최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국생산제조시스템학회지 = Journal of the Korean Society of Manufacturing Technology Engineers, v.25 no.3, 2016년, pp.211 - 216
구준영 (School of Mechanical Engineering, Pusan National University) , 황문창 (School of Mechanical Engineering, Pusan National University) , 이종환 (Dept. of Mechatronics Engineering, Korea Polytechnic Air Colleges) , 김정석 (School of Mechanical Engineering)
Al alloys are useful materials having high specific strength and are used in machining of parts having thin-walled structures for weight reduction in aircraft, automobiles, and portable devices. In machining of thin-walled structures, it is difficult to maintain dimensional accuracy because machinin...
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
얇은 벽 구조물이 가공표면건전성의 저해를 어떻게 유발할 수 있는가? | 하지만 얇은 벽 구조물은 가공 시 절삭력과가공열에 의해 가공변형이 발생할 가능성이 높으며, 이로 인해 형상정밀도 및 치수정밀도가 악화될 가능성이 높다. 또한 과도한 가공조건에 의해 발생하는 진동은 표면상태를 악화시킴으로써 가공표면건전성을 저해한다. 따라서 알루미늄 합금의 얇은 벽 구조물가공에서 가공변형을 최소화하고 생산성을 보장할 수 있는 적합한 절삭조건을 선정하는 것은 매우 중요하다. | |
알루미늄 합금의 장점은 무엇인가? | 다양한 경량화 소재 중에서 알루미늄 합금은 비강도가 높은 소재로 얇은 벽 구조로 가공하여도 강성과 강도를 유지할 수 있는 매우 효과적인 소재이며 안전과 관련이 있는 자동차와 항공기의 기계구조용 부품의 소재로 사용되고 있다[2] . 뿐만 아니라, 최근에는 견고함과 경량화가 필요한 개인용 휴대기기의 프레임 및 외관 구조물의 소재로도 사용되고 있다. | |
소재의 절삭에너지가 날당 이송과 반경방향 깊이와 연관이 있는 이유는 무엇인가? | 날당 이송과 반경방향 깊이의 증가에 따른 신호값의 변화는 소재의 절삭에너지와 관련이 있는 것으로 사료된다. 이러한 현상은 반경방향 절삭깊이가 증가함에 따라 소성변형 영역이 커지고 절삭가공에 소요되는 에너지가 증가하기 때문으로 사료된다. |
Mohan, K. S., Pramod, R., Shashi, K. M. E., Govindaraju, H. K., 2014, Evaluation of Fracture Toughness and Mechanical Properties of Aluminum Alloy 7075, T6 with Nickel Coating, Procedia Engineering, 97 178-185.
Odeshi, A. G., Adesola, A. O., Badmos, A. Y., 2013, Failure of AA6061 and 2099 Aluminum Alloys under Dynamic Shock Loading, Engineering Failure Analysis, 35 302-314.
Ning, H., Zhigang, W., Chengyu, J., Bing, Z., 2001, Analysis on High-speed Face-milling Of 7075-T6 Aluminum using Carbide and Diamond Cutters, Int. Journal of Machine Tool and Manuf., 41:12 1763-1781.
Seguy, S., Dessein, G., Arnaud, L., 2008, Surface Roughness Variation of Thin Wall Milling, Related to Modal Interactions, Int. Journal of Machine Tools and Manuf., 48:3/4 261-274.
Rai, J. K., Xirouchakis, P., 2008, Finite Element Method based Machining Simulation Environment for Analyzing Part Errors Induced During Milling of Thin-walled Components, Int. Journal of Machine Tool and Manuf., 48:6 629-643.
Subramanian, M., Sakthivel, M., Sooryaprakash, K., Sudhakaran, R., 2013, Optimization of End Mill Tool Geometry Parameters For Al7075-T6 Machining Operations based on Vibration Amplitude by Response Surface Methodology, Procedia Engineering 64:10 690-700.
Lee, C. M., Kim, S. W., Choi, K. H., Lee, D. W., 2003, Evaluation of Cutter Orientations In High-speed Ball End Milling of Cantilevershaped Thin Plate, Journal of Materials Processing Technology, 140:1/3 231-236.
Matweb, n.d., viewed 8 May 2015, .
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.