최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국산학기술학회논문지 = Journal of the Korea Academia-Industrial cooperation Society, v.17 no.5, 2016년, pp.601 - 611
김후승 (서울시립대학교 토목공학과) , 오주 (특허청)
The research, development and use of seismic isolation systems have been increasing with the gradual development of structure safety assurance methods for earthquakes. The High Damping Rubber Bearing (HDRB), one type of seismic isolation system, is a Laminated Rubber Bearing using special High Dampi...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
고감쇠 고무받침은 무엇인가? | 고감쇠 고무받침(High Damping Rubber Bearing, HDRB)은 지진과 같은 외부에너지에 의해 변형하면서 에너지를 흡수하는 능력을 갖는 특수한 고감쇠 고무(HDR)를 이용한 적층형 고무받침으로서 감쇠 기능을 가진 지진격리장치이다. 이는 고무배합을 변화시킴에 따라 여러 가지 이력특성을 변화시킬 수 있는 장점이 있으나 유사 지진격리장치인 납 고무받침에 비하여 에너지 소산 능력인 감쇠기능이 다소 떨어지는 단점이 있다 (Takayama, 1997). | |
지진격리시스템은 무엇인가? | , 1998). 국외의 경우 주로 건축물, 교량, 원자력 발전소 등 대형구조물이 지진과 같은 동적하중에 대한 피해를 최소화하기 위해 구조물의 진동을 감소시키기 위한 수동제어(Passive Control)기법 중의 하나인 지진격리시스템(Seismic Isolation System)이 널리 사용되고 있으며, 미국, 일본, 이탈리아 등을 중심으로 연구 및 응용이 활발하게 진행되고 있다(Kelly, 1986). 현재 국내에서도 지진격리장치에 대한 연구개발과 사용이 점차 증가하고 있으나, 지진격리장치를 이용한 지진격리설계 (Seismic Isolation Design)기준 및 설계절차, 실험평가 기준 등이 충분히 마련되어 있지 않은 실정이다. | |
Chung et al.(1997)과 Yi et al.(2002)의 유사동적 실험 및 진동대 실험 결과로 알 수 있는 것은? | (2002)은 각각 지진 격리된 3층, 5층 구조물의 내진성능을 평가하기 위해 다양한 지진파를 입력하여 유사동적 실험 및 진동대 실험하였다. 이를 통해 고무받침을 이용한 지진격리 구조가 지진동에 효과적인 방법임을 확인하였다. |
Koo GH, Lee JH, Yoo B, "Performance Experiments and Analysis of Nonlinear Behavior for HDRB Using in Seismic Isolation, J. of EESK, EESK, Vol. 2, No. 4, pp.1-113, 1998.
Jung GY, Ha DH, Park KN, Kim DH, "Experimental study on characteristics of low hardness rubber bearing", J. of KSCE, KSCE, Vol. 22, No. 6A, pp.1295-1307, 2002.
Oh J, Jung HY, "An Experimental Study for the Shear Property Dependency of High Damping Rubber Bearings", J. of KSCE, KSCE, Vol. 30, No. 2A, pp.121-129, 2010.
Takayama Mineo, "Isolation to 4 seconds-Sesimic Isolation Design", Engineering Books, 1997.
J.S.S.I, "Introduction to Seismic Isolation Structure", Japan Society of Seismic Isolation, Ohmsa, 2002.
Kelly JM, "A Seismic Base Isolation : Review and Bibliography", Soil Dynamics and Earthquake Engineering, Vol. 5, pp.202-216, 1986. DOI: http://dx.doi.org/10.1016/0267-7261(86)90006-0
Lee IM, Earthquake and Soil, Korea Society Civil Engineering, Vol.35, No.5, pp.40-42, 1987.
Kim YS, Im JS, Yun CB, Kim NS, "Shaking Table Tests and Simplified Anasysis of Bridge with Base Isolators Consisting of PTFE Plates and Rubber Rings", J. of KSCE, KSCE, Vol. 19, No. I-6, pp.899-906, 1999.
Chung WJ, Yun CB, Kim NS, Seo JW, "Shaking table and psedodynamic tests for the evaluation of the seismic performance of base-isolated structures", Engineering Structures, Vol. 21, pp.365-379, 1999. DOI: http://dx.doi.org/10.1016/S0141-0296(97)00211-3
Yi MW, Bijan S, "Shaking table testing of a base isolated model", Engineering Structures, Vol. 24, pp.1203-1215, 2002. DOI: http://dx.doi.org/10.1016/S0141-0296(02)00054-8
Tsai MH, Wu SY, Chang KC, Lee GC, "Shaking table tests of a scaled bridge model with rolling-type seismic isolation bearings", Engineering Structures, Vol. 29, pp.694-702, 2007. DOI: http://dx.doi.org/10.1016/j.engstruct.2006.05.025
Kim MK, Choun YS, Choi IK, "A Shaking Table Test for Equipment Isolation in the NPP(I):Rubber Beaing, J. of EESK, EESK, Vol. 8, No. 5, pp.65-77, 2004.
ISO 22762, Elastomeric Seismic Protection Isolators Part-1 : Test Methods, 2010.
ISO 22762, Elastomeric Seismic Protection Isolators Part-2 : Applications for bridge- specifications, 2010.
Korea Road and Transportation Association, Limit-State based Bridge Design Specification, Ministry of Load Infrastructure and Transport, 2012.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.