최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Journal of electrical engineering & technology, v.10 no.5, 2015년, pp.2052 - 2056
Lee, Jae-Jun (Dept. of Electrical Engineering, Hanyang University) , Lee, Ki-Doek (Dept. of Electrical Engineering, Hanyang University) , Jang, Ik-Sang (Mechatronics Group, Defence Program R&D Center, Samsung Techwin Co.) , Lee, Sung-Gu (R&D Team, Digital Appliances, Samsung Electronics Co.) , Chae, Woong-Chan (Research & Development Division, Hyundai Motor Co) , Lee, Hyung-Woo (Dept. of Railway Vehicle System Engineering, Korea National University of Transportation) , Lee, Ju (Dept. of Electrical Engineering, Hanyang University)
This Paper analyzes the characteristics of the WRSM in high-speed operation range. To verify the control characteritics of various WRSM models, the relative position of the central point of current limit circle and voltage limit ellipse is defined as M value and 3 models according to Mmax value are ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
G. Friedrich, “Experimental comparison between Wound Rotor and Permanent Magnet Synchronous machine for Integrated Starter Generator applications”, Energy Conversion Congress and Exposition (ECCE 2010), pp.1731-1736, 2010.
A. Girardin, G. Friedrich, “Optimal control for a Wound Rotor Synchronous starter generator”, Industry Applications Conference, pp.14-19, 2006.
H. Ben Hamed, N. Bernard, G. Feld, B. Multon, Machines synchrones, Fonctionnement en regime autopilote. Techniques de l'ingenieur. D 3524.
Y. S. Chen, Z. Q. Zhu, “Calculation of d- and q-Axis Inductances of PM Brushless ad Machines Accounting for Skew”, IEEE Transactions on Magnetics, Vol. 41, No. 10, pp. 3940-3942, October 2005.
E.Levi, “State-space d-q axis models of saturated salient pole synchronous machines”, IEE Proc.-Electr. Power Appl., Vol. 145, No. 3, pp. 206-216, May 1998.
K.J. Meessen, P. Thelin, J. Soulard, E.A. Lomonova, “Inductance Calculations of Permanent-Magnet Synchronous Machines Including Flux Change and Self- and Cross-Saturations”, IEEE Transactions on Magnetics, Vol. 44, No.10, pp. 2324-2331, October 2008.
S. Morimoto, Y. Takeda, T. Hirasa, K. Taniguchi, “Expansion of Operating Limits for Permanent Magnet Motor by Current Vector Control Considering Inverter Capacity”, IEEE Trans. On Industry Applications, IA-26, No. 5, pp. 866-871, 1990.
Ju Lee, Electric machinery, Hongrung publishing company, 2011.
S. Morimoto, K. Hatanaka, Y. Tong, Y. Takeda, T. Hirasa, “Servo Drive System and Control Characteristics of Salient Pole Permanent Magnet Synchronous Motor”, IEEE Transactions on Industry Applications, Vol. 29, No. 2, pp.338-343, 1993.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.