최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Fashion & textile research journal = 한국의류산업학회지, v.17 no.3, 2015년, pp.462 - 475
김현아 (한국패션산업연구원) , 손황 ((주)송이실업) , 김승진 (영남대학교 융합섬유공학과)
This paper investigated the characteristics of the physical properties of woven fabrics according to the yarn structure and fibre property. It was found that wicking property of woven fabrics made of sheath/core hybrid yarn were better than those of siro spun and siro-fil hybrid yarns, which was cau...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
sheath/core 방적사는 어디에서 생산가능한가? | 그런데 화섬 필라멘트와 천연 스테이플 섬유를 복합한 하이브리드복합사는 기존의 ring 정방기와 siro-spun 방적 시스템에서 만들어지며 이들 복합사들은 sheath/core ring 방적사 혹은 siro-fil 방적사로 불려지고 있다. sheath/core 방적사는 ring 정방기와 siro 정방기에서 모두 생산가능하다. 그러나 siro-fil사는 일반적으로 siro 정방시스템에서 siro component의 한쪽에 필라멘트를 피드시켜 만들어 진다. | |
siro-fil사는 어떻게 만들어지는가? | sheath/core 방적사는 ring 정방기와 siro 정방기에서 모두 생산가능하다. 그러나 siro-fil사는 일반적으로 siro 정방시스템에서 siro component의 한쪽에 필라멘트를 피드시켜 만들어 진다. siro 방적사는 ring 방적사에 비해 생산비용이 낮은 장점이 있으나 실의 구조 특성 차이에 따른 직·편물의 물성에는 어떤 차이가 있는가에 대한 많은 연구가 최근까지도 진행되어 왔다(Bedez & Ureyen, 2007; Icoglu, 2011; Liu et al. | |
경사 sheath-core사 구조에 위사를 coolmax/텐셀 방적사를 사용한 직물의 건조특성이 가장 우수한 이유는? | 종합적으로 하이브리드 복합사 직물에서 수분이동에 관계되는 wicking성이 우수한 직물의 설계를 위해서는 경사와 위사에 sheath-core사를 사용하는 것이 바람직하며 건조특성은 경사 sheath-core사 구조에 위사를 coolmax/텐셀 방적사를 사용한 직물이 가장 우수하였다. 이것은 core부의 필라멘트가 수분이동을 쉽게 해주는 통로로서 심지역할을 하게 된 것에 기인하는 것으로 추정된다. 반면 습열이동에 관계되는 투습도는 경사가 하이브리드복합사를 사용할 때 위사는 하이멀티 필라멘트사를 사용한 경우 투습도가 가장 우수하며 열전도도는 경사에 하이 브리드 복합사, 그리고 위사를 siro-fil사를 사용할 때 가장 높은 값을 보여 착용 쾌적성이 우수한 복합사 직물을 제조할 수 있다는 것을 확인하였다. |
Adler, M. M., & Walsh, W. H. (1984). Mechanism of transient moisture transport between fabrics. Textile Research Journal, 54(5), 334-343. doi:10.1177/004051758405400510
Bedez, T., & Ureyen, M. E. (2007). Spinning of short staple fibres by siro $spun^{(R)}$ system. Tekstil ve Konfeksiyon, 17(1), 31-35.
CSIRO, Cool light weight wools, Australia. Available from http://www.csiro.au/files/files/p9u3.pdf (assessed 14 September 2009).
Ghali, K., Jones, B., & Tracy, J. (1994). Experimental techniques for measuring parameters describing wetting and wicking in fabrics. Textile Research Journal, 64(2), 106-111. doi:10.1177/004051759406400206
Hiraku, I., & Yoichiro, M. (1993). Water transport along textile fibers as measured by an electrical capacitance technique. Textile Research Journal, 62(7), 414-420. doi:10.1177/004051759306300706
Hsieh, Y. L. (1995). Liquid transport in fabric structure. Textile Research Journal, 65(5), 299-307. doi:10.1177/004051759506500508
KSK ISO 11092: 2009 http://www.kats.go.kr.
Lee, A. (2006). Absorption desorption behavior of quick sweat-pick up/dry-fabric and assessment of subjective wetness using JND measurement. Unpublished master's thesis, Yonsei University, Seoul.
Lee, D. W., & Kim, E. A. (2001). The relationship between pore size distribution and liquid water transport of cotton and polyester fabrics. Journal of the Korean Society of Clothing and Textiles, 25(2), 379-388.
Liu, W. Y., Yu, Y. P., He, J. H., & Wang, S. Y. (2007a). Effect of strand-spacing between roving and filament on siro-fil yarn properties. Textile Research Journal, 77(4), 200-204. doi:10.1177/0040517507080614
Liu, W. Y., Yu, Y. P., He, J. H., & Wang, S. Y. (2007b). Effect of tension compensator on sirofil yarn properties. Textile Research Journal, 77(4), 195-199. doi:10.1177/0040517507080624
Liu, S., Liu, J., Jia, H., Liu, X., & Xu, B. (2012). Effect of sirospun spinning with a press bar top pin on gualities of flax/cotton blended yarn. Textile Research Journal, 82(10), 985-993. doi: 10.1177/0040517511427972
McGregor, B. A., & Naebe, M. (2013). Effect of fiber, yarn and knitted fabric attributes associated with wool comfort properties. Journal of Textile Institute, 104(6), 606-617. doi:10.1080/00405000.2013.770596
Miao, M., Barnes, S., & Vuckovic, L. (2010). High-speed video graphic study of filament-core yarn spinning. Journal of Textile Institute, 101(3), 242-252. doi:10.1080/00405000802376179
Nyoni, A. B., & Brook, D. (2006). Wicking mechanisms in yarns -the key to fabric wicking performance. Journal of Textile Institute, 97(2), 119-128. doi:10.1533/joti.2005.0128
Pack, S. L. (1995). Effect of yarn type and twist on air permeability, absorbancy, and hand properties of open-end and ring-spun yarn fabrics. Journal of Textile Institute, 86(4), 581-589. doi:10.1080/00405009508659036
Patil, U. J., Kane, C. D., & Ramesh, P. (2009). Wickability behaviour of single-knit structure. Journal of Textile Institute, 100(5), 457- 465. doi:10.1080/00405000801893240
Pourahmad, A., & Johari, M. S. (2011a). Comparison of the properties of ring, solo, and siro core-spun yarns. Journal of Textile Institute, 102(6), 540-547. doi:10.1080/00405000.2010.498170
Pourahmad, A., & Johari, M. S. (2009b). Production of core spun yarn by three-strand modified method. Journal of Textile Institute, 100(3), 275-281. doi:10.1080/00405000701763865
Sawhney, A. P. S., Robert, K. Q., Ruppenicker, G. F., & Kimmel, L. B. (1992). Improved method of producing a cotton/polyester staple core yarn on a ring spinning frame. Textile Research Journal, 62(1), 21-25. doi:10.1177/004051759206200104
Soltani, P., & Johari, M. S. (2012). A study on siro-, solo-, compact-, and conventional ring spun yarns. Part II: yarn strength with relation to physical and structural properties of yarns. Journal of Textile Institute, 103(9), 921-930. doi:10.1080/00405000.2011.628117
Tashkandi, S., Wang, L., & Kanesalingam, S. (2013). An investigation of thermal comfort properties of Abaya woven fabrics. Journal of Textile Institute, 104(8), 830-837. doi:10.1080/00405000.2012.758351
Varshney, R. K., Kothari, V. K., & Dhamija, S. (2010). A study on thermophysiological comfort properties of fabrics in relation to constituent fibre fineness and cross-sectional shapes. Journal of Textile Institute, 101(6), 495-505. doi:10.1080/00405000802542184
Xia, Z., Wang, X., Ye, W., Eltahir, H. A., & Xu, W. (2012). Fiber trapping comparison of embeddable and locatable spinning with siro fil and siro core-spinning with flute pipe air suction. Textile Research Journal, 82(12), 1255-1262. doi:10.1177/0040517512439918
Zang, L. N., & He, J. H. (2009). Geometry condition for optimal twostrand yarn spinning part I: Siro spun. Textile Research Journal, 79(3), 243-246. doi:10.1177/0040517507080533
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.