최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기설비공학논문집 = Korean journal of air-conditioning and refrigeration engineering, v.27 no.7, 2015년, pp.362 - 368
조홍현 (조선대학교 기계공학과) , 박차식 (호서대학교 기계공학부)
This paper presents a numerical study on the performance of a vapor compression cycle equipped with an ejector as an expansion device to improve the COP by reducing the expansion loss and compressor work. The simulation is carried out using a model based on the conservation of mass, energy and momen...
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
이젝터가 시스템의 성능을 향상시키는 원리는 무엇인가? | 이젝터(ejector) 는 고압의 구동유체(motive nozzle)를 분사시켜 이차유체 (secondary fluid)와 운동량 교환을 하여 저압의 유체를 높은 압력으로 수송하는 장치이다. 이젝터는 기존의 팽창장치인 모세관이나 오리피스에서 발생하는 감압팽창 과정의 추력손실(expansion loss)을 압력에너지로 회수 하여 압축기 입구에서의 압력을 상승시키고, 결과적으로 압축기의 소요동력을 감소시킴으로서 시스템의 성능을 향상시키게 된다. | |
이젝터는 무엇인가? | 냉동사이클의 성능향상을 위한 하나의 방안으로 이젝터 사이클에 대한 연구가 진행되고 있다. 이젝터(ejector) 는 고압의 구동유체(motive nozzle)를 분사시켜 이차유체 (secondary fluid)와 운동량 교환을 하여 저압의 유체를 높은 압력으로 수송하는 장치이다. 이젝터는 기존의 팽창장치인 모세관이나 오리피스에서 발생하는 감압팽창 과정의 추력손실(expansion loss)을 압력에너지로 회수 하여 압축기 입구에서의 압력을 상승시키고, 결과적으로 압축기의 소요동력을 감소시킴으로서 시스템의 성능을 향상시키게 된다. | |
이젝터 사이클이 냉동사이클의 성능 향상시킬 수 있는 이유는 무엇인가? | 이젝터(ejector) 는 고압의 구동유체(motive nozzle)를 분사시켜 이차유체 (secondary fluid)와 운동량 교환을 하여 저압의 유체를 높은 압력으로 수송하는 장치이다. 이젝터는 기존의 팽창장치인 모세관이나 오리피스에서 발생하는 감압팽창 과정의 추력손실(expansion loss)을 압력에너지로 회수 하여 압축기 입구에서의 압력을 상승시키고, 결과적으로 압축기의 소요동력을 감소시킴으로서 시스템의 성능을 향상시키게 된다. |
Kornhuser, A., 1990, The use of an ejector as a refrigerant expander, In : International refrigeration and air condtioning conference, Paper, 82.
Yari, M, 2008, Exergetic analysis of the vapour compression refrigeration cycle using ejector as an expander, Internatonal Journal of Exergy, Vol. 5, pp. 326-340.
Nehdi, E., Kairouani, L., and Bouzaina, M., 2007, Performance analysis of the vapor compression cycle using ejector as an expander, International journal of energy research, Vol. 31, pp. 364-375.
Bilir, N. and Kurasd Ersory, H., 2009, Peformance improvement of the vapour compression refrigeration cycle by a tow-phase constant area ejector, International journal of energy research, Vol. 33, pp. 469-480.
Sarkar, J., 2010, Geometric parameter optimization of ejector-expansion refrigeration cycle with natural refrigerants, International Journal of Energy Research, Vol. 20, pp. 871-885.
Hu, J., Shi, J., Liang, Y., Yang, Z., and Chen, J., 2014, Numerical and experimental investigation on nozzle parameters for R410A ejector air conditioning system, International Journal of Refrigeration, Vol. 40, pp. 338-346.
Wongwise, S. and Disawas, S., 2005, Experimental investigation of the performance of the refrigeration cycle using a two-phase ejector as an expansion device, International Journal of Refrigeration, Vol. 27, No. 6, pp. 587-594.
Li, D. and Groll, A., 2005, Transcritical $CO_2$ refrigeration cycle with ejector-expansion device, International Journal of Refrigeration, Vol. 28, No.5, pp. 766-773.
Lee, J. S., Kim, M. S., and Kim, M. S., 2011, Experimental study on the improvement of $CO_2$ air conditioning system performance using an ejector, International Journal of Refrigeration, Vol. 34, No. 7, pp. 1614-1625.
Koban, M., 2009, HFO-1234yf low GWP refrigerant LCCP analysis, Proceedings of SAE world congress, Detroit, USA.
Cho, H. H., Lee, H. S., and Park, C. S., 2012, Study on the performance improvement for an automobile air conditioning system using alternative refrigerant R1234yf, Korea Journal of Air-Conditioning and Refrigeration Engineering, Vol. 25, No. 4, pp. 201-207.
Sun, D. W. and Eames, I. W., 1996, Performance characteristics of HCFC-123 ejector refrigeration cycles, International Journal of Energy Research, Vol. 20, pp. 871-885.
Sun, D. W. and Eames, I. W., 1996, Variable geometry ejectors and their applications in ejector refrigeration systems, Energy, Vol. 21, pp. 919-929.
Li, H., Cao, F., Bu, X., Wang, L., and Wang., X., 2014, Performance characteristics of R1234yf ejectorexpansion refrigeration cycle.
Chen, L. T., 1988, A new ejector-absorber cycle to improve the COP of an absorption refrigeration system, Applied energy, Vol. 30, pp. 37-51.
Yapici, R. and Ersoy, H. K., 2005, Performance characteristics of the ejector refrigeration system based on the constant area ejector flow model, Energy conversion and management, Vol. 46, pp. 3117-3135.
Jianlin, Y., Hua, C., Yunfeng, R., and Yanzhong, L., 2006, A new ejector refrigeration system with an additional jet pump, Applied Thermal Engineering, Vol. 26, pp. 312-319.
Brunin, O., Feidt, M., and Hivet, B., 1997, Comparison of the working domains of some compression heat pumps and compression-absorption heat pump, International Journal of Refrigeration, Vol. 20, No.5, pp. 308-318.
Engieering Equation Solver Ver. 9.698, F-Chart software, 2014.
Li, H., Cao, F., Wang, L., and Wang, X., 2014, Performance characteristics of R1234yf ejector-expansion refrigeration cycle, Applied energy, Vol. 121, pp. 96-103.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.