최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기드라이브ㆍ컨트롤 = Journal of drive and control, v.13 no.1, 2016년, pp.27 - 33
박태조 (School of Mechanical Engineering, ERI, Gyeongsang National University) , 김민규 (Undergraduate School of Mechanical Engineering, Gyeongsang National University)
In hydraulic machinery, the hydraulic fluid acts primarily as working fluid and secondarily as a lubricant. Hence, the viscous friction force acting on the sliding components should be reduced to improve the mechanical efficiency. It is now well known that the surface texturing is a useful method fo...
Esposito, A., Fluid Power with Application, 7th ed., Prentice Hall, New Jersey, 2009.
Hong, Y. S. et al., "Improvement of the Low-speed Friction Characteristics of a Bent-Axis Type Hydraulic Piston Pump," J. of Drive and Control, Vol.1, No.3, pp.63-69, 2004.
Brizmer, V., Kligerman Y. and Etsion, I., "A Laser Surface Textured Parallel Thrust Bearing," Tribology Trans., Vol.46, pp.397-403, 2003.
Etsion, I., "State of the Art in Laser Surface Texturing," J. of Tribology, Vol.127, pp.248-253, 2005.
Ibata, T., Uddin, M. S. and Chowdhury, M. A. K., "Recent Development on Surface Texturing in Enhancing Tribological Performance of Bearing Sliders," Surface Coating Technology, Vol.272, pp.102-120, 2015.
Pettersson, U. and Jacobson, S., "Textured Surfaces for Improved Lubrication at High Pressure and Low Sliding Speed of Roller/Piston in Hydraulic Motors," Tribology Int., Vol.40, pp.355-359, 2007.
Wang, Z., Gu, L. and Li, L., "Experimental Studies on the Overall Efficiency Performance of Axial Piston Motor with a Laser Surface Textured Valve Plate," J. of Engineering Manufacture, Vol.227, No.7, pp.1049-1056, 2013.
Ivantysynova, M. and Baker, J. "Power Loss in the Lubricating Gap between Cylinder Block and Valve Plate of Swash Plate Type Axial Piston Machines," Int. J. of Fluid Power, Vol.10, No.2, pp.29-43, 2009.
Lee, J. O. and Park, T. J., "Lubrication Characteristics of Surface Textured Hydraulic Machine Components," J. of Korean Soc. Fluid Power Constr. Equip., Vol.9, No.4, pp.26-31, 2012.
FLUENT, FLUENT 14.0 Manual, 2011.
Cameron, A. and Ettles, C. M. Mc., Basic Lubrication Theory, 3rd ed., John Wiley & Sons, New York, 1981.
Park, T. J., "Lubrication Characteristics of Laser Textured Parallel Thrust Bearing : Part 3 - Effect of Number of Dimples," J. Korean Soc. Tribol. Lubr. Eng., Vol.27, No.6, pp.302-307, 2011.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.