최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국기계가공학회지 = Journal of the Korean Society of Manufacturing Process Engineers, v.20 no.11, 2021년, pp.52 - 59
김종민 (경상국립대학교 대학원, 한국치공구공업(주)) , 구준영 (벧엘기계(주)) , 전차수 (경상국립대학교 산업시스템공학부, 공학연구원)
Titanium alloy (Ti-alloy) is widely used as a material for core parts of aircraft structures and engines that require both lightweight and heat-resistant properties owing to their high specific stiffness. Most parts used in aircraft have I-, L-, and H-shaped thin-walled structures for weight reducti...
Lee, Y. T., Titanium(in Korean), Iron and Steel News, 2016.
Kahles, J. F., Field, M., Eylon, D., & Froes, F. H., "Machining of Titanium Alloys," Jom, Vol. 37, No. 4, pp. 27-35, 1985.
Campa, F. J., de Lacalle, L. L., Lamikiz, A., & Sanchez, J. A., "Selection of cutting conditions for a stable milling of flexible parts with bull-nose end mills," Journal of Materials Processing Technology, Vol. 191, pp. 279-282, 2007.
Bhaumik, S. K., Divakar, C., & Singh, A. K., "Machining Ti-6Al-4V alloy with a wBN-cBN composite tool," Materials & Design, Vol. 16, pp. 221-226, 1995.
Lee, J. H., Kim, H. Y., Yoon, H. S., "Sustainability Analysis in Titanium Alloy Machining," Journal of The Korean Society of Manufacturing Process Engineers, Vol. 18 No. 12 pp.73-81 2019.
F Sun, S Qu, Y Pan, X Li, C Yang, "Machining performance of a grooved tool in dry machining Ti-6Al-4 V" The International Journal of Advanced Manufacturing Technology, 73, pp. 613-622, 2014.
Kim, J. M., Koo, J. Y., Kim, J. S., Jun, C. S., "Optimization of Machining Conditions in Milling of Titanium Alloy (Ti-6A1-4V) Using the Response Surface Method." Journal of The Korean Society of Manufacturing Process Engineers, Vol. 18, No. 10, pp. 60-67, 2019.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.