최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기전기학회논문지 = The Transactions of the Korean Institute of Electrical Engineers, v.65 no.5, 2016년, pp.769 - 772
우동균 (Dept. of Electrical Eng. Yeungnam University)
In this paper, the overhang structure was applied to the axial flux permanent magnet (AFPM) motor. This paper describes the overhang effect in the AFPM motor. Moreover, the overhang effect was analyzed according to the different overhang length and an optimal overhang structure was proposed. Finally...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
AFPM 전동기에서 오버행 효과는 어떻게 얻는것인가? | RFPM 전동기에서는 고정자의 축 방향 길이보다 회전자의 축 방향 길이가 긴 오버행 구조를 통해 오버행 효과를 얻을 수 있다. AFPM 전동기에서는 고정자의 방사(radial)방향 길이보다 회전자의 방사방향 길이가 긴 구조를 통해, 오버행 효과를 얻을 수 있다. 전동기의 설계방법으로는 등가자기 회로법으로 구현하는 집중정수법이나 finite element(FE) 해석을 이용하는 분포정수법으로 나눌 수 있다. | |
등가자기 회로법으로 구현하는 집중정수법이 FE해석이 비해 가지는 장단점은? | 오버행 구조를 고려한 기존의 연구방법으로는 대부분 FE해석을 이용해 왔다[3]. 등가자기 회로법을 통해 오버행 구조를 고려하는 경우 FE 해석에 비해 해석시간이 빠른 장점이 있는 반면, FE 해석에 비해 결과의 신뢰성이 떨어진다는 단점이 있다. 2DFE 해석은 모델링과 계산시간의 측면에서 3D FE 해석보다 빠른 장점이 있다. | |
영구자석 전동기은 어떻게 구분할 수 있는가? | 영구자석 전동기는 영구자석이 회전자에 부착되는 구조에 따라 SPM (surface-mounted permanet magnet) 전동기와 IPM(interior permanent magnet) 전동기로 구분할 수 있고[1],[2], 자속이 공극을 지나는 방향에 따라 radial flux permanent magnet(RFPM) 전동기와 axial flux permanent magnet(AFPM) 전동기로 구분할 수 있다[3]. |
Jang-Ho Seo, Sang-Yeop Kwak, Sang-Yong Jung, Cheol-Gyun Lee, Tae-Kyung Chung, and Hyun-Kyo Jung, "A Research on Iron Loss of IPMSM With a Fractional Number of Slot Per Pole," IEEE Trans. Magn., vol. 45, no. 3, pp. 1824-1827, Mar. 2009.
Jang-Ho Seo, Chang-Hwan Im, Sang-Yeop Kwak, Cheol-Gyun Lee, and Hyun-Kyo Jung, "An Improved Particle Swarm Optimization Algorithm Mimicking Territorial Dispute Between Groups for Multimodal Function Optimization Problems," IEEE Trans. Magn., vol. 44, no. 6, pp. 1046-1049, Jun. 2007.
J. F. Gieras, R. J. Wang, and M. J. Kamper, "Axial flux permanent magnet brushless machines," Springer, 2008.
Y. D. Chun, and S. Wakao, "Magnetic force characteristics according to the variation of asymmetric overhang ratio in brushless direct current motor," J. Appl. Phys., vol. 93, no. 10, pp. 8775-8777, May 2003.
K. C. Kim, D. H. Koo, and J. Lee, "The study on the overhang coefficient for permanent magnet machine by experimental design method," IEEE Trans. Magn., vol. 43, no. 6, pp. 2483-2485, Jun. 2007.
K. C. Kim, and J. Lee, "Overhang effect analysis of permanent magnet machine according to the rotor types", in proc. 12th Biennial IEEE Conf. Electromagn. Field Comput., CEFC, 2006, USA, p. 414.
Y. D. Chun, J. Lee, and S. Wakao, "Overhang effect analysis of brushless DC motor by 3-D equivalent magnetic circuit network method," IEEE Trans. Magn., vol. 39, no. 3, pp. 1610-1613, May 2003.
D. K. Woo, D. K. Lim, H. K. Yeo, J. S. Ro, and H. K. Jung, "A 2D finite element analysis for a permanent magnet synchronous motor taking an overhang effect into consideration," IEEE Trans. Magn., vol. 49, no. 8, pp. 4894-4899, Aug. 2013.
Han-Kyeol Yeo, Dong-Kyun Woo, Dong-Kuk Lim, Jong-Suk Ro, and Hyun-Kyo Jung, "Analysis of a Surface-Mounted Permanent-Magnet Machine with Overhang Structure by Using a Novel Equivalent Magnetic Circuit Model," JEET, vol. 9, no. 6, pp. 1960-1966, Sep. 2014.
D. K. Woo, J. H. Choi, M. Ali, and H. K. Jung, "A Novel Multimodal Optimization Algorithm Applied to Electromagnetic Optimization," IEEE Trans. Magn., vol. 47, no. 6, pp. 1667-1673, Jun. 2011.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.