최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국유체기계학회 논문집 = The KSFM journal of fluid machinery, v.19 no.6, 2016년, pp.19 - 25
문성원 (인하대학교 대학원) , 김정호 (인하대학교 대학원) , 김동섭 (인하대학교 기계공학과)
Anti-icing is important in gas turbines because ice formation on compressor inlet components, especially inlet guide vane, can cause performance degradation and mechanical damages. In general, the compressor bleeding anti-icing system that supplies hot air extracted from the compressor discharge to ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
압축기 입구안내깃에 결빙이 흡착되면 어떠한 문제가 발생하는가 | 압축기 입구안내깃에 결빙이 흡착되면 몇 가지 문제가 발생한다. 압축기 입구의 면적이 줄어 압축기로 유입되는 공기의 양이 감소하게 되어 가스터빈의 성능이 저하되고(5) 압축기에서 서지(surge) 또는 스톨(stall)을 발생시킬 수 있다.(6) 또한 흡착된 얼음이 가스터빈의 안쪽으로 빨려 들어가면 심각한 기계적인 손상을 초래한다. 본 연구에서는 결빙에 의한 성능 저하보다 결빙으로 발생될 수 있는 기계적 손상을 예방하는 목적으로 결빙방지를 할 때 결빙방지 방법에 따른 성능 비교를 진행하였다. | |
발전용 가스터빈에서 결빙이 주로 발생하는 위치는 어디인가 | 응결이 진행되는 낮은 대기 온도 조건으로 운전 중인 발전용 가스터빈은 결빙으로 인한 문제가 발생한다. 발전용 가스터빈에서 결빙이 주로 발생하는 위치는 압축기 입구안내깃(inlet guide vane)이다. 압축기 입구안내깃에 결빙이 흡착되면 몇 가지 문제가 발생한다. | |
가스터빈의 결빙 문제를 해결하기 위해 어떠한 연구가 진행되고 있는가 | 이러한 결빙현상은 가스터빈의 성능 저하를 야기한다. 따라서 결빙 문제를 해결하기 위해 결빙방지(anti-icing) 시스템에 대한 다양한 연구가 진행되고 있다.(1,2) 현재 관련 연구는 항공기용 가스터빈에 집중되어 있다. |
Majed, S., 2006, "Anti-Icing in Gas Turbines," MS Thesis, Dept. of Energy Sciences, Lund University, Lund, Sweden.
Patton, R. E., 1976, "Gas Turbine Operation in Extreme Cold Climate," ASME Paper 76-GT-127.
Dong, W., Zhu, J., Zheng, M., and Chen, Y., 2015, "Thermal Analysis and Testing of Nonrotating Cone with Hoe-air Anti-icing System," Journal of Propulsion and Power, Vol. 31, No. 3, pp. 896-903.
Bernic, M. and Roy, L., 2011, "Gas Turbine Propulsion Systems," John Wiley & Sons, New York, pp. 150-151.
Kurz, R. and Brun, K., 2001, "Degradation in Gas turbine Systems," Journal of Engineering Gas Turbines and Power, Vol. 123, pp. 70-77.
Hill, D. G. T., 1973, "Gas Turbine Intake Systems in Unusual Environments," ASME Paper 73-GT-38.
Siemens Power Generation, Inc., 2009, "Siemens Gas Turbine Package SGT5-PAC 4000F," http://www.energy.siemens.com [Accessed, April 2016].
Chappell, M. S. and Grabe, W., 1974, "Icing Problems on Stationary Gas Turbine Power Plants," National Research Council of Canada.
Dickson, J., 1976, "Extreme Cold Weather Operation of Gas Turbines Shows Key Problems," Oil and Gas Journal, Vol. 74, No. 17, pp. 104-110.
Willbanks, C. E. and Schulz, R. J., 1975, "Analytical Study of Icing Simulation for Turbine Engines in Altitude Test Cells," Journal of Aircraft, Vol. 12, No. 12, pp. 960-967.
GE-Energy, 2013, GateCycle ver 6.1.2.
Farmer, R., 2015, "Gas Turbine World 2015 performance Specs," A Pequot Publishing Inc., Vol. 45, pp. 17.
Palmer, C. A. and Erbes, M. R., 1994, "Simulation Methods Used to Analyze the Performance of the GE PG6541B Gas Turbine Utilizing Low Heating Value Fuels," Proc. of ASME Cogen Turbo Power, pp. 1-10.
Frank, J. B., 2000, "GE Gas Turbine Performance Characteristics," GE Power Systems, GER-3567H.
Mitubish Hitach Power Systems, LTD., "M501G Series Gas Turbine Specification", https://www.mhps.com [Accessed, April 2016].
GE Power & Water, 2015, "Anti-icing System," GE Power Generations, GEA-32069A.
Wilbert, F. S. and Jerold W. J., 1982, "Refrigeration & Air Conditioning," McGraw-Hill, pp. 43.
Loud, R. L. and Slaterpryce, A. A., 1991, "Gas Turbine Inlet Air Treatment," GE Power Generations, GER-3419A.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.