최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Composites research = 복합재료, v.28 no.4, 2015년, pp.143 - 147
이정률 (Department of Aerospace Engineering, Korea Advanced Institute of Science and Technology) , 정효미 (Department of Aerospace Engineering and the Engineering Institute-Korea, Chonbuk National University) , 트루옹 탄 충 (Department of Aerospace Engineering, Korea Advanced Institute of Science and Technology) , 신혜진 (Department of Aerospace Engineering and the Engineering Institute-Korea, Chonbuk National University) , 박재윤 (Department of Aerospace Engineering, Korea Advanced Institute of Science and Technology)
This paper proposes laser ultrasonic technique for the impact damage inspection of hydrogen fuel tank and proves that the impact damage can be visualized using an ultrasonic wave propagation imager with an easy detachable sensor head as an impact damage inspection tool for hydrogen fuel tanks. Also ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
수소의 장점은 무엇인가? | 수소는 기존 가솔린에 비해 3배에 가까운 에너지를 만들어 낼 수 있다. 또한 무한정 얻을 수 있는 친환경 에너지라는 점에서 기존의 화석 연료를 대체할 수 있는 에너지원으로 각광받고 있다[1]. 하지만 자동차 연료로 사용하기 위해서는 기체인 수소를 충분히 저장시킬 수 있는 방법이 필요하기 때문에 저장 방식에 관련된 연구가 활발히 진행되고 있다. | |
수소 연료를 저장하는 방식에는 어떤 방식이 있는가? | 수소 연료를 저장하는 방식에는 액화 방식, 수소 저장 합금 방식, 고압으로 압축하여 저장하는 방식이 있다. 액화 방식의 경우, 수소를 액화시키기 위해 많은 에너지가 필요하다는 단점이 있다. | |
수소 연료를 저장하는 방식 중 액화 방식의 단점은 무엇인가? | 수소 연료를 저장하는 방식에는 액화 방식, 수소 저장 합금 방식, 고압으로 압축하여 저장하는 방식이 있다. 액화 방식의 경우, 수소를 액화시키기 위해 많은 에너지가 필요하다는 단점이 있다. 수소 저장 합금 방식의 경우 수소가 결합할 수 있는 합금을 제작하여 수소를 저장하는 방식이다. |
Kim, M.S., Age of Hydrogen Technology Innovation, Salim Pub. Co., Republic of Korea, 2005
Han, W.H., Choi, J.S., and Choi, J.H., "Trends of Hydrogen Energy Technology Development and Application to Ship," Journal of the Korean Society of Marine Environment & Safety, Vol. 16, No. 3, 2010, pp. 313-320.
Lee, K.M., Park, J.S., Lee, H.G., and Kim, Y.S., "A Study on Analysis Method to Evaluate Influence of Damage on Composite Layer in Type3 Composite Cylinder," Composites Research, Vol. 23, No. 6, 2010, pp. 7-13.
Lee, J.R., Chia, C.C., Park, C.Y., and Jeong, H.M., "Laser Ultrasonic Anomalous Wave Propagation Imaging Method with Adjacent Wave Subtraction: Algorithm," Optics & Laser Technology, Vol. 44, No. 5, 2012, pp. 1507-1515.
Lee, J.R., Chia, C.C., Shin, H.J., Park, C.Y., and Yoon, D.J., "Laser Ultrasonic Propagation Imaging Method in the Frequency Domain based on Wavelet Transformation," Optics and Laser in Engineering, Vol. 49, No. 1, 2010, pp. 167-175.
Lee, J.R., Chong, S.Y., Jeong, H.M., and Kong, C.W., "A Time-of-flight Mapping Method for Laser Ultrasound Guided in a Pipe and its Application to Wall-thinning Visualization," NDT&E International, Vol. 44, No. 1, 2011, pp. 680-691.
Lee, J.R., Cho, C.M., Park, C.Y., Truong, T.C., Shin, H.J., Jeong, H.M., and Flynn, E.B., "Spar Disbond Visualization in In-service Composite UAV with Ultrasonic Propagation Imager," Aerospace Science and Technology, Vol. 45, 2015, pp. 180-185.
Chia, C.C., Lee, J.R., Park, C.Y., and Jeong, H.M., "Laser Ultrasonic Anomalous Wave Propagation Imaging Method with Adjacent Wave Subtraction: Application to Actual Damages in Composite Wing," Optics & Laser Technology, Vol. 44, 2012, pp. 428-440.
Lee, J.R., Chia, C.C., Park, C.Y., and Jeong, H.M., "Laser Ultrasonic Anomalous Wave Propagation Imaging Method with Adjacent Wave Subtraction: Algorithm," Optics & Laser Technology, Vol. 44, 2012, pp. 1507-1515.
Chia, C.C., Jeong, H.M., Lee, J.R., and Park, G., "Composite Aircraft Debonding Visualization by Laser Ultrasonic Scanning Excitation and Integrated Piezoelectric Sensing," Structural Control & Health Monitoring, Vol. 19, 2012, pp. 605-620.
Lee, J.R., Shin, H.J., Chia C.C., Dhital, D., Yoon, D.J., and Huh, Y.H., "Long Distance Laser Ultrasonic Propagation Imaging System for Damage Visualization," Opitcs and Lasers in Engineering, Vol. 49, 2011, pp. 1361-1371.
Jeong, H.M. and Lee, J.R., "Investigation of Mobile Ultrasonic Propagation Imager as a Tool for Composite Wind Blade Quality Control", Composite Structures, Vol. 133, 2015, pp. 39-45.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.