최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국유체기계학회 논문집 = The KSFM journal of fluid machinery, v.19 no.1, 2016년, pp.18 - 23
김준형 (현대로템 응용기술연구팀) , 노주현 (현대로템 응용기술연구팀)
A HVAC(Heating Ventilation and Air Conditioning) is adapted to increase the comfort of the cabin environment for train. The train HVAC duct system has very long duct and many outlets due to the shape of a train set. the duct cross section shape is limited by a roof structure and equipments. Therefor...
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
타공판 저항계수란? | 5와 같이 6가지의 설계 변수들을 선정하였다. 타공판 저항계수는 타공판의 개구 면적을 나타내는 계수로, 해당 수치가 낮을수록 타공에 의한 개구 면적이 큼을 의미한다. 서론에서 언급하였듯이, 본 연구 대상 덕트 시스템은 가용 범위가 매우 길기 때문에 타공률 제어에 따른 구간별 유량 제어가 성능에 영향을 미칠 것으로 판단되었다. | |
후단부로 갈 수록 높은 저항 계수를 갖는 타공판과 개구면적은 어떤 상관관계가 있는가? | 특히 후단부일수록 높은 저항 계수를 갖는 타공판이 적용되었다. 이는 후단부로 갈수록 타공판의 개구 면적이 감소함을 의미한다. 길이가 긴 전동차용 덕트 시스템의 경우 시스템 유로가 주덕트와 보조턱트로 구분되어있다. | |
수치해석 시 타공부가 존재하는 단면을 다공영역(Porous zone)으로 설정한 후, 유동저항계수를 경계조건으로 부여하여 타공판 효과를 간접적으로 모사한 이유는 무엇인가? | 연구 대상 덕트 시스템의 주덕트(Main-duct) 내부에 장착된 보조 덕트(Sub-duct)는 측면에서 유동이 흡입 될 수있도록 타공판(Perforated plate) 으로 구성되었다. 수치해석 수행 시 타공부(Hole)를 그대로 모사할 경우 매우 많은 격자가 요구되기 때문에 수치해석의 효율성이 저하된다. 이러한 문제를 해결하기 위해 타공부가 존재하는 단면을 다공영역(Porous zone)으로 설정한 후, 유동저항계수를 경계조건으로 부여하여 타공판 효과를 간접적으로 모사할 수 있도록 하였다. |
Keating, M. K. and Staudt, F. J., 1996, "Hvac control system and method," U.S. Patent, No. 5,544,809.
Lemke, N. C., Lemke, J. L., and Koehler, J., 2012, "Secondary Loop System for Automotiv HVAC Units Under Different Climatic Conditions," International Refrigeration and Air Conditioning Conference, pp. 2393-2404.
Kintner-Meyer, M. and Emery, A. F., 1995, "Optimal control of an HVAC system using cold storage and building thermal capacitance," Energy and Buildings, Vol. 23, No. 1, pp. 19-31.
Nassif, N., Kajl, S., and Sabourin, R., 2005, "Optimization of HVAC control system strategy using two-objective genetic algorithm," HVAC&R Research, Vol. 11, No. 3, pp. 459-486.
Teeter, J. and Chow, M. Y., 1998, "Application of functional link neural network to HVAC thermal dynamic system identification," Industrial Electronics, IEEE Transactions on, Vol. 45, No. 1, pp. 170-176.
Lu, L., Cai, W., Soh, Y. C., Xie, L., and Li, S., 2004, "HVAC system optimization condenser water loop," Energy Conversion and Management, Vol. 45, No. 4, pp. 613-630.
Trcka, M. and Hensen, J. L., 2010, "Overview of HVAC system simulation," Automation in Construction, Vol. 19, No. 2, pp. 93-99.
Hyundai-rotem, 2015, "The noise reduction technology development of the EMU," 2nd annual report for Railroad Technology Research Program, Infrastructure and Transport of Korean government.
Chen, H. C., Patel, V. C., and Ju, S., 1990, "Solutions of Reynolds-averaged Navier-Stokes equations for threedimensional incompressible flows," Journal of Computational Physics, Vol. 88, No. 2, pp. 305-336.
Shih, T. H., Liou, W. W., Shabbir, A., Yang, Z., and Zhu, J., 1995, "A new k- ${\epsilon}$ eddy viscosity model for high reynolds number turbulent flows," Computers & Fluids, Vol. 24, No. 3, pp. 227-238.
Vaz, G., Waals, O. J., Ottens, H., Fathi, F., Le Souef, T., and Kiu, K., 2009, "Current Affairs : Model Tests, Semi-Empirical Predictions and CFD Computations for Current Coefficients of Semi-Submersibles," ASME 2009 28th International Conference on Ocean, Offshore and Arctic Engineering, USA, pp. 877-887.
Idelchik, I. E., 1988, "Flow Resistance," Hemisphere Publishing Corp., New York.
Guo, B. Y., Hou, Q. F., Yu, A. B., Li, L. F., and Guo, J., 2013, "Numerical modelling of the gas flow through perforated plates," Chemical Engineering Research and Design, Vol. 91, No. 3, pp. 403-408.
Giunta, A. A., Wojtkiewicz, S. F., and Eldred, M. S., 2003, "Overview of modern design of experiments methods for computational simulations," In Proceedings of the 41st AIAA aerospace sciences meeting and exhibit, AIAA-2003-0649.
Bengio, Y., 2000, "Gradient-based optimization of hyperparameters," Neural computation, Vol. 12, No. 8, pp. 1889-1900.
Conn, A. R., Elfadel, I. M., Molzen Jr, W. W., O'Brien, P. R., Strenski, P. N., Visweswariah, C., and Whan, C. B., 1999, "Gradient-based optimization of custom circuits using a static-timing formulation," In Proceedings of the 36th annual ACM/IEEE Design Automation Conference, pp. 452-459.
Beck, A. and Teboulle, M., 2009, "Fast gradient-based algorithms for constrained total variation image denoising and deblurring problems," Image Processing, IEEE Transactions on, Vol. 18, No. 11, pp. 2419-2434.
Wetter, M. and Wright, J., 2004, "A comparison of deterministic and probabilistic optimization algorithms for nonsmooth simulation-based optimization," Building and Environment, Vol. 39, No. 8, pp. 989-999.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.