최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국기계가공학회지 = Journal of the Korean Society of Manufacturing Process Engineers, v.14 no.3, 2015년, pp.1 - 8
최재원 (애크런대학교 기계공학과) , 김호찬 (안동대학교 기계자동차공학과)
Recently, a great interest in 3D printing has emerged, although many existing 3D printing technologies were first developed 2-3 decades ago. There are many mature 3D printing processes and materials; however, active research and development efforts are ongoing in this area to advance the technologie...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
분말 베드 방식의 단점은? | 분말 베드 방식에 비해서 노즐 및 레이저의 위치 이동의 수월성 때문에 가공의 자유도가 뛰어나다. 예를 들면, 분말 베드 방식에서는 기존 부품을 보수하는 것이 쉽지 않은 반면, 이 방식에서는 기존 부품의 크랙 및 손상이 있는 부분을 쉽게 수리할 수 있다. 국내에서는 Insstek사에서 이 장비를 개발 및 생산하고 있다. | |
재료 제팅 공정이란? | 이 방식은 실제 형상을 이루는 재료를 일반 2차 원 종이 인쇄처럼 제팅함으로써 단면을 제작하는 방식이다. 이 제팅 기술의 핵심은 액적(droplet)을 형성하는 방법이며, 이는 크게 가열을 통한 버블젯 (bubble-jet) 방식과 피에조 엑츄에이터를 이용하는 방식이 있다. | |
3D프린팅에서 압출 공정이란? | 거의 대부분의 압출 공정은 필라멘트 형태의 열가소성 플라스틱 재료를 녹는점 이상의 온도에서 가는 노즐을 통해서 압출함으로 원하는 단면 형상을 제작한다. 이는 일반 공작기계처럼 xyz 스테이지와 재료 압출 헤드를 동시에 제어함으로써 2차원 단면 형상을 적층하여 최종적으로 3차원 형상을 제작한다. |
http://manufacturing.gov/nnmi.html
Malone, E. and Lipson, H., "Fab@Home: the personal desktop fabricator kit," Rapid Prototyping Journal, Vol. 13, No. 4, pp. 245-255, 2007.
Jeong, H.J., Jee, M.H., Kim, H.Y. and Lee, S.J., "Measurement of the compressive force on the knee joint model fabricated by 3D printing," KSMPE, Vol. 13, No. 2, pp. 1-7, 2014.
Lee, I.H. and Cho, D.W., "Microstereolithography photopolymer solidification patterns for various laser beam exposure conditions," International Journal of Advanced Manufacturing Technology, Vol. 22, pp. 410-416, 2003.
Choi, J.W., Wicker, R.B., Choi, S.H., Ha, C.S. and Lee, S.H., "Cure depth control for comlex 3D microstructure fabrication in dynamic mask projection microstereolithography," Rapid Prototyping Journal, Vol. 15, No. 1, pp. 59-70, 2009.
Tumbleston, J.R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A.R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J.P., Ermoshkin, A., Samulski, E.T. and DeSimone J.M., "Continuous liquid interface production of 3D objects," Science, Vol. 247, No. 6228, pp. 1349-1352, 2015.
http://carbon3d.com
http://senvol.com
Ge, Q., Qi, H.J. and Dunn, M.L., "Active materials by four-dimension printing," Applied Physics Letters, Vol. 103, pp. 131901(1-5), 2013.
Campbell, T.A., Tibbits, S. and Garrett, B., "The next wave: 4D printing programming the material world," Atlantic Council, Brent Scowcroft Center on International Security, 2015.
MacDonald, E., Salas, R., Espalin, D., Perez, M., Aguilera, E., Muse, D. and Wicker, R.B., "3D Printing for the Rapid Prototyping of Structural Electronics," IEEE, Vol. 2, pp. 234-242, 2014.
Zhuo, Y., Alvarez, C. and Feldmann, K., "An integrated design system for molded interconnect devices (3d-Mid)," Digital Enterprise Technology, Springer, pp. 193-200, 2007.
Vatani, M., Lu, Y., Engeberg, E.D. and Choi, J.W., "Combined 3D printing technologies and materials for fabrication of tactile sensors," International Journal of Precision Engineering and Manufacturing, Vol. 16, No. 17, pp. 1375-1383, 2015.
Vatani, M., Engeberg, E.D. and Choi, J.W., "Detection of the position, direction, and speed of sliding contact with a multi-layer compliant tactile sensor fabricated using direct-print technology," Smart Materials and Structures, Vol. 23, pp. 0905008 (11pp), 2014.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.