최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기목재공학 = Journal of the Korean wood science and technology, v.44 no.2, 2016년, pp.172 - 183
Hartono, Rudi (Forestry Department, Faculty of Agriculture, University of Sumatera Utara) , Wahyudi, Imam (Department of Forest Products, Faculty of Forestry, Bogor Agricultural University) , Febrianto, Fauzi (Department of Forest Products, Faculty of Forestry, Bogor Agricultural University) , Dwianto, Wahyu (Research Center for Biomaterials, Indonesian Institute of Sciences) , Hidayat, Wahyu (Department of Forestry, Faculty of Agriculture, Lampung University) , Jang, Jae-Hyuk (Department of Forest Biomaterials Engineering, College of Forest and Environmental Science, Kangwon National University) , Lee, Seung-Hwan (Department of Forest Biomaterials Engineering, College of Forest and Environmental Science, Kangwon National University) , Park, Se-Hwi (Department of Forest Products, Faculty of Forestry, Bogor Agricultural University) , Kim, Nam-Hun (Department of Forest Biomaterials Engineering, College of Forest and Environmental Science, Kangwon National University)
Densification of the inner part of oil palm trunk (OPT) by the close system compression (CSC) method was performed in this study. The effects of the compression temperature and time on the anatomical, physical and mechanical properties of OPT were evaluated. The inner part of OPT with an initial ave...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Amin, Y., Dwianto, W., Prianto, A.H. 2004. Mechanical Properties of Compression Wood. Proceedings of National Seminar of MAPEKI VII. Makasar, Indonesia. pp. 90-95.
Amin, Y., dan Dwianto, W. 2006. Temperature and Steam Pressure Dependency on the Fixation of Compressed Wood by Close System Compression. Journal of Tropical Wood Science and Technology 4(2): 55-60.
British Standard, 1957. BS 373: Methods of Testing Small Clear Specimens of Timber. British Standards Institution, London.
Bakar, E.S. 2003. Oil Palm Trunk as Wood Substitute from Natural Forest. Forum Komunikasi Teknologi dan Industri Kayu Vol. 2. Department of Forest Product Technology. Faculty of Forestry, IPB.
Dwianto, W., Inoue, M., Norimoto, M. 1997. Fixation of Compressive Deformation of Wood by Heat Treatment. Mokuzai Gakkaishi 43(4): 303-309.
Dwianto, W., Norimoto, M., Morooka, T., Tanaka, F., Inoue, I., Liu, Y. 1998a. Radial Compression of Sugi. Wood (Cryptomeria japonica D. Don). Holz als roh-und Werkstoff 56: 403-411.
Dwianto, W., Inoue, M., Norimoto, M. 1998b. Permanent Fixation of Compressive Deformation of Albizia Wood (Paraserienthes falcata) by Heat Treatment. J. of Tropical Forest Products 4(1): 59-67.
Dwianto, W., Morooka, T., Norimoto, M. 1998c. The Compressive Stress Relaxation of Wood during Heat Treatment. Mokuzai Gakkaishi 44(6): 403-409.
Dwianto, W., Morooka, T., Norimoto, M. 1998d. A Method of Measuring Viscoelastic Properties of Wood under High-Temperature and High-Pressure Steam Conditions. Mokuzai Gakkaishi 44(2): 77-81.
Dwianto, W., Morooka, T., Norimoto, M., Kitajima, T. 1999. Stress Relaxation of Sugi (Cryptomeriajaponica D. Don) Wood in Radial Compression under High-Temperature Steam. Holzforschung 53(5): 541-546.
Febrianto, F., Bakar, E.S. 2004. Study on the basic properties and potential utilization of rubber wood and palm oil biomass in District of Musi Banyuasin, South Sumatera. Colaboration Project between District Government of Musi Banyuasin and IPB.
Hayashi, K., Sugimori, G., Yamashita, K. 2002. Color Change of Wood during High Temperatur Drying. Proceedings of 4th International Wood Science Symposium. Serpong. Indonesia. pp: 72-73.
Hidayat, W., Jang, J.H., Park, S.H., Qi, Y., Febrianto, F., Lee, S.H., Kim, N.H. 2015. Effect of Temperature and Clamping during Heat Treatment on Physical and Mechanical Properties of Okan (Cylicodiscus gabunensis [Taub.] Harms) Wood. BioResources 10(4): 6961-6974.
Higashihara, T., Morooka, T., Norimoto, M. 2000. Permanent fixation of transverly compressed wood by steaming and its mechanism. Mokuzai Gakkaishi 46(4): 291-297.
Inoue, M., Norimoto, M. 1991. Permanent fixation of compressive deformation in wood by heat treatment. Wood Research and Technical Notes 27: 31-40.
Inoue, M., Norimoto, M, Tanahashi, M., Rowell, R.M. 1993a. Steam or heat fixation of compressed wood. Wood Fiber Science 25(3): 224-235.
Inoue, M., Kadokawa, N., Nishio, J., Norimoto, M. 1993b. Permanent fixation of compressive deformation by hygro-thermal treatment using moisture in wood. Wood Res Bull. 29: 54-61.
Inoue, M., Sekino, N., Morooka, T., Rowell, R.M., Norimoto, M. 2008. Fixation of compressive deformation in wood by pre-steaming. Journal of Tropical Forest Science 20(4): 273-281.
Kamke, F.A. 2006. Densified radiata pine for structural composites. Ciencia y Technologia 8(2): 83-92.
Kawai, S., Wang, Q., Sasaki, H., Tanahashi, M. 1992. Production of compressed laminated veneer lumber by steam pressing. In: Proceedings of the Pacific Rim Bio-Based Composite Symposium, pp. 121-128.
Kutnar, A., Kamke, F.A. 2012. Compression of wood under saturated steam, superheated steam, and transient conditions at $150^{\circ}C$ , $160^{\circ}C$ , and $170^{\circ}C$ . Wood Science and Technology 46(1): 73-88.
Ministry of Agriculture Republic of Indonesia. 2012. Agriculture Statistic 2012, Indonesia.
Navi, O., Heger, F. 2004. Combined densification and thermo-hydro-mechanical processing of wood. Mrs Bull. 29(5): 332-336.
Nordin, A.N., Sulaiman, O., Hashim, R., Salim, N., Nasir, M., Sato, M., Hiziroglu, S. 2013. Effect of adhesive spreading rate on the performance on laminated compressed oil palm trunk. BioResources 10(4): 6378-6387.
Norimoto, M., Ota, C., Akitsu, H., Yamada, T. 1993. Permanent fixation of bending deformation in wood by heat treatment. Wood Research: Bulletin of the Wood Research Institute Kyoto University 79: 23-33.
Ratnasingam, J., Ioras, F. 2013. Finishing characteristics of heat treated and compressed Rubberwood. European Journal of Wood and Wood Products, 71(1): 135-137.
Salim, N., Hashim, R., Sulaiman, O., Nordin, N.A., Ibrahim, M., Akil, H.M., Sato, M., Sugimoto, T., Hiziroglu, S. 2013. Effect of steaming on some properties of compressed oil palm trunk lumber. BioResources 8(2): 2310-2324.
Sandoval-Torres, S., Jomaa, W., Marc, F., Puiggali, J.R. 2010. Causes of color changes in wood during drying. For. Stud. China 12(4): 167-175.
Shi, Q., Bao, F. C., Lu, J. X., Jiang, J. H. 2011. Effect of heat treatment temperature on the colour of Okan wood. Advanced Materials Research 214(1): 531-534.
Sundqvist, B. 2002. Color response of Scots pine (Pinus sylvestris), Norway spruce (Picea abies) and birch (Betula pubescens) subjected to heat treatment in capillary phase. Holz Roh Werkst 60: 106-114.
Sulistyono. 2001. Physical, Mechanical Properties, and Reliability Construction from Compressed-Agathis Wood (Agathis loranthifolia Salibs). [Thesis]. Forestry Science Department. Postgraduate Program. Institut Pertanian Bogor.
Wardhani, I.Y. 2005. Study of Basic Properties and Compression of Coconut Wood (Cocos nucifera L). [Disertation]. Bogor: Postgraduate Program. Institut Pertanian Bogor.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.