$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

Fabrication of YSZ-based Micro Tubular SOFC Single Cell using Electrophoretic Deposition Process 원문보기

한국세라믹학회지 = Journal of the Korean Ceramic Society, v.52 no.5, 2015년, pp.315 - 319  

Yu, Seung-Min (Division of Advanced Materials Engineering, Chonbuk National University) ,  Lee, Ki-Tae (Division of Advanced Materials Engineering, Chonbuk National University)

Abstract AI-Helper 아이콘AI-Helper

Yttria-stabilized zirconia (YSZ)-based micro tubular SOFC single cells were fabricated by electrophoretic deposition (EPD) process. Stable slurries for the EPD process were prepared by adding phosphate ester (PE) as a dispersant in order to control the pH, conductivity, and zeta-potential. NiO-YSZ a...

주제어

AI 본문요약
AI-Helper 아이콘 AI-Helper

* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.

제안 방법

  • In this study, YSZ-based anode supported micro tubular SOFC single cells were fabricated using the EPD process. Various processing conditions, such as amount of charging agent, applied voltage, and deposition time, were investigated.

대상 데이터

  • Stable slurries for the anode support layer, anode functional layer (AFL), and electrolyte layer were prepared with various compositions by ball-milling. The slurry of NiO-YSZ for the anode support layer (Ni:YSZ= 60:40 vol%) was prepared by mixing NiO (FP, Sumitomo) and YSZ (TZ-8YS, Tosoh) powders with 30 vol% of PMMA (SUNPMMA-S100, Sunjin Chemical) as a pore former in anhydrous ethanol(Aldrich). Phosphate ester (PE, Ethyl acid phosphate, Johoku Chem.
본문요약 정보가 도움이 되었나요?

참고문헌 (12)

  1. N.Q. Minh, "Ceramic Fuel Cells," J. Am. Ceram. Soc., 76 [3] 563-88 (1993). 

  2. S.C. Singhal, "Advances in Solid Oxide Fuel Cell Technology," Solid State Ionics, 135 [1-4] 305-13 (2000). 

  3. T. Talebi, B. Raissi, M. Haji, and A. Maghsoudipour, "The Role of Electrical Conductivity of Substrate on the YSZ Film Formed by EPD for Solid Oxide Fuel Cell Applications," Int. J. Hydrogen Energy, 35 [17] 9405-10 (2010). 

  4. S. M. Majhi, S. K. Behura, S. Bhattacharjee, B. P. Singh, T. K. Chongdar, N. M. Gokhale, and L. Besra, "Anode Supported Solid Oxide Fuel Cells (SOFC) by Electrophoretic Deposition," Int. J. Hydrogen Energy, 36 [22] 14930-35 (2011). 

  5. M. H. Chol, J. H. Chol, T. H. Lee, and Y. S. Yoo, "Effect of Microstructure on Mechanical and Electrical Properties in Ni-YSZ of Anode Supported SOFC," Trans. Kor. Hydrogen New Energy Soc., 22 [5] 592-98 (2011). 

  6. H. J. Cho and G. M. Choi, "Fabrication and Characterization of Ni-supported Solid Oxide Fuel Cell," Solid State Ionics, 180 [11-13] 792-95 (2009). 

  7. L. Besra, S. Zha, and M. Liu, "Preparation of NiO-YSZ/YSZ Bi-layers for Solid Oxide Fuel Cells by Electrophoretic Deposition," J. Power Sources, 160 [1] 207-14 (2006). 

  8. S. W. Kim, B. H. Lee, Y. B. Son, and H. S. Song, "Preparation of Electrolyte Thin Film on NiO-YSZ Porous Substrate for Solid Oxide Fuel Cells by Electrophoretic Deposition(I)," J. Korean Ceram. Soc., 36 [5] 521-30 (1999). 

  9. P. Sarkar, D. De, and H. Rho, "Synthesis and Microstructural Manipulation of Ceramics by Electrophoretic Deposition," J. Mater. Sci., 39 [3] 819-23 (2004). 

  10. R. N. Basu, C. A. Randall, and M. J. Mayo, "Fabrication of Dense Zirconia Electrolyte Films for Tubular Solid Oxide Fuel Cells by Electrophoretic Deposition," J. Am. Ceram. Soc., 84 [1] 33-40 (2001). 

  11. Y. C. Wang, I. C. Leu, and M. H. Hon, Kinetics of Electrophoretic Deposition for Nanocrystalline Zinc Oxide Coatings," J. Am. Ceram. Soc., 87 [1] 84-88 (2004). 

  12. S. Doungdaw, T. Uchikoshi, Y. Noguchi, C. Eamchotchawalit, Y. Sakka, "Electrophoretic Deposition of Lead Zirconate Titanate (PZT) Powder from Ethanol Suspension Prepared with Phosphate Ester," Sci. Tech. Adv. Mater., 6[8] 927-32 (2005). 

저자의 다른 논문 :

LOADING...

관련 콘텐츠

오픈액세스(OA) 유형

GOLD(Hybrid)

저자가 APC(Article Processing Charge)를 지불한 논문에 한하여 자유로운 이용이 가능한, hybrid 저널에 출판된 논문

이 논문과 함께 이용한 콘텐츠

저작권 관리 안내
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로