최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기마이크로전자 및 패키징 학회지 = Journal of the Microelectronics and Packaging Society, v.22 no.2, 2015년, pp.33 - 39
한우제 (연세대학교 신소재공학과) , 유병욱 (한국전자부품연구원) , 박형호 (연세대학교 신소재공학과)
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
BaTiO3의 장점은? | 12,13) 타이타늄산바륨 (BaTiO3)는 페로브스카이트(perovskite)형 구조 화합물로써 고유전 성질을 갖고 있어 전자 부품용 소형 고성능 소자로 응용될 수 있다. 15) BaTiO3의 경우 고유전율을 갖고 강유전체가 갖는 분극반전시 피로특성을 나타내지 않아 주파수 및 온도 변화에 따른 유전특성 및 절연특성이 우수하다. 이러한 고유전 재료의 응용을 위해 나노입자화 기술이 필수적이다. | |
타이타늄산바륨이란? | 타이타늄산바륨($BaTiO_3$)은 대표적인 강유전 물질로 유전상수가 200 이상의 값을 나타내는 물질이다. 타이타늄산바륨을 나노입자화하면 나노커패시터(nanocapacitors)와 강유전체 메모리(ferroelectric random access memories)와 같이 여러 용도로 응용 가능하다. | |
침전법의 단점은? | 16-25)침전법은 여러가지 다른 이온들을 수용액 혹은 비수용액에서 동시에 침전 시키는 방법이다. 이 경우 불용성의 수산염, 탄산염 혹은 옥살산염 등이 미세하게 혼합 분산되어 동시에 석출되는 단점이 발생 할 수 있다. 24)이러한 과정은 알콕사이드를 원료로 사용하는 점과 가수 분해반응을 이용한다는 점에서 sol-gel법과 유사하다. |
O. Carny, D. E. Shalev and E. Gazit, "Fabrication of Coaxial Metal Nanocables Using a Self-Assembled Peptide Nanotube Scaffold", Nano Lett., 6(8), 1594 (2006).
X. Wang and Y. Li, "Rare-Earth-Compound Nanowires, Nanotubes and Fullerene-Like Nanoparticles: Synthesis, Characterization and Properties", Chem. Eur. J., 9(22), 5627 (2003).
Q. Lu, F. Gao and D. Zhao, "One-Step Synthesis and Assembly of Copper Sulfide Nanoparticles to Nanowires, Nanotubes and Nanovesicles by a Simple Organic Amine-Assisted Hydrothermal Process", Nano Lett., 2(7), 725 (2002).
J. Hu, T. W. Odom and C. M. Lieber, "Chemistry and Physics in One Dimension: Synthesis and Properties of Nanowires and Nanotubes", Accounts Chem. Res. 32(5), 435 (1999).
X. Batlle and A. Labarta, "Finite-Size Effects in Fine Particles: Magnetic and Transport Properties", J. Phys. D: Appl. Phys., 35(6), R15 (2002).
K. Bussmann, G. A. Prinz, S. F. Cheng and D. Wang, "Switching of Vertical Giant Magnetoresistance Devices by Current through the Device", Appl. Phys. Lett., 75, 2476 (1999).
S. Tsunekawa, S. Ito, T. Mori, K. Ishikawa, Z. Q. Li and Y. Kawazoe," Critical Size and Anomalous Lattice Expansion in Nanocrystalline $BaTiO_3$ Particles", Phys. Rev. B, 67, 019901 (2003).
L. V. Lutsev, A. I. Stognij and N. N. Novitskii, "Giant Magnetoresistance in Semiconductor/Granular Film Heterostructures with Cobalt Nanoparticles", Phys. Rev. B, 80, 184423 (2009).
H. T. Vo and F. G. Shi, "Towards Model-Based Engineering of Optoelectronic Packaging Materials: Dielectric Constant Modeling", Microelectron. J., 33, 409 (2002).
S. C. Gong, H. S. Lim, I. S. Shin, H. H. Park, H. T. Jeon, Y. C. Chang and H. J. Chang, "A Study of Soluble Pentacene Thin Film for Organic Thin Film Transistor", J. Microelectron. Packag. Soc., 14(3), 1 (2007).
D. K. Hwang, K. Lee, J. H. Kim, S. Im and C. S. Kim, "Low-Voltage High-Mobility Pentacene Thin-Film Transistors with Polymer/High-k Oxide Double Gate Dielectrics", Appl. Phys. Lett., 88(24), 243513 (2006).
H. Y. Lee, P. S. Chen, T. Y. Wu, Y. S. Chen, C. C. Wang, P. J. Tzeng, C. H. Lin, F. Chen, C. H. Lien and M. J. Tsai, "Low Power and High Speed Bipolar Switching with A Thin Reactive Ti Buffer Layer in Robust $HfO_2$ Based RRAM", IEDM 2008, 297, IEEE international (2008).
D. E. Kwon, M. H.Azarian and M. Pecht, "Failure Prediction of Multilayer Ceramic Capacitors (MLCCs) under Temperature-Humidity-Bias Testing Conditions Using Non-Linear Modeling", J. Microelectron. Packag. Soc., 20(3), 7 (2013).
A. Feteira, D. C. Sinclair, I. M. Reaney, Y. Somiya and M. T. Lanagan, " $BaTiO_3$ -Based Ceramics for Tunable Microwave Applications", J. Am. Ceram. Soc., 87(6), 1082 (2004).
J. A. Davies and A. Dutremez, "Electroceramics from Source Materials via Molecular Intermediates: $BaTiO_3$ from $TiO_2$ $[Ti(catecholate)_3]^{2-}$ ", J. Am. Ceram. Soc., 73, 1429 (1990).
S. Bhattacharhee, M. K. Paria and S. H. Maiti, "Occurrence of Excess Titania in Strontium Titanate Prepared by the Oxalate Precipitation Route", Ceram. Int., 18, 295 (1992).
T. Yoko, K. Kamiya and K. Tanaka, "Preparation of Multiple Oxide $BaTiO_3$ Fibers by Sol-Gel Method", J. Mater. Sci., 25, 3922 (1990).
H. B. Shrama and A. Mansingh, "Sol-Gel Processed Barium Titanate Ceramics and Thin Films", J. Mater. Sci., 33, 4455 (1998).
D. Hennings and S. Schreinemacher, "Characterization of Hydrothermal Barium Titanate", J. Eur. Ceram. Soc., 9, 41 (1992).
E. Ciftci, M. N. Rahanman and M. Shumsky, "Hydrothermal Precipitation and Characterization of Nanocrystalline $BaTiO_3$ Particles", J. Mater. Sci., 36, 4975 (2001).
I. J. Clark, T. Takeuchi, N. Ohtori and D. C. Sinclair, "Hydrothermal Synthesis and Characterization of $BaTiO_3$ Fine Powders: Precursors, Polymorphism and Properties", J. Mater. Chem., 9, 83 (1999).
D. H. Mun and J. S. Ha, "The Effect of Precursor Concentration on ZnO Nanorod Grown by Low-Temperature Aqueous Solution Method", J. Microelectron. Packag. Soc., 20(1), 33 (2013).
T. S. Her, E. Matijevic and M. C. Chon, "Controlled Double-Jet Precipitation of Uniform Colloidal Crystalline Sr- and Zrdoped Barium Titanates", J. Mater. Res., 11, 1321 (1996).
P. Gherardi and E. matijevic, "Homogeneous Precipitation of Spherical Colloidal Barium Titanate Particles", Colloids Surf., 32, 257 (1988).
M. K. Corbierre, N. S. Cameron, M. Sutton, K. Laaziri and R. B. Lennox, "Gold Nanoparticle/Polymer Nanocomposites: Dispersion of Nanoparticles as a Function of Capping Agent Molecular Weight and Grafting Density", Langmuir, 21(13), 6063 (2005).
B. G. Trewyn, I. I. slowing, S. Girl, H. T. Chen and V. S. Y. Lin, "Synthesis and Functionalization of a Mesoporous Silica Nanoparticle Based on the Sol-Gel Process and Applications in Controlled Release", Acc. Chem. Res., 40(9), 846 (2007).
C. Huang, H. Bai, Y. Huang, S. Liu, S. Yen and Y. Tseng, "Synthesis of Neutral/Hydrosol and Its Application as Antireflective Self-Cleaning Thin Film", Int. J. Photoenergy, 2012, 620764 (2012).
T. Tanaka, Y. Ebina, K. Takada, K. Kurashima and T. Sasaki, "Oversized Titania Nanosheet Crystallites Derived from Flux-Grown Layered Titanate Single Crystals", Chem. Mater., 15(18), 3564 (2003).
U. K. H. Bangi, W. Han, B. Yoo and H. H. Park, "Effects of Successive Additions of Two Capping Ligands on the Structural Properties of PbO Nanoparticles", J. Nanopart. Res., 15(11), 2070 (2013).
S. J. Chang, W. S. Liao, C. J. Ciou, J. T. Lee and C. C. Li, "An Efficient Approach to Derive Hydroxyl Groups on the Surface of Barium Titanate Nanoparticles to Improve Its Chemical Modification Ability", J. Colloid Interface Sci., 329(2), 300 (2009).
H. Xu, L. Gao and J. Guo, "Preparation and Characterizations of Tetragonal Barium Titanate Powders by Hydrothermal Method", J. Eur. Ceram. Soc., 22(7), 1163 (2002).
D. Tao and F. Wei, "New Procedure towards Size-Homogeneous and Well-Dispersed Nickel Oxide Nanoparticles of 30 nm", Mater. Lett., 58(25), 3226 (2004).
B. L. Newalkar, S. Komarneni and H. Katsuki, "Microwave-Hydrothermal Synthesis and Characterization of Barium Titanate Powders", Mater. Res. Bul., 36(13), 2347 (2001).
K. Nogi, M. Naito and T. Yokoyama, Nanoparticle Technology Handbook, 2nd Ed., pp.84-87, Elsevier (2012).
J. L. Shi, "Relation between Coarsening and Densification in Solid-State Sintering of Ceramics: Experimental Test on Superfine Zirconia Powder Compacts", J. Mater. Res., 14(4), 1389 (1999).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.