최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국전산구조공학회논문집 = Journal of the computational structural engineering institute of Korea, v.29 no.1, 2016년, pp.29 - 36
Lifting lugs are frequently used to transport and to turn over blocks of ship and offshore structures in a shipyard. As the shipbuilding technology has been developed, blocks has become bigger and bigger, and block management technology takes a more important role in shipbuilding to enhance the prod...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
러그는 어디에 사용되는 부품인가? | 러그는 선박 및 해양구조물의 블록을 이동하거나 반전에 많이 사용되는 부품이다. 선박이나 해양구조물의 제작기술이 발전함에 따라 블록이 점차 대형화되고 있어, 생산성 향상을 위해 블록을 보다 효율적으로 다루는 기술에 대한 중요성이 대두되고 있다. | |
T형 러그의 구성은? | Fig. 6에서 보듯이 T형 러그는 본체, 브라켓 그리고 러그 홀 주위의 이중 판(double plate)으로서 3개의 부재로 구성되어 있다. 러그의 형상이 주어져 있다면 결국 설계는 이들 3개 부재의 두께를 결정하는 것이 된다. | |
T형 러그에 작용하는 하중에 따른 응력 분포와 변형 형상 실험 결과는? | Fig. 9에서 보듯이 하중의 크기가 점점 증가함에 따라 핀과 접촉되는 러그 홀 및 이중판 부분에 항복응력 수준의 응력이 발생되는 영역이 점차 넓어지고 러그 홀 주변에서의 변형이 심해지는 것을 알 수 있다. |
American Society of Mechanical Egineers (ASME) (2008) ASME-BTH-1; Design of Below-the-Hook Lifting Devices, ASME, USA.
Gen, M., Cheng, R. (2000) Genetic Algorithms and Engineering Optimization, A Wiley-Interscience Pub. Co.
Ham, J.K. (2000) Development of the Design System for the Lifting Lug Structure, J. Soc. Nav. Arch. Korea, 38, pp.86-98.
Kim, S.I. (2006) Block Lifting Analysis to Examine the Cause of Cracking in the Hopper Top Plate, J. Ocean Eng. & Technol., 20, pp.16-19.
Lee, J.S., Kim, M.S., Heo, N.H. (2014) The Strength Assessment and Design of T-type Lifting Lug, Proceedings of the Joint Conference of the Korean Association of Ocean Science and Technology Societies (KAOSTS), pp.814-819.
Lee, J.S., Heo, N.H. (2013) The Evaluation of the Structural Stress for the T-type Lifting Lug. Proceedings of the Joint Conference of the Korean Association of Ocean Science and Technology Societies (KAOSTS), p.2306.
Lee, S.J. Hwang, O.J. Oh, Y.T. Ha, S.H. Kim, Y.H. Lee, S.B., Kim, S.H. (2012) Strength Assessment of Padeye Hole and Lug Structure Assessment of Block Lifting Lug through Experiments, Proceedings of the Joint Conference of the Korean Association of Ocean Science and Technology Societies (KAOSTS), EXCO, Daegu, pp.597-606.
Min, D.K., Eum, S.M. (2011) A Study on the Optimization of Lifting Lug for Block Erection, Speci. Issue Soc. Nav. Arch. Korea, pp.82-89.
Seo, S.K. Kim, K.R. Eum, S.S., Seo, Y.S. (2011) Design and Strength Analysis of Lifting Lugs, peci. Issue Soc. Nav. Arch. Korea, pp.51-54.
Simulia (2013) Introduction to Abaqus, BB-Media, Korea.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.