최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Advances in computational design, v.1 no.2, 2016년, pp.207 - 220
Manikandan, P. (Department of Civil Engineering, K.S.Rangasamy College of Technology) , Sukumar, S. (Department of Civil Engineering, Government College of Engineering)
The aim of this study is to investigate the effect of stiffened element and edge stiffener in the behaviour and flexural strength of built-up cold-formed steel beams. An experimental and analytical analysis of CFS channel sections in four different geometries is conducted, including simple channel s...
AISI: S100-2007 (2007), "Specification for the design of cold-formed steel structural members", American Iron and steel Institute.
Anapayan, T., Mahendran, M. and Mahaarachchi, D. (2011), "Lateral distortional tests of a new hollow flange channel beam", Thin wall. Struct, 49(1), 13-25.
Desmond, T.P., Pekoz, T. and winter, G. (1981), "Edge stiffeners for thin-walled members", J. Struct. Eng., ASCE, 107(2), 329-353.
Haidarali, M.R. and Nethercot, D.A. (2012), "Local and distortional buckling of cold-formed steel beams with both edge and intermediate stiffeners in their compression flanges", Thin Wall. Struct., 54, 106-112.
Haidarali, M.R. and Nethercot, D.A. (2012), "Local and distortional buckling of cold-formed steel beams with edge stiffened flanges", Thin Wall. Struct., 73, 31-42.
Huang, Y. and Young, B. (2013), "Experimental and numerical investigation of cold-formed lean duplex stainless steel flexural members", Thin Wall. Struct., 73, 216-228.
Kankanamge, N.D. and Mahendran, M. (2012), "Behaviour and design of cold-formed steel beams subject to lateral-torsional buckling'', Thin Wall. Struct., 51, 25-38.
Maduliat, S., Bambach, M.R. and Zhao, X.L. (2012a), "Inelastic behaviour and design of cold-formed channel sections in bending", Thin Wall. Struct., 51, 158-166.
Maduliat, S., Mendis, P. and Ngo, T.D. (2015), "Failure modes and buckling coefficient of partially stiffened cold-formed sections in bending", Thin Wall. Struct., 111, 21-30.
Manikandan, P., Sukumar, S. and Balaji, T.U. (2014), "Effective shaping of cold-formed thin-walled built-up beams in pure bending", Arab J. Sci. Eng., 39(8), 6043-6054.
Manikandan, P. and Sukumar, S. (2015), "Behaviour of stiffened cold-formed steel built-up sections with complex edge stiffeners under bending", KSCE J. Civ. Eng., 19(7), 2108-2115.
Naderian, H.R., Ronagh, H.R. and Azhari, M. (2014), "Elastic distortional buckling of doubly symmetric steel I-section beams with slender webs", Thin Wall. Struct., 84, 289-301.
Pan, C.L. and Yu, W.W. (2002), "Bending strength of hybrid cold-formed steel beams", Thin Wall. Struct., 40(5), 399-414.
Sabbagh, A.P., Petkovski, M., Pilakoutas, K. and Mirghaderi, R. (2011), "Ductile moment-resisting frames using cold-formed steel sections: An analytical investigation", Thin Wall. Struct., 67(4), 634-646.
Wang, H. and Zhang, Y. (2009), "Experimental and numerical investigation of cold-formed steel c-section flexural members", Thin Wall. Struct., 65(5), 1225-1235.
Young, B. and Ren, W. (2006), "Finite-element simulation and design of cold-formed steel channels subjected to web crippling", J. Struct. Eng., ASCE, 132(12), 1967-1974.
Yu, C. and Schafer, B.W. (2003), "Local buckling tests on cold-formed steel beams", J. Struct. Eng., ASCE, 129(12), 1596-1606.
Yu, C. and Schafer, B.W. (2006), "Distortional buckling tests on cold-formed steel beams", J. Struct. Eng., ASCE, 132(4), 515-528.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.