최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. A. A, v.40 no.10, 2016년, pp.879 - 886
이광오 (부산대학교 기계기술연구원) , 심현대 (부산대학교 기계융합기술학과) , 곽효서 (부산대학교 기계융합기술학과) , 김철 (부산대학교 기계기술연구원)
Tractrix dies, used in the deep drawing process, can be used to form CNG pressure vessels without a blank holder. Previous studies had only applied tractrix profiles to perform the first deep drawing process of DDI; but an optimal design of the tractrix die that focuses on improving die life and red...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
D.D.I 공정이란 무엇인가 | I 공정은 Fig. 1(a) ~ (c)와 같이 딥드로잉과 아이어닝 공정이 조합된 한 번의 프레스 행정(Stroke)으로 원통형 용기를 성형하는 공정이다. 1차 성형 단계에서 단동 수직형 프레스와 트랙트릭스 다이를 이용하여 딥드로잉을 수행하며, 2차 성형단계 에서는 수평식 프레스를 이용하여 재드로잉 (Redrawing) 및 두 번의 아이어닝 연속공정이 이루어지고, 3차 성형단계에서 재드로잉과 아이어닝의 연속공정이 이루어진다. | |
고압 가스용기는 어떻게 성형되는가 | 소화기와 LPG등을 저장하기 위한 고압 가스용기는 이음새 없는 튜브(seamless tube)를 사용하여 바닥성형(bottom forming)과 접합(closing)공정, 열간 오목성형 공정(forming to concave bottom)을 통해 성형된다. 이러한 방식은 고가의 재료비와 생산비용을 수반하며, 경량화된 고품질 생산이 어렵다. | |
D.D.I 공정의 공정 과정을 설명하라 | 1(a) ~ (c)와 같이 딥드로잉과 아이어닝 공정이 조합된 한 번의 프레스 행정(Stroke)으로 원통형 용기를 성형하는 공정이다. 1차 성형 단계에서 단동 수직형 프레스와 트랙트릭스 다이를 이용하여 딥드로잉을 수행하며, 2차 성형단계 에서는 수평식 프레스를 이용하여 재드로잉 (Redrawing) 및 두 번의 아이어닝 연속공정이 이루어지고, 3차 성형단계에서 재드로잉과 아이어닝의 연속공정이 이루어진다. 본 논문에서는 Fig. |
Yoon, J. H., Jung, S. Y., Choi, Y., Kim, C. and Choi, J. C., 2002, "A Study on the Development of Computer-Aided Process Planning System for the Deep Drawing & Ironing of High Pressure Gas Cylinder," Journal of KSPE, Vol. 19, No. 2, pp. 177-186.
Kim, E. S., Kim, J. H., Park, Y. S., Kim, C. and Choi, J. C., 2003, "Development of an Automated Design System of CNG Composite Vessel Using Steel Liner Manufactured by D.D.I Process," Journal of KSPE, Vol. 20, No. 1, pp. 205-213.
Park, C. W., Kim, C., Kim, Y. H. and Choi, J. C., 2003, "A Study of Automated Process Planning Using Autofrettage for Large-Sized High Pressure Vessel," Spring Conference Proceeding, KSAE, pp. 167-172.
Narayanasamya, R. and Loganathanb, C., 2005, "Study on Wrinkling Limit of Commercially Pure Aluminium Sheet Metals of Different Grades when Drawn Through Conical and Tractrix Dies," Materials Science and Engineering: A, Vol. 419, No. 1-2, pp. 249-261.
Iliescu, C., 1990, Cold-Pressing Technology, Elsevier Science Publishing Company, INC., p. 281.
NK Co., Ltd, 2001, Process Planning and Die Design for Liner of CNG Cylinder, NK Co., Ltd, pp. 12-41.
Shim, H. B. and Yang, D. Y., 1994, "Elastic-Plastic Finite Element Analysis of Deep Drawings of Circular and Square Cups Considering Bending," Trans. Korean Soc. Mech. Eng. A, Vol. 18, No. 7, pp. 1738-1750.
Choi, J. C., Jung, S. Y. and Kim, C., 2004, "Development of an Automated Design System of a CNG Composite Vessel Using a Steel Liner Manufactured Using the DDI Process," The International Journal of Advanced Manufacturing Technology, Vol. 24, No. 11, pp. 781-788.
Transvalor, 2016, Transvalor Solution-Forge NxT 1.0-Reference Document-Processes Tutorial, Part 5 : Process data, Transvalor, Padova, p. 84.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.