최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국유화학회지 = Journal of oil & applied science, v.32 no.2, 2015년, pp.320 - 325
Jeong, Hyeon-Taek (Department of Chemical Engineering, Daejin University) , Kim, Yong-Ryeol (Department of Chemical Engineering, Daejin University)
Flow mark is a sort of surface defect on the composite that can arise during the filling stage of the injection molding process. The purpose of this study is to clarify a mechanism of the flow mark which appears on the surface of injection molded Polypropylene (PP) through the characterization of th...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
S. Y. Kang, S. M. Kim, and W.U. Lee, "Finite element analysis for wavelike flow marks in injection molding", Polym. Eng. Sci, 47, 922 (2007).
L. Tredoux, I. Satoh, and Y. Kurosaki, "Investigation of wavelike flow marks in injection molding: A new hypothesis for the generation mechanism", Polym. Eng. Sci, 40, 2161 (2000).
M. C. Heuzey, J. M. Dealy, and D.M. Gao, "The Occurrence of Flow Marks during Injection Molding of Linear Polyethylene", Intern Polymer processing, XII, 403 (1997).
B. Patham, P. Papworth, K. Jayaraman, C. Shu and M. D. Wolkowicz, "Flow marks in injection molding of polypropylene and ethylene-propylene elastomer blends: Analysis of morphology and rheology", J. of Appl. Poly. Sci., 96, 423 (2005).
L. Tredoux, I. Satoh, and Y. Kurosaki, "Investigation of wave-like flow marks in injection molding: Flow visualization and micro-geometry", Polym. Eng. Sci, 39, 2233 (1999).
A. C. B. Bogaerds, M. A. Hulsen, G. W. M. Peters, and F. P. T. Baiijens, "Stability analysis of injection molding flows", J. Rheol, 48, 765 (2004).
M. Yoshii, H. Kuramoto, and K. Kato, "Experimental study of transcription of smooth surfaces in injection molding", Polym. Eng. Sci, 33, 1251 (1993).
B. Patham, P. Papworth, K. Jayaraman, C. Shu, and M. D. Wolkowicz, "Flow marks in injection molding of polypropylene and ethylene-propylene elastomer blends: Analysis of morphology and rheology", J. Appl. Polym. Sci, 96, 423 (2005).
S. A. Edwards and N. R. Choudhary, "Variations in surface gloss on rubber-modified thermoplastics: Relation to morphological and rheological behavior", Polym Eng Sci, 44, 96 (2004).
S. A. Edwards, N. Roy Choudhury and M. Provatas, "Visualization of surface and subsurface morphology: The effect of processing on a rubber-modified thermoplastic", J. Appl. Polym. Sci., 87, 774 (2003).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.