최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국생산제조학회지 = Journal of the Korean Society of Manufacturing Technology Engineers, v.25 no.4, 2016년, pp.253 - 257
오성훈 (Dept. of Mechanical Engineering, Graduate School of Seoul National University of Science and Technology) , 이용성 (Center for Energy System Research, Seoul National University of Science and Technology) , 정성균 (Dept. of Mechanical and Automotive Engineering, Seoul National University of Science and Technology)
The effects of re-peening on the compressive residual stress and fatigue life of Al7075-T6 were investigated. The compressive residual stress induced on the surface of components by shot peening is known to increase the fatigue life. However, the fatigue load relaxes the compressive residual stress ...
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
쇼트피닝이란 무엇인가? | 쇼트피닝(shot peening)은 쇼트볼(shot ball)이라 불리는 강구 등을 사용하여 재료의 표면을 강타함으로써, 재료의 표면과 소성변형을 일으켜 표면과 그 직하에 압축잔류응력(compressive residual stress)을 부여하여 피로 강도 및 수명을 비약적으로 향상시키는 표면 가공의 일종이다[1,2]. 피로 수명 향상을 위해 스프링이나 기어 등의 반복 하중을 받는 부품에 다양하게 사용되고 있다. | |
재피닝이란 무엇인가? | 하지만 쇼트피닝 가공으로 부품의 표면 직하에 형성된 압축잔류 응력은 반복적인 피로하중 하에서 완화되며 영구적으로 유지되는 것이 아니다[3]. 반복적인 피로 하중으로 인해 완화된 부품 표면의 압축잔류응력을 회복시키기[4] 위해 추가적인 쇼트피닝 가공을 다시 실시하게 되며 이를 재피닝(re-peening)이라고 한다[5]. 고부가 가치 부품의 수명이 다하기 전에 추가적인 재피닝 공정으로 피로수명을 연장시킴으로써 비용을 절감하고 자원을 효율적으로 사용하는 것을 가능하게 한다. | |
쇼트피닝의 활용 분야는? | 쇼트피닝(shot peening)은 쇼트볼(shot ball)이라 불리는 강구 등을 사용하여 재료의 표면을 강타함으로써, 재료의 표면과 소성변형을 일으켜 표면과 그 직하에 압축잔류응력(compressive residual stress)을 부여하여 피로 강도 및 수명을 비약적으로 향상시키는 표면 가공의 일종이다[1,2]. 피로 수명 향상을 위해 스프링이나 기어 등의 반복 하중을 받는 부품에 다양하게 사용되고 있다. |
Kobayashi, M., Matsui, T., 1998, Mechanism of Creation of Compressive Residual Stress by Shot Peening, International Journal of Fatigue, 20:5 351-357.
Webster, G. A., Ezeilo, A. N., 2001, Residual Stress Distributions and Their Influence on Fatigue Lifetimes, International Journal of Fatigue, 23:1 375-383.
Bergstrom J., Ericsson T., 1984, Relaxation of Shot Peening Induced Compressive Stress During Fatigue of Notched Steel Samples, Proc. of the 2nd International Conference on Shot Peening, 241-248.
Eckersley J. S., 1989, Shot Peening Plays a Vital Roll in rejuvenation of Aging Aircraft, Shot Peening Theory and Application, Institute for Industrial Technology Transfer International, 241-255 France.
Hammond, D. W., Meguid, S. A., 1990, Crack Propagation in the Presence of Shot-peening Residual Stress, Engineering Fracture Mechanics, 37:2 373-387.
ASTM International 2015, Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials, ASTM E 466, USA.
Kim, T. H., Cheong, S. K., Shin, Y. S., 2002, A Study on the Fatigue of Al7075-T6 by Shot Peening, Korea Society of Manufacturing Technology Engineers, Autumn Conference Proceedings, 335-340.
Kim, J. C., Cheong, S. K., Noguchi, H., 2013, Evolution of Residual Stress Redistribution Associated with Localized Surface Microcracking in Shot-peened Medium-Carbon Steel During Fatigue Test, International Journal of Fatigue, 55 147-157.
Wi, J. H., 2008, A Study on the Improvement of Fatigue Characteristics of Al7075 alloy by Re-peening, A Thesis for a Master, Hanyang University, Republic of Korea.
Kang, J. S., 2002, Fatigue Characteristics of Re-peened SM45C Steel, Korea Society of Mechanical Engineering, Spring Conference Proceedings, 208-213.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.