연직가동 수문의 개도에 따른 자유월류와 잠수월류 형태에 따른 방류량의 산정을 위한 유량계수 관계식을 개발하였다. 수문의 상류수심의 변화와 수문의 상류와 하류의 수위차는 유량과 수문의 개도높이와 상관이 있음을 확인하였다. 자유월류와 잠수월류에 따른 잠수도를 정의하고, 이를 이용한 유량계수 관계식을 개발하였다. 잠수도와 더불어 수문의 개도높이와 수문의 상류와 하류의 수심차와의 비를 이용한 유량계수 관계식을 제시하였다. 개발한 유량계수 관계식을 이용한 방류량과 실험유량간의 상관분석을 수행하였다. 그 결과 자유월류에서는 RMSE는 $0.0008m^3/s$, MAPE는 4.87%, 68%와 95% 신뢰도 구간에는 각각 67%, 92%가 포함됨을 확인하였다. 잠수월류에서는 RMSE는 $0.0006m^3/s$, MAPE는 4.18%, 68%와 95% 신뢰도 구간에는 각각 75%, 94%가 포함됨을 확인하였다. 따라서 개발한 유량계수 관계식에 의해 산정한 방류량과 실험유량은 높은 상관이 있어 사용성이 있는 것으로 판단된다.
연직가동 수문의 개도에 따른 자유월류와 잠수월류 형태에 따른 방류량의 산정을 위한 유량계수 관계식을 개발하였다. 수문의 상류수심의 변화와 수문의 상류와 하류의 수위차는 유량과 수문의 개도높이와 상관이 있음을 확인하였다. 자유월류와 잠수월류에 따른 잠수도를 정의하고, 이를 이용한 유량계수 관계식을 개발하였다. 잠수도와 더불어 수문의 개도높이와 수문의 상류와 하류의 수심차와의 비를 이용한 유량계수 관계식을 제시하였다. 개발한 유량계수 관계식을 이용한 방류량과 실험유량간의 상관분석을 수행하였다. 그 결과 자유월류에서는 RMSE는 $0.0008m^3/s$, MAPE는 4.87%, 68%와 95% 신뢰도 구간에는 각각 67%, 92%가 포함됨을 확인하였다. 잠수월류에서는 RMSE는 $0.0006m^3/s$, MAPE는 4.18%, 68%와 95% 신뢰도 구간에는 각각 75%, 94%가 포함됨을 확인하였다. 따라서 개발한 유량계수 관계식에 의해 산정한 방류량과 실험유량은 높은 상관이 있어 사용성이 있는 것으로 판단된다.
The equations of discharge coefficient for under flow through the openness of vertical lift weir were developed for the calculation of free and submerged flows. In hydraulic characteristic analyses, the variation of upstream depth and the depth difference between up and down stream of gate depend on...
The equations of discharge coefficient for under flow through the openness of vertical lift weir were developed for the calculation of free and submerged flows. In hydraulic characteristic analyses, the variation of upstream depth and the depth difference between up and down stream of gate depend on the gate openness and discharge. For free and submerged flows, the equations of discharge coefficient were developed by the definition of submergence ratio and the ratio of gate openness height to depth difference of up and down stream at gate in addition to the submergence ratio as well. Correlation analyses were carried out between flows of the experimental and the calculated by the developed equation of discharge coefficient. For free flow, the root mean square error (RMSE) and mean absolute percentage error (MAPE) were $0.0008m^3/s$ and 4.87%, respectively. There were 67% and 92% calculation discharges within the 68% and 95% confidence intervals (CI), respectively. For submerged flow, the RMSE and MAPE were $0.0006m^3/s$ and 4.18%, respectively. There were 75% and 94% calculation discharges within the 68% and 95% confidence intervals (CI), respectively, indicating a high degree of correlation between the experimental and calculate discharges results in the applicability.
The equations of discharge coefficient for under flow through the openness of vertical lift weir were developed for the calculation of free and submerged flows. In hydraulic characteristic analyses, the variation of upstream depth and the depth difference between up and down stream of gate depend on the gate openness and discharge. For free and submerged flows, the equations of discharge coefficient were developed by the definition of submergence ratio and the ratio of gate openness height to depth difference of up and down stream at gate in addition to the submergence ratio as well. Correlation analyses were carried out between flows of the experimental and the calculated by the developed equation of discharge coefficient. For free flow, the root mean square error (RMSE) and mean absolute percentage error (MAPE) were $0.0008m^3/s$ and 4.87%, respectively. There were 67% and 92% calculation discharges within the 68% and 95% confidence intervals (CI), respectively. For submerged flow, the RMSE and MAPE were $0.0006m^3/s$ and 4.18%, respectively. There were 75% and 94% calculation discharges within the 68% and 95% confidence intervals (CI), respectively, indicating a high degree of correlation between the experimental and calculate discharges results in the applicability.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.