M. Han, S. G. Choi, T. J. Baek, S. D. Kim and J. K. Rhee, "94 GHz waveguide VCO with Magic_T for FMCW radar", 38th European Microwave Conference, pp. 1234-1237, Oct. 2008.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.