$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

전기화학 증착법에 의해 합성된 폴리옥소메탈레이트/폴리피롤/탄소천 전극의 전기화학적 특성
Electrochemical Characteristics of Polyoxometalate/Polypyrrole/Carbon Cloth Electrode Synthesized by Electrochemical Deposition Method 원문보기

공업화학 = Applied chemistry for engineering, v.27 no.4, 2016년, pp.421 - 426  

윤조희 (강원대학교 화학공학과) ,  최봉길 (강원대학교 화학공학과)

초록
AI-Helper 아이콘AI-Helper

본 연구에서는 폴리옥소메탈레이트(polyoxometalate, POM)가 도핑된 폴리피롤(polypyrrole, Ppy)을 3차원 구조의 탄소천(carbon cloth, CC) 표면 위에 전기화학적 증착법을 이용하여 합성하고 이의 의사커패시터 특성을 순환전압전류법과 정전류 충전-방전법을 사용하여 분석하였다. POM-Ppy의 코팅은 전기화학적 증착 시간에 따라서 얇은 conformal형태의 코팅으로 조절되었다. 제조된 POM-Ppy/CC의 재료 특성은 전자주사현미경과 X-선 분광분석을 사용하여 분석하였다. POM-Ppy/CC의 3차원 나노복합체 구조는 높은 비정전용량($561mF/cm^2$), 고속 충방전(85% 용량 유지율) 및 장수명 특성(97% 용량 유지율)을 나타내었다.

Abstract AI-Helper 아이콘AI-Helper

In this report, polyoxometalte (POM)-doped polypyrrole (Ppy) was deposited on surface of three-dimensional carbon cloth (CC) using an electrodeposition method and its pseudocapacitive behavior was investigated using cyclic voltammetry and galvanostatic charge-discharge. The POM-Ppy coating was thin ...

주제어

AI 본문요약
AI-Helper 아이콘 AI-Helper

* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.

제안 방법

  • The electrolyte used is a 1 M H2SO4 aqueous solution. In order to evaluate supercapacitor performance, CV tests were carried out at various scan rates from 10 to 100 mV/s. Galvanostatic charge/discharge measurements were made at current densities from 1 to 30 mA/cm-2.

대상 데이터

  • , Ltd. The deionized (DI) water (18.2 MΩ cm, Millipore Milli Q water system) was used in all experiments.
  • The Pt wire and an Ag/AgCl electrode were used as the counter and reference electrode, respectively. The electrolyte used is a 1 M H2SO4 aqueous solution. In order to evaluate supercapacitor performance, CV tests were carried out at various scan rates from 10 to 100 mV/s.

이론/모형

  • All of electrochemical measurements, including cyclic voltammetry (CV) and galvanostatic charge/discharge, were conducted on a VersaSTAT 4 (Princeton Applied Research) using a conventional three-electrode system. The Pt wire and an Ag/AgCl electrode were used as the counter and reference electrode, respectively.
본문요약 정보가 도움이 되었나요?

참고문헌 (28)

  1. C. Zhou, Y. Zhang, Y. Li, and J. Liu, Construction of high-capacitance 3D CoO@polypyrrole nanowire array electrode for aqueous asymmetric supercapacitor, Nano Lett., 13, 2078-2085 (2013). 

  2. T. Liu, L. Finn, M. Yu, H. Wang, T. Zhai, X. Lu, Y. Tong, and Y. Li, Polyaniline and polypyrrole pseudocapacitor electrodes with excellent cycling stability, Nano Lett., 14, 2522-2527 (2014). 

  3. L Yang, S. Cheng, Y. Ding, X. Zhu, Z. L. Wnag, and M. Liu, Hierarchical network architectures of carbon fiber paper supported cobalt oxide nanonet for high-capacity pseudocapacitors, Nano Lett., 12, 321-325 (2012). 

  4. M. Yang, S. B. Hong, and B. G. Choi, Hierarchical core/shell structure of $MnO_2$ @polyaniline composites grown on carbon fiber paper for application in pseudocapacitors, Phys. Chem. Chem. Phys., 17, 29874-29879 (2015). 

  5. X. Zhao, B. M. Sanchez, P. J. Dobson, and P. S. Gran, The role of nanomaterials in redox-based supercapacitors for next generation energy storage devices, Nanoscale, 3, 839-855 (2011). 

  6. S. Zhang, and N. Pan, Supercapacitors performance evaluation, Adv. Energy Mater., 5, 1401401-1401420 (2015). 

  7. K. Naoi, S. Ishimoto, J.-I. Miyamoto, and W. Naoi, Second generation 'nanohybrid supercapacitor': evoluation of capacitive energy storage devices, Energy Environ. Sci., 5, 9363-9373 (2012). 

  8. C.-C. Hu, K.-H. Chang, M.-C. Lin, and Y.-T. Wu, Design and tailoring of the nanotubular arrayed architecture of hydrous $RuO_2$ for next generation supercapacitors. Nano Lett., 6, 2690-2695 (2006). 

  9. M. M. P. Madrigal, F. Estrany, E. Armelin, D. D. Diaz, and C. Aleman, Towards sustainable solid-state supercapacitors: electroactive conducting polymers combined with biohydrogels, J. Mater. Chem. A, 4, 1792-1805 (2016). 

  10. J. Cherusseri and K. K. Kar, Polypyrrole-decorated 2D carbon nanosheet electrodes for supercapacitors with high areal capacitance, RSC Adv., 6, 60454-60466 (2016). 

  11. K. Zhang, L. L. Zhang, X. S. Zhao, and J. Wu, Graphene/polyaniline nanofiber composites as supercapacitor electrodes, Chem. Mater., 22, 1392-1401 (2010). 

  12. S. Cho, K.-H. Shin, and J. Jang, Enhanced electrochemical performance of highly porous supercapacitor electrodes based on solution processed polyaniline thin films, ACS Appl. Mater. Interfaces, 5, 9186-9193 (2013). 

  13. T. G. Yun, B. I. Hwang, D. Kim, S. Hyun, and S. M. Han, Polypyrrole- $MnO_2$ -coated textile-based flexible-stretchable supercapacitor with high electrochemical and mechanical reliability, ACS Appl. Mater. Interfaces, 7, 9228-9234 (2015). 

  14. C. Bora, J. Sharma, and S. Dolui, Polypyrrole/sulfnoated graphene composite as electrode material for supercapacitor, J. Phys. Chem. C, 118, 29688-29694 (2014). 

  15. S. Biswas and L. T. Drzal, Multilayered nanoarchitecture of graphene nanosheets and polypyrrole nanowires for high performance supercapacitor electrodes, Chem. Mater., 22, 5667-5671 (2010). 

  16. F. F. D. Belanger, Electropolymerization of polypyrrole and polyaniline-polypyrrole from organic acidic medium, J. Phys. Chem. B, 103, 9044-9054 (1999). 

  17. D. Y. Liu and J. R. Reynolds, Dioxythiophene-based polymer electrodes for supercapacitor modules, ACS Appl. Mater. Interfaces, 2, 3586-3593 (2010). 

  18. S. Chen and I. Zhitomirsky, Polypyrrole electrodes doped with sulfanilic acid azochromotrop for electrochemical supercapacitors, J. Power Sources, 243, 865-871 (2013). 

  19. K. Shi and I. Zhitomirsky, Influence of current collector on capacitive behavior and cycling stability of tiron doped polypyrrole electrodes, J. Power Sources, 240, 42-49 (2013). 

  20. M. Yang, B. G. Choi, S. C. Jung, Y.-K. Han, Y. S. Huh, and S. B. Lee, Polyoxometalate-coupled graphene via polymeric ionic liquid linker for supercapacitors, Adv. Funct. Mater., 24, 7301-7309 (2014). 

  21. M. Yang, D. S. Kim, J. H. Yoon, S. B. Hong, S. W. Jeong, D. E. Yoo, T. J. Lee, S. J. Lee, K. G. Lee, and B. G. Choi, Nanopillar films with polyoxometalate-doped polyaniline for electrochemical detection of hydrogen peroxide, Analyst, 141, 1319-1324 (2016). 

  22. J. Hu, Y. Ji, W. Chen, C. Streb, and Y.-F. Song, "Wiring" redox-active polyoxometalates to carbon nanotubes using a sonication-driven periodic functionalization strategy, Energy Environ. Sci., 9, 1095-1101 (2016). 

  23. A. K. Cuentas-Gallegos, M. Lira-Cantu, N. Casan-Pastor, and P. Gomez-Romero, Nanocomposite hybrid molecular materials for application in solid-state electrochemical supercapacitors, Adv. Funct. Mater., 15, 1125-1133 (2005). 

  24. G. M. Suppes, B. A. Deore, and M. S. Freund, Porous conducting polymer/heteropolyoxometalate hybrid material for electrochemical supercapacitor applications, Langmuir, 24, 1064-1069 (2008). 

  25. N. Anwar, M. Vagin, F. Laffir, G. Armstrong, C. Dickinson, and T. McCormac, Transition metal ion-substituted polyoxometalates entrapped in polypyrrole as an electrochemical sensor for hydrogen peroxide, Analyst, 137, 624-630 (2012). 

  26. Q. Cheng, J. Tang, J. Ma, H. Zhang, N. Shinya, and L.-C. Qin, Polyaniline-coated electro-etched carbon fiber cloth electrodes for supercapacitors, J. Phys. Chem. C, 115, 23584-23590 (2011). 

  27. H. Wang and X. Wang, Growing nickel cobaltite nanowires and nanosheets on carbon cloth with different pseudocapacitive performance, ACS Appl. Mater. Interfaces, 5, 6255-6260 (2013). 

  28. G. Bajwa, M. Genovese, and K. Lian, Multilayer polyoxometalates-carbon nanotube composites for electrochemical capacitors, ECS J. Solid State Sci. Technol., 2, M3046-M3050 (2013). 

저자의 다른 논문 :

LOADING...

관련 콘텐츠

오픈액세스(OA) 유형

BRONZE

출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문

이 논문과 함께 이용한 콘텐츠

저작권 관리 안내
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로