최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국유체기계학회 논문집 = The KSFM journal of fluid machinery, v.18 no.5, 2015년, pp.13 - 18
김철규 (한양대학교 대학원 기계공학과) , 윤준용 (한양대학교 공학대학 기계공학과)
This study has been performed to evaluate the safety of the retainer-type ball valve for a high-pressure pipeline to a district heating plant. The retainer-type ball valve is an improved design for conventional ball valves, such as the floating ball valve and the trunnion ball valve. Numerical analy...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
볼밸브가 가지는 단점은 무엇인가? | 따라서 볼밸브는 범용 밸브 중에서, 특히 고압의 상온 유체를 차단, 제어하는데 매우 양호한 제어 특성을 가지고 있다. 볼밸브는 타 종류의 밸브에 비해 간단한 구조 및 보수의 용이성 등 장점을 가지고 있지만, 시트구조의 정밀도와 치밀성, 시트재료의 제한과 같은 단점도 가지고 있다. | |
플로팅형 볼밸브는 어떻게 사용되는가? | 플로팅형 볼밸브는 트러니언형보다 구조가 간단하고, 저압 및 중/소형 밸브에 적합하다. 그리고 가격이 저렴하기 때문에 범용으로 널리 사용되고 있다. 트러니언형 볼밸브는 축으로 볼의 자중을 지지하기 때문에 고압 및 대형 밸브에 적합하다. | |
볼밸브의 특징은 무엇인가? | 볼밸브는 90도 회전하는 밸브로써 매우 양호한 기밀유지 특성을 가지고 있다. 또한 볼의 유로 단면 형상이 원형으로 밸브의 입/출구의 형상과 같은 모양을 갖고 있기 때문에 유로 저항이 매우 적다. 따라서 볼밸브는 범용 밸브 중에서, 특히 고압의 상온 유체를 차단, 제어하는데 매우 양호한 제어 특성을 가지고 있다. 볼밸브는 타 종류의 밸브에 비해 간단한 구조 및 보수의 용이성 등 장점을 가지고 있지만, 시트구조의 정밀도와 치밀성, 시트재료의 제한과 같은 단점도 가지고 있다. |
Kim, D. S., Bea, S. K., Lee, W. H. and Kim, H. S., 2006, "Thermal Stress and Flow Analysis of a Cryogenic Ball Valve," Journal of Drive and Control, Vol. 3, No. 4, pp. 8-13.
Moujaes, S. F. and Jagan, R., 2008, "3D CFD Predicteions and Experimental Comparisons of Pressure Drop in a Ball Valve at Different Partial Openings in Turbulent Flow," Journal of Energy Engineering-ASCE, Vol. 134, No. 1, pp. 24-28.
Chern, M. J., Wang, C. C. and Ma, C. H., 2007, "Performance test and flow visualization of ball valve," Experimental Thermal and Fluid Science, Vol. 31, pp. 505-512.
Song, X. G., Kim, S. G., Baek, S. H. and Park, Y. C., 2009, "Structural optimization for ball valve made of CF8M stainless steel," Transactions of Nonferrous Metals Society of China, Vol. 19, pp. s258-s261.
Bagheriard, S., Pariente, I. F. and Guagliano, M., 2013, "Failure analysis of a large ball valve for pipe-lines," Egineering Failure Analysis, Vol. 32, pp. 167-177.
Rogula, J., 2012, "The Influence of Seat Fatigue Test on the Leakage in Ball Valve," Procedia Engineering, Vol. 39, pp. 91-97.
Shin, M. S., Yoon, J. Y., Park, I. W., Lee, S. H., Park, H. Y. and Jung, S. H., 2010, "A Study on Structural Analysis of Butterfly Valve Components by Pressure Testing of the Industrial Standard," The KSFM Journal of Fluid Machinery, Vol. 14, No. 3, pp. 5-9.
ISO 5208, 2008, "Industrial valves-Pressure testing of metallic valves," International Organization for Standardization, Geneva, Switzerland.
IEC 60534-4, 2006, "Industrial-process control valves, Part 4: Inspection and routine testing," International Electrotechnical Commission, Geneva, Switzerland.
KS B 2304, 2001, "General rules for inspection of valves," Korean Standard Association.
ANSYS User's Manual version 14.0, ANSYS Inc., USA.
SolidWorks 2012 User's Manual, Dassault systems solidworks corporation., USA.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.