최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기윤활학회지 = Journal of the Korean Society of Tribologists and Lubrication Engineers, v.31 no.2, 2015년, pp.62 - 68
장붕 (인하대학교 기계공학과) , 이광희 (인하대학교 기계공학과) , 이철희 (인하대학교 기계공학과) , 최종명 (인하대학교 전자공학과)
A magnetorheological (MR) fluid is a smart material whose rheological behavior can be controlled by varying the parameters of the applied magnetic field. Because the damping force and shear force of an MR fluid can be controlled using a magnetic field, it is widely employed in many industrial applic...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Qiu, H. Z., Yan, H., Zhang, P., et al., Friction Properties of Carbonyl Iron-based magnetorheological fluid [J]. Tribology, Vol. 29, pp. 61-67, 2009.
Bossisa, G., Lacisb, S., Meuniera, A., et al., Magnetorheological fluids [J]. Journal of Magnetism and Magnetic Materials, Vol. 252, pp. 224-228, 2002.
Furst, E. M., Gast, A. P. Micromechanics of Magnetorheological Suspensions [J]. Physical Review E., Vol. 61, pp. 6732-6739, 2000.
Huang, J., Zhang, J. P., Yang, Y., et al., Analysis and Design of Cylindrical Magneto-Rheological Fluid Brake [J]. Journal of Materials Processing Technology, Vol. 129, pp. 559-562, 2002.
Podgomik, B., Jacobson, S., Hogmark, S. DLC coating of boundary lubricated components-advantages of coating one of the contact surfaces rather than both or none [J]. Tribology International, Vol. 36, pp.843-849, 2003.
Jia, Z. F., Xia, Y. Q., Li, J. L., et al., Friction and wear behavior of diamond-like carbon coating on plasmanitrided mild steel under boundary lubrication [J]. Tribology International, Vol. 43, pp. 474-482, 2010.
Seok, J. W., Lee, S. O., Jang, K. I., et al., Tribological properties of a Magnetorheological (MR) fluid in a finishing process [J]. Tribology Transactions, Vol. 52, pp. 460-469, 2009.
Song, W. L., Choi, S. B., Choi, J. Y., et al., Wear and friction characteristics of magnetorheological fluid under magnetic field activation [J]. Tribology Transactions, Vol. 54, pp. 616-624, 2011.
Hu, Z. D., Yan, H., Qiu, H. Z., et al., Friction and wear of magnetorheological fluid under magnetic field [J]. Wear, pp. 278-279, pp. 48-52, 2012.
Stanford, M. K., Jain, V. K., Friction and wear characteristics of hard coatings [J]. Wear, Vol. 251, pp. 990-996, 2001.
Holmberg, K., Ronkainen, H., Matthews, A., Tribology of thin coatings [J]. Ceramics International, Vol. 26, pp. 787-795, 2000.
Kenneth H, Helena R, Anssi LK, et al. Friction and wear of coated surfaces-scales, modeling and simulation of tribomechanisms [J]. Surface coatings technology. 202: 1034-1049, 2007.
Pettersson, U., Jacobson, S., Friction and wear properties of micro textured DLC coated surface in bound arylubricated sliding [J]. Tribology Letter, Vol. 17, pp. 553-559, 2004.
Ouyang, J. H., Sasaki, S., Friction and wear characteristics of a Ti-containing diamond-like carbon coating with an SRV tester at high contact load and elevated temperature [J]. Surface & Coating Technology, Vol. 195, pp. 234-244, 2005.
Friderich, K., Karger, K. J., Lu, Z. Effects of steel counterface roughness and temperature on the friction and wear of PE(E)K composites under dry sliding conditions [J]. Wear, Vol. l48, No. 2, pp. 235-247, 1991.
Zhang, P., Lee, K. H., Lee, C. H., Reciprocating friction characteristics of magneto-rheological fluid for aluminum under magnetic field [J]. Trans. Nonferrous Met. Soc. China, Vol. 24, No. 1, pp. 171-176, 2014.
Basavaraju, M., Ranganatha, S., Effect of soft material hardness and hard material surface morphology on friction and transfer layer formation; dry condition. International journal of recent technology and engineering, Vol. 2, pp. 40-46, 2013.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.