최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국산학기술학회논문지 = Journal of the Korea Academia-Industrial cooperation Society, v.17 no.7, 2016년, pp.641 - 647
주영철 (순천향대학교 기계공학과) , 박상국 (순천향대학교 기계공학과) , 권계시 (순천향대학교 기계공학과)
A drop-on-demand inkjet is used widely for various applications. Therefore, it is important to understand the jetting behavior of the drop from the piezo inkjet. In this study, to predict the jetting behavior, VOF (Volume-of-Fluid) simulation techniques were used and compared with the experimental r...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
피에조 DOD(drop-on-demand) 잉크젯 프린팅 방식을 첨단 산업에 적용하기 위해서 필요한 것은? | 이를 위해서는 잉크 방울을 원하는 위치에 정밀하게 토출시킬 필요가 있다. 주 액적 이외에 위성 액적이 생성 되면 잉크 방울을 제어하는데 많은 어려움이 발생한다. | |
잉크젯 프린팅 기술은 어느분야에서 활용되고 있는가? | 잉크젯 프린팅 기술은 기존의 종이에 출력물을 인쇄하는 용도를 넘어 디스플레이 제조공정, 태양광 전지 제조공정 및 3차원 형상물 제조 등 많은 분야에 활용되고 있다[1-4]. 잉크젯 프린팅 기술에는 여러 가지 방식이 있으나 피에조 DOD(drop-on-demand) 잉크젯 프린팅 방식이 다양한 종류의 잉크를 사용할 수 있기 때문에 첨단산업에 적용이 활발히 연구되고 있다. | |
위성액적의 문제점은? | 주 액적 이외에 위성 액적이 생성 되면 잉크 방울을 제어하는데 많은 어려움이 발생한다. 위성액적은 주변 기류의 영향에 쉽게 반응하여 원하는 위치에 떨어지지 못하여 미세 패턴을 형성하기 어렵게 되고 품질을 떨어뜨리는 결정적인 요인이 된다. 따라서 잉크젯 헤드의 액적 토출 형상에 대한 연구가 필요하다. |
Herman Wijshoff, "The dynamics of the piezo inkjet print head operation," Physics Reports, Vol. 491, pp.77-177, 2010. DOI: http://dx.doi.org/10.1016/j.physrep.2010.03.003
Seogsoon Kim, Dongsoo Kim, Wonhee Lee, Dongyun Shin, Chounghwan Kim, "Ink-jet Printing Technology for Paradigm Shift in Mass Production," Journal of the Korean Society for Precision Engineering, Vol. 23, No. 8, pp.15-21, 2006
J.H. Yoo, Y.W. Park, "Study of Jetting Performance of Magnetostrictive Inkjet Head According to Fluid Properties," Korean Society for Precision Engineering Fall Conference, pp.79-80, 2010.
Wu, H. C., Hwang, W. S. and Lin, H. J., "Development of a Three-Dimensional Simulation System for Micro-Inkjet and Its Experimental Verification," Material Science and Engineering A, Vol. 373, pp.268-278, 2004. DOI: http://dx.doi.org/10.1016/j.msea.2004.01.043
Derby, B. and Reis, N., Inkjet Pringting of Highly Loaded Particulate Suspensions, MRS Bulletin, November, pp.816-818, 2003.
Aran der Bos, Mark-Jan van der Meulen, Theo Driessen, Marc van der Berg, Hans Reinten, Herman Wijshoff, Michel Versluis, and Detlef Lohse, "Velocity profile inside piezoacousitic inkjet droplets in flight: Comparison between experimental and numerical simulation," Physical Review Applied, Vol. 1, 2014.
J.H. Myong, K.S. Kwon, T.J. Um, Y.Ch. Joo, S.W. Lee, "Experimental study of waveform effect on jetting performance," Korean Society for Precision Engineering Fall Conference, pp.273-274, 2008.
Kye-Si Kwon, "Experimental analysis of waveform effects on satellite and ligament behavior via in situ measurement of the drop-on-demand drop formation curve and the instantaneous jetting speed curve," Journal of Micromechanics and Microengineering, Vol. 20, 115005, 2010. DOI: http://dx.doi.org/10.1088/0960-1317/20/11/115005
FLUENT 5 User's Guide, FLUENT inc, 1998.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.