최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국산학기술학회논문지 = Journal of the Korea Academia-Industrial cooperation Society, v.16 no.5, 2015년, pp.3627 - 3632
비라즈 둔가나 (공주대학교 신소재공학부) , 손영곤 (공주대학교 신소재공학부)
We investigated mechanical, rheological and electrical properties of graphite/PP/LCP composites for a bipolar plate of the polymer electrolyte membrane fuel cell. The composites containing very low molecular weighted PP showed much higher electrical conductivity compared with other thermoplastics. T...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
분리판 소재에 금속이나 흑연을 적용시키기 어려운 이유는? | 연료전지에 사용되는 분리판 소재에는 금속, 흑연 판 등 여러 재료가 시도되었으나, 금속과 흑연과 같은 재료들은 대량 생산이 가능하지 않아 제조된 연료전지의 가격이 매우 높다는 제약이 있어왔다 [1, 2]. 저가의 분리판을 제조하기 위해서는 사출성형과 같이 대량 생산이 가능한 새로운 재료가 필요하게 되었고, 이런 요구에 맞추어 흑연과 고분자를 복합화하고 사출성형을 통하여 복잡한 유로형상을 성형하는 기술에 대한 관심이 높아지고 있다. | |
기존의 분리판처럼 전도성을 위해 흑연을 70 vol.% 이상 투입하고 고분자는 30 vol.% 이내로 혼합할 경우 어떠한 한계가 존재하는가? | % 이내로 혼합하여야 원하는 전도성이 얻어진다 [3,4,5]. 이렇게 제조된 복합재료의 유동성은 원하는 바와 달리 일반적인 고분자에 비해 현저히 낮은 정도로 제한된다 [6]. 따라서 원래 목표인 사출성형이 가능할 정도의 고유동성을 얻기 위해서는 전기 전도도의 희생 없이 바인더로 쓰이는 고분자의 양을 더욱 높이거나, 특수한 가공방법으로 고점도의 재료를 이용하여 분리판을 대량 생산하여야 한다. | |
PP의 함량의 증가는 전기전도도에 어떠한 영향을 미치는가? | 2에 흑연/PP 복합재료의 전기전도도를 나타냈다. PP의 함량이 증가함에 따라 전기전도도가 감소하는 전형적인 형태를 볼 수 있다 (fig. 1a). |
E. A. Choi, I. H. Oh "Current R&D Issues on Bipolar Plates of PEMFC", Polymer Science and Technology, Vol. 15, 612-617 (2004). DOI: http://dx.doi.org/10.9713/kcer.2012.50.1.118
R. A. Antunes, M. C. L. de Oliveira, G. Ett, V. Ett, "Carbon materials in composite bipolar plates for polymer electrolyte membrane fuel cells: A review of the main challenges to improve electrical performance", Journal of Power Sources, Vol. 196, pp. 2945-2961 (2011). DOI: http://dx.doi.org/10.1016/j.jpowsour.2010.12.041
L. G. Xia, A. J. Li, W. Q. Wang, Q. Yin, H. Lin, Y. B. Zhao, "Effects of resin content and preparing conditions on the properties of polyphenylene sulfide resin/graphite composite for bipolar plate", J. Power Sources, Vol. 178, pp. 363-367 (2008). DOI: http://dx.doi.org/10.1016/j.jpowsour.2007.11.094
S. I. Heo, J. C. Yun, K. S. Oh, K. S. Han, "Influence of particle size and shape on electrical and mechanical properties of graphite reinforced conductive polymer composites for the bipolar plate of PEM fuel cells", Adv. Compos. Mater., Vol. 15, No. 1, pp. 115-126, (2006). DOI: http://dx.doi.org/10.1163/156855106776829356
T. Yang, P. Shi, "Study on the mesocarbon microbeads/polyphenylene sulfide composite bipolar plates applied for proton exchange membrane fuel cells", J. Power Sources, Vol. 175, No. 1, pp. 390-396 (2008). DOI: http://dx.doi.org/10.1016/j.jpowsour.2007.08.113
Q. Wang, J. Gao, R. Wang, Z. Hua, "Mechanical and rheological properties of HDPE/graphite composite with enhanced thermal conductivity", Polymer Composites, Vol. 22, pp. 97-103 (2001). DOI: http://dx.doi.org/10.1002/pc.10521
H. Geng, K. K. Kim, K. P. So, Y. S. Lee, Y. Chang, Y. H. Lee, "Effect of Acid Treatment on Carbon Nanotube-Based Flexible Transparent Conducting Films", J. Am. Chem. Soc., Vol. 129 No. 25, pp. 7758-7759 (2007). DOI: http://dx.doi.org/10.1021/ja0722224
F. Mighri, M. A. Huneault, M. F. Champagne, "Electrically Conductive Thermoplastic Blends for Injection and Compression Molding of Bipolar Plates in the Fuel Cell Application", Polm. Eng. Sci., Vol. 44, No. 9 pp. 1755-1765 (2004). DOI: http://dx.doi.org/10.1002/pen.20177
T. Villmow, S. Pegel, P. Potschke, U. Wagenknecht, "Influence of injection molding parameters on the electrical resistivity of polycarbonate filled with multi-walled carbon nanotubes", Composites Science and Technology, Vol. 68, pp. 777-789 (2008). DOI: http://dx.doi.org/10.1016/j.compscitech.2007.08.031
J. Huang, "Carbon Black Filled Conducting Polymers and Polymer Blends", Advances in Polymer Technology, Vol. 21, No. 4, pp. 299-313 (2002). DOI: http://dx.doi.org/10.1002/adv.10025
James E. Mark, "Polymer data handbook", Oxford University Press Inc. (1999).
A. Goldel, G. Kasaliwal, P. Potschke, "Selective Localization and Migration of Multiwalled Carbon Nanotubes in Blends of Polycarbonate and Poly(styrene-acrylonitrile)", Macromol. Rapid Commun., Vol. 30, pp. 423-429 (2009). DOI: http://dx.doi.org/10.1002/marc.200800549
Younggon Son, "Crystallization Behavior and Mechanical Properties of High Density Polyethylene/metallocene catalyzed Poly(ethylene-co-octene) Blends", Journal of The Korea Academia-Industrial cooperation Society, Vol. 14, No. 6, pp. 3108-3113 (2013). DOI: http://dx.doi.org/10.5762/KAIS.2013.14.6.3108
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.