최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. A. A, v.39 no.7, 2015년, pp.681 - 686
백종수 (공주대학교기계자동차공학부) , 강재영 (공주대학교기계자동차공학부)
The onset characteristics of friction-induced noise for a steel plate and 4 metallic pins (Cu, Ni, Al, Mg) were studied through the pin-on-disk machine and the reciprocating testing machine. The results showed that the negative slope of the friction curve was related to the onset time of friction no...
Jibiki, T., Shima, M., Akita, H. and Tamura, M., 2001, "A Basic Study of Friction Noise Caused by Fretting," Wear, Vol. 251, No. 1-12, pp. 1492-1503.
Autay, R., Kchaou, M. and Dammak, F., 2012, "Friction and Wear Behavior of Steels under Different Reciprocating Sliding Conditions," Tribology Transactions, Vol. 55, No. 5, pp. 590-598.
Chen, G. X., Zhou, Z. R. and Leo, V., 2002, "Effect of Surface Topography on Formation of Squeal under Reciprocating Sliding," Wear, Vol. 253, No. 3-4, pp. 411-423.
Nam, J. and Kang, J., 2012, "Investigation of Friction Noise with Respect to Friction Curve by Using FEM and Its Validation," Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 24, No. 1,. pp. 28-34.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.