최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.32 no.12, 2015년, pp.1011 - 1016
이종수 (건국대학교 기계설계학과) , 이창우 (창원대학교 기계공학부)
In a roll-to-roll continuous system, winding is one of the most important processes since it determines the quality of the final manufactured products such as flexible film and printed electronic devices. Since an adequate winding tension can reduce the incidence of the defects that are derived from...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
와인딩 (winding) 공정은 어떤 공정인가? | 와인딩 (winding) 공정은 연속 인쇄 및 필름 생산 공정에 적용되는 롤투롤 (roll-to-roll) 시스템의 최종 단계로 생산된 제품을 롤 (roll) 형태로 보관하는 공정이다. 1-4 본 공정은 다량의 제품을 효율적으로 보관할 수 있다는 이점이 있으나 감김 롤 내부 응력 분포에 따라 제품 수율에 악영향을 미치는 스타링 (starring), 텔레스코핑 (telescoping) 과 같은 결함이 발생할 수 있다. | |
와인딩 (winding) 공정의 감김 롤 내부 응력 분포에 따라 어떤 결함이 발생하는가? | 와인딩 (winding) 공정은 연속 인쇄 및 필름 생산 공정에 적용되는 롤투롤 (roll-to-roll) 시스템의 최종 단계로 생산된 제품을 롤 (roll) 형태로 보관하는 공정이다. 1-4 본 공정은 다량의 제품을 효율적으로 보관할 수 있다는 이점이 있으나 감김 롤 내부 응력 분포에 따라 제품 수율에 악영향을 미치는 스타링 (starring), 텔레스코핑 (telescoping) 과 같은 결함이 발생할 수 있다. 5 이러한 결함 들은 와인딩에 따른 장력 거동을 개선시킴으로써 제거할 수 있으며 이에 따라 감김 장력 거동에 따른 롤 내부 응력 분포 모델 개발6-8 및 실험 기반 감김 장력 최적화에 대한 다양한 연구가 보고되어왔다. | |
파라볼릭 프로파일의 장점은 무엇인가? | 파라볼릭 프로파일은 최대 감김 반경을 고려하지 않고 반경 증가에 따라 와인딩 장력을 감소시키는 하이퍼볼릭 프로파일의 한계점을 개선한 모델로 하이퍼볼릭에 비해 더 가파르게 감소하며 최대 감김 반경이 작은 경우에도 설정된 테이퍼 값만큼 장력을 감소시킨다는 이점이 있다. 10 식 (1)-(3)은각 프로파일에 대한 수학적 모델이며, Fig. |
Kim, S. H., Hong, K., Xie, W., Lee, K. H., Zhang, S., et al., "ElectrolyteGated Transistors for Organic and Printed Electronics," Advanced Materials, Vol. 25, No. 13, pp. 1822-1846, 2013.
Lee, C., Kang, H., and Shin, K., "Advanced Taper Tension Method for the Performance Improvement of a Roll-to-Roll Printing Production Line with a Winding Process," International Journal of Mechanical Sciences, Vol. 59, No. 1, pp. 61-72, 2012.
Lee, J., Shin, K., and Lee, C., "Analysis of Dynamic Thermal Characteristic of Register of Roll-to-Roll Multi-Layer Printing Systems," Robotics and Computer-Integrated Manufacturing, Vol. 35, pp. 77-83, 2015.
Knittel, D., Laroche, E., Gigan, D., and Koc, H., "Tension Control for Winding Systems with Two- Degrees-of-Freedom $H{\infty}$ Controllers," IEEE Transactions on Industry Applications, Vol. 39, No. 1, pp. 113-120, 2003.
Lee, C., "A Study on the Taper Tension Control Considering Lateral Motion of a Moving Web in Roll to Roll Systems," Ph.D. Thesis, Mechanical Design and Production Engineering, Konkuk University, 2008.
Altmann, H. C., "Formulas for Computing the Stresses in Center-Wound Rolls," Tappi Journal, Vol. 51, No. 4, pp. 176-179, 1968.
Good, J. K., Pfeiffer, J. D., and Giachetto, R. M., "Losses in Wound-on-Tension in the Center Winding of Wound Rolls," Proc. of the Web Handling Symposium on ASME Applied Mechanics Division, Vol. 149, pp. 1-12, 1992.
Burns, S. J., Meehnan, R. R., and Lambropoulos, J. C., "Strain-Based Formulas for Stresses in Profiled Center-Wound Rolls," Tappi Jorunal, Vol. 82, No. 7, pp. 159-167, 1999.
Wan, F., Wang, Y. Q., Yan, X. C., and Cui, Y. G., "Correlation between Mandrel and Pinch Roll of Down-Coiler," Journal of Iron and Steel Research, Vol. 9, 2007.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.