최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국동력기계공학회지 = Journal of the korean society for power system engineering, v.20 no.3, 2016년, pp.51 - 56
강대민 (부경대학교 기계공학과) , 장진숙 ((주)홍덕기공) , 박경도 (부산인력개발원) , 이대열 (부산인력개발원)
In this study, the tensile tests and hardness tests were carried out for the joints characteristics in friction stir welds of Al 5052 alloy. Three way factorial design was applied to optimal welding conditions, whose control factors were shoulder diameter, rotation speed and welding speed of tool. F...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
Al 5052 알루미늄 합금재의 장점은 무엇인가? | Table 1은 실험에 사용된 Al 5052 알루미늄 합금재의 화학조성을 나타낸 것으로, 알루미늄 베이스에 Mg를 주 첨가한 합금으로 강도가 높은 비열 처리 합금이며 용접성이 양호하고 내식성 좋다. | |
마찰교반용접은 무엇인가? | 보통 각종 기기 및 구조물 등은 용접에 의해 조립되나 알루미늄 합금의 용접은 기술과 경제적인 측면에서 해결해야 할 많은 문제점을 지니고 있다. 그러나 최근 이러한 알루미늄 합금의 용접시 발생하는 여러 문제점을 해결하는 방법으로 용접부의 모재보다 경도가 높은 공구의 회전력을 사용하여 모재에 마찰열을 발생시키어 용접부 내부에 발생하는 교반작용으로 두 재료를 접합시키는 마찰교반용접(Friction Stir Welding, FSW)1-3)이 적용되고 있다. 이러한 마찰교반용접은 기존 아크 용접법에 비해 많은 장점이 지니고 있는 기술로서 1991년 영국의 TWI(The Welding Institude)에 의해 특허가 출원된 이래 90년대 중반부터 Al 합금을 비롯하여 각종 합금의 용접공정에 실용화가 이루어지고 있다. |
S. K. Jang and S. H. Shin, 2001, "A Development of Optimizing Tools for Friction Stir Welding with 2mm Thick Aluminum Alloy using a Milling Machine", Journal of The Korean Society of Marine Engineers, Vol. 25, No. 4, pp. 791-796
D. M. Kang, K. D. Park, and Y. S. Jung, 2013, "Thermal and mechanical anlaysis on friction stir welding of AZ31 magnesium alloy by the finite element method", Journal of the Korean Society for Power System Engineering, Vol. 17, No. 4, pp. 64-71
D. M. Kang and J. S. Jang, 2015, "Friction Stir Welding Characteristics of Al5052 Aluminium Alloy by Design of Experiment", Journal of the Korean Society for Power System Engineering, Vol. 19, No. 4, pp. 11-16
M. W. Mahoney and C. G. Rhodes, 1998, "Properties of friction-welded 7075 T651 aluminum", Metall Mater Trans A, 29A, 1955-64
P. David and T. W. Field, 2001, "Heterogeneity of crystallographic texture in friction stir welds of aluminium", Metall Mater Trans A, 32A, 2869-77
T. U. Seidel, A. P. Reynolds, 2001, "Visualization of the material flow in AA2195 friction stir welds using a market insert technique", Metall Mater Trans A, 32A, 2879-84
S. G. Lim, S. S. Kim, C. G. Lee and S. J. Kim, 2003, "Microstructural Evolution and Tensile Behavior of Stir Friction Welded Al Alloys", Met. Mater., Vol. 41, No. 11, pp. 743-749
S. T. Won, W. K. Kim, and B. C. Goo, 2010, "Mechanical Properties of Joints according to Welding Methods and Sensitivity Analysis of FSW's Welding Variables for A6005 Extruded Alloy of Rolling Stock", The Korean Society for Railway, Vol. 13, No. 2, pp. 131-138
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.