최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국기계가공학회지 = Journal of the Korean Society of Manufacturing Process Engineers, v.15 no.1, 2016년, pp.74 - 80
변재영 (부산대학교 바이오산업기계공학과) , 이창주 (서울대학교 농업생명과학연구원) , 장준수 (상희금속 주식회사) , 최원식 (부산대학교 바이오산업기계공학과)
Due to the increased use of power caused by industrial development, the importance of improving wear and friction in the contact region has emerged. Except for some parts, such as brakes or clutches and friction, seals and precision mechanical parts (e.g., pistons, bearings, valves, and cams) are im...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Smetsers, H. M. A., FE analyses of Pin on Disc tests to analyze hybrid CVT behavior, 2007.
Bortoleto, E.M., Rovani, A.C., Seriacopi, V., Profito, F.J., Zachariadis, D.C., Machado, I.F., Sinatora, A. and Souza, R.M., "Experimental and numerical analysis of dry contact in the pin on disc test," Wear, Vol. 301, No. 1, pp. 19-26, 2013.
Kanavalli, B., "Application of User Defined Subroutine UMESHMOTION in ABAQUS for Simulating Dry Rolling/Sliding Wear," A Thesis of Doctor, Royal Institute of Technology, Sweden, 2006.
Hegadekatte, V., Huber, N. and Kraft, O., "Modeling and simulation of wear in a pin on disc tribometer," Tribology Letters, Vol. 24, No. 1, pp. 51-60, 2006.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.