최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기照明·電氣設備學會論文誌 = Journal of the Korean Institute of Illuminating and Electrical Installation Engineers, v.29 no.12, 2015년, pp.55 - 60
이승재 , 조만영 (조엔지니어링) , 김세용 (조엔지니어링 계통기술팀) , 김은태 (조엔지니어링 계통기술팀) , 강병욱 (숭실대학교 대학원) , 박한민 (숭실대학교 대학원 전기공학과) , 김재철
PG and RG methods are widely known method for calculating the capacity of the emergency generator in construction electrical installation. PG and RG methods are mainly used as a saving a life, fire protection, fire fighting in construction. Because no long distance between the emergency generator an...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
화학 플랜트의 경우 PG법과 RG법 적용이 어려운 이유는 무엇인가? | 그러나 화학 플랜트의 경우는 유도 전동기 용량이 큰 경우가 많다. 또한 비상 발전기와 전동기 부하까지의 거리가 비교적 길고, 전동기 기동방법은 전전압 기동이 대부분이다. 비상발전 계통에서 유도 전동기의 기동중인 상태는 극심한 지상부하인 상태임과 동시에 동기발전기의 독립운전 형태이고, 발전기에서는 전기자 반작용이 심화되는 상태인 것이다[3]. 또한 무효전력(Q) 전송은 전압(E)과 매우 밀접하고, Q ∝ E2 관계가 존재한다[4]. 또한 유도전동기 기동은 큰 폭의 전압감소를 야기하고, 이 전압강하는 유도전동기 기동 토크 부족의 원인이 된다[5]. 이러한 이유로 PG법, RG법으로 비상 발전기 용량을 적용하는데 한계가 있음을 확인하였다. | |
비상 발전기 용량선정을 위해 사용하는 방법은 무엇인가? | 따라서 화학 플랜트에서는 비상 발전기 용량도 상당히 큰 경우가 많다. 이때 비상 발전기 용량선정을 위해 일반 건축물에서 사용되는 비상 발전기 용량 계산법인 PG 법, RG법을 많이 사용해왔다. 일반건축물에서는 비상 발전기에서 부하까지의 거리가 길지 않다. | |
유도전동기 기동 시 발생하는 문제는 무엇인가? | 또한 무효전력(Q) 전송은 전압(E)과 매우 밀접하고, Q ∝ E2 관계가 존재한다[4]. 또한 유도전동기 기동은 큰 폭의 전압감소를 야기하고, 이 전압강하는 유도전동기 기동 토크 부족의 원인이 된다[5]. 이러한 이유로 PG법, RG법으로 비상 발전기 용량을 적용하는데 한계가 있음을 확인하였다. |
Ho-Jun. Lee, "A study on selection methods of emergency generator capacity for various building electrical loading system", M.S. dissertation, Hanyang University, 2015. 2.
KOREA LAND & HOUSING CORPORATION, "A Study on the Capacity Estimation Methods for the Emergency Electric Generators", 1995.12.
Sang-Don. Kim, "The Research of Industrial Plant Synchronous Generators Operation Characteristics and Performance Tests", M.S. dissertation, Korea University, 2014. 6.
P. Kundur, Power System Stability and Control, McGraw-Hill, Inc., pp. 224, pp254, 1994.
WAYNE T.HOAN, and MARK CHOW, "Transient Stability Analysis for Sohio Prudhoe Bay Eemeragency Power System", IEEE Transactions on Industry Applications, Vol. IA-22, No.4, p.430-p.434, May/June 1986.
M.M.Adibi, and D.P.Milanicz, SM, "Reactive Capability Limitation of Synchronous Machines", IEEE Transactions on Powr systems, Vol.9, No.1, p.29-p.40, February 1994.
J. Y. JACKSON, "Interpretation and Use of Generator Reactive Capability Diagram", IEEE Transactions on Industry and General Applications, Vol. IGA-7, No.6, p.729 - p.732, November/December 1971.
"IEEE Recommended Practice for Industrial and Commercial Power System Analysis", 9.2.2, The Institute of Electrical and Electronics Engineers, Inc. IEEE Std 399-1997.
"IEEE Guide for Abnormal Frequency Protection for Power Generating Plants", 4.2.2, The Institute of Electrical and Electronics Engineers, Inc. IEEE Std C37.106-2003.
"Rotating electrical machines-Part 3 : Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines, 4.6", The International Electro-technical Commission(IEC). IEC 60034-3-2007.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.