최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국건축시공학회지 = Journal of the Korea Institute of Building Construction, v.15 no.5, 2015년, pp.465 - 471
김원우 (Department of Architectural Engineering, Kyeonggi University) , 양근혁 (Department of Plant.Architectural Engineering, Kyeonggi University)
This study proposed V-shaped tie bar method as an alternative of internal cross-tie for reinforced concrete columns in order to enhance the constructability and confinement effectiveness of the lateral tie bars. A total of 35 pull-out specimens were prepared with the parameters of concrete compressi...
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
철근콘크리트 기둥의 연성에 영향을 주는 요소는? | 일반적으로 철근콘크리트 기둥의 연성은 횡보강근에 의해 제공되는 구속력에 의해 중요한 영향을 받는다. KCI 2012[1] 및 ACI 318-11[2]에서 제시하고 있는 철근콘크리트의 기둥에 대한 내진설계는 횡보강근으로서 외부 띠철근과 함께 콘크리트 코어를 관통하는 내부 크로스타이의 배근양과 간격을 규정하고 있다. | |
KCI에서 제시하고 있는 철근콘크리트의 기둥에 대한 내진설계를 설명하시오 | 일반적으로 철근콘크리트 기둥의 연성은 횡보강근에 의해 제공되는 구속력에 의해 중요한 영향을 받는다. KCI 2012[1] 및 ACI 318-11[2]에서 제시하고 있는 철근콘크리트의 기둥에 대한 내진설계는 횡보강근으로서 외부 띠철근과 함께 콘크리트 코어를 관통하는 내부 크로스타이의 배근양과 간격을 규정하고 있다. 코어내부의 크로스타이는 횡보강근의 수직간격과 동일하게 배근되는데 시공성을 고려하여 한쪽단이 90゚ 후크로, 타단이 135゚ 후크로 배근되도록 규정되고 있다. | |
V형 띠철근의 장점은 무엇인가? | 기둥의 내부 크로스타이를 대체하기 위한 V형 띠철근 배근방법은 이형철근을 대칭으로 절곡하여 가공된 형태로 원터치형 클립을 이용해 주철근에 고정시키는 방법이다(Figure 1). 이러한 형태의 띠철근은 가공공정이 용이하며 배근 시에도 기둥 내부를 가로지르지 않기 때문에 시공성이 현저히 증가한다. 또한 접합부의 철근 과밀도 방지 할 수 있다. 특히 기둥의 대 변형에서도 내부 크로스타이처럼 훅크의 풀림현상을 방지할 수 있어 주철근의 좌굴 및 콘크리트 코어의 구속력 제공에 매우 효율적일 수 있다. 하지만 V형 띠철근의 구속력은 절곡각도 및 묻힘길이에 의해 중요한 영향을 받기 때문에 이에 대한 기초연구가 필요하다. |
Korea Concrete Institute. Concrete Design Code and Commentary. Kimoondang Publishing Company. 2012.
American Concrete Institute. Building Code Requirements for Structural Concrete and Commentary. ACI 318-11. 2011.
Lee YH. An Experimental Study on the Strength and Ductility of High-Strength Concrete Columns Confined by Lateral Ties Under Axial Loads [dissertation]. Seoul: Chung-Ang University; 2001. 143 p.
Korea Concrete Institute. Standard Specification for Concrete. Kimoondang Publishing Company. 2009.
Chun SC, Kim DY. Design Considerations and Pull-Out Behavior of Mechanical Anchor of Reinforcement. Journal of the Korea Concrete Institute. 2001 Dec;13(6):593-601.
Han BS, Kim JK, Shin SW. Evaluation of Confinement Effect of High Strength Concrete Confined with Transverse Ties in Reinforced Concrete Columns. Journal of Architectural Institute of Korea. 2008 Mar;24(3):3-10.
Comite Euro-International Du Beton. Ceb-fip Model Code 1990. Thomas Telforld. 1991. 437 p.
Kim BJ, Jin IG, Choi HB, Kang KI. The Effect of Form Oils on Bond Characteristics of Reinforced Concrete Members. Journal of Architectural Institute of Korea. 2007 Dec;23(12):89-96.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.