최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기설비공학논문집 = Korean journal of air-conditioning and refrigeration engineering, v.27 no.10, 2015년, pp.497 - 505
유지호 (조선대학교 기계공학과 대학원) , 조홍현 (조선대학교 기계공학과)
The evaporating temperature range required for the low temperature freezing system is from
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
대형 냉동창고 또는 대형마켓과 같은 저온 냉동 시스템에서 냉동식품을 보관하기 위해 필요한 증발온도는? | 대형 냉동창고 또는 대형마켓과 같은 저온 냉동 시스템에서 냉동식품을 보관하기 위해 필요한 증발온도는 약 -50oC∼-30oC의 범위로 이를 단단 증기압축 사이클의 구성을 통하여 충분한 냉방용량을 확보하기 어렵다. 따라서 다단 증기압축식 냉동시스템 또는 캐스케이드(Cascade) 냉동시스템을 적용하여 시스템을 설계하는 것이 효과적이며, 이는 상온의 온도조건에서 작동되는 냉동시스템에서 필요한 저온의 증발온도를 얻을 수 있다. | |
대형 냉동창고 또는 대형마켓과 같은 저온 냉동 시스템의 한계는? | 대형 냉동창고 또는 대형마켓과 같은 저온 냉동 시스템에서 냉동식품을 보관하기 위해 필요한 증발온도는 약 -50oC∼-30oC의 범위로 이를 단단 증기압축 사이클의 구성을 통하여 충분한 냉방용량을 확보하기 어렵다. 따라서 다단 증기압축식 냉동시스템 또는 캐스케이드(Cascade) 냉동시스템을 적용하여 시스템을 설계하는 것이 효과적이며, 이는 상온의 온도조건에서 작동되는 냉동시스템에서 필요한 저온의 증발온도를 얻을 수 있다. | |
단일냉매를 사용하는 다단 증기압축식 냉동시스템의 장점은 무엇인가? | 대형 냉동창고 또는 대형마켓과 같은 저온 냉동 시스템에서 냉동식품을 보관하기 위해 필요한 증발온도는 약 -50oC∼-30oC의 범위로 이를 단단 증기압축 사이클의 구성을 통하여 충분한 냉방용량을 확보하기 어렵다. 따라서 다단 증기압축식 냉동시스템 또는 캐스케이드(Cascade) 냉동시스템을 적용하여 시스템을 설계하는 것이 효과적이며, 이는 상온의 온도조건에서 작동되는 냉동시스템에서 필요한 저온의 증발온도를 얻을 수 있다.그러나 단일냉매를 사용하는 다단 증기압축식 냉동시스템의 경우 낮은 저온의 증발온도에 도달하는데 한계가 있어 저온 냉동시스템은 개별적인 2개의 사이클로 구성되어 저단과 고단 사이클이 서로 열교환하는 캐스케이드 냉동시스템을 적용하는 것이 유리하다. |
Rezayan, O. and Behbahaninia, A., 2011, Thermoeconomic optimization and exergy analysis of $CO_2/NH_3$ cascade refrigeration systems, Energy, Vol. 36, pp. 888-895.
Lee, T. S., Liu C. H., and Chen T. W., 2006, Thermodynamic analysis of optimal condensing temperature of cascade-condenser in $CO_2/NH_3$ cascade refrigeration system, International Journal of Refrigeration, Vol. 29, pp. 1100-1108.
Bhattacharyya, S., Mukhopadhyay S., Kumar A., Khurana R. K., and Sarkar J., 2005, Optimization of a $CO_2-C_3H_8$ cascade system for refrigeration and heating, International Journal of Refrigeration, Vol. 28, pp. 1284-1292.
Dopazo, J. A. and Fernandez-Seara, J., 2011, Experimental evalation of a cascade refrigeration system prototype with $CO_2$ and $NH_3$ for freezing process application, International Journal of Refrigeration, Vol. 34, pp. 257-267.
Nicola, G. D., Polonara, F., Stryjek, R., and Arteconi, A., 2011, Performance of cascade cycles working with blends of $CO_2+$ natural refrigerants, International Journal of Refrigeration, Vol. 34, pp. 1436-1445.
Aminyavari, M., Najafi, B., Shirazi, A., and Rinaldi, F., 2014, Exergetic, economic and environmental (3E) analyses, and multiobjective optimization of a $CO_2/NH_3$ cascade refrigeration system, Applied Thermal Engineering, Vol. 65, pp. 42-50.
Getu, H. M. and Bansal, P. K., 2008, Thermodynamic analysis of an R744-R717 cascade refrigeration system, International Journal of Refrigeration, Vol. 31, pp. 45-54.
Yun, R. and Cho, Y., 2010, Evaluation of the performance for the $CO_2-NH_3$ cascade system and the two statge $CO_2$ systems, Proceedings of the SAREK 2010 Summer Annual Conference, 10-S-144.
Likitthammanit, M., 2007, Experimental investigation of $CO_2/NH_3$ cascade and transcritical $CO_2$ refrigeration systems in supermarkets, Master of Science Thesis, Stockholm, Sweden.
EES : Engineering Equation Solver, 2006. fChart Software Inc.
Gnielinski, V., 1976, New equations for heat and mass transfer in turbulent pipe and channel flow, International Chemical Engineering, Vol. 16, pp. 59-68.
Gungor, K. E. and Winterton R. H. S., 1986, A general correlation for flow boiling in tubes and annuli, International Journal of Heat and Mass Transfer, Vol. 29, pp. 351-358.
Churchill, S. W., 1977, Friction factor equation span all fluid flow regimes, Chemical Engineering, Vol. 7, pp. 91-92.
Duttus, P. W. and Boelter, L. M. K., 1930, University of California Publications on Engineering, Vol. 2, No. 13, pp. 443-461.
Cavallini, A. and Zecchin, R., 1974, A dimensionless correlation for heat transfer in forced convection condensation, Proc. 5th Int. Heat Transfer Conf, Vol. 3, pp. 309-313.
Baik, Y. J., Chang, Y. S., and Kim, Y. I., 2000, Measurement of single and condensation heat transfer coefficients of ammonia in a horizontal tube, SAREK, Vol. 12, No. 6, pp. 561-569.
Wang, C. C., Lee, W. S., and Shen, W. J., 2001, A comparative study of compact enhanced fien-and-tube heat exchangers, International Journal of Heat and Mass Transfer, Vol. 28, pp. 4282-4286.
Petter, N., Filipo, D., Havard, R., and Arne, B., 2004, Measurements and experience on semi-hermetic CO2 compressors, Fifth International Conference on Compressors and Coolants, IIR, Slovak Republic.
Stoecker, W. F., 1998, Industrial Refrigeration Handbook, McGraw Hill.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.