최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Journal of welding and joining = 대한용접·접합학회지, v.34 no.5, 2016년, pp.77 - 82
한일욱 (포스코 고Mn강 특화 솔루션 프로젝트 팀) , 엄정복 (부산대학교 수송기기하이테크 소재부품전공학과) , 윤중길 (부산대학교 재료공학부) , 이봉근 (포스코 고Mn강 특화 솔루션 프로젝트 팀) , 강정윤 (부산대학교 재료공학부)
In this study, Microstructure and hardness of 1st layer with crystallographic orientation were investigated about solidification structure in multipass weld using high Mn-Ni flux cored wire. Microstructure of solidification consisted of austenite matrix and a little
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
액화된 가스의 수송 및 저장용 탱크 제조에 사용되는 소재는 어떤 특성이 요구되는가? | 액화된 가스의 수송 및 저장용 탱크 제조에 사용되는 소재는 극저온 인성이 높고, 열팽창 계수가 작아야 한다. 따라서 탱크에 현재 사용되는 소재는 9%Ni강, 오스테나이트 스테인리스강, 알루미늄, Invar합금 등이 사용되고 있다4). | |
액화된 가스의 수송 및 저장용 탱크의 소재는? | 액화된 가스의 수송 및 저장용 탱크 제조에 사용되는 소재는 극저온 인성이 높고, 열팽창 계수가 작아야 한다. 따라서 탱크에 현재 사용되는 소재는 9%Ni강, 오스테나이트 스테인리스강, 알루미늄, Invar합금 등이 사용되고 있다4). 하지만 이들 소재는 가격이 비싼 단점이 있다. | |
2040년에는 석유에 이어 두 번째로 사용량이 많은 에너지 자원으로 예상되는 에너지는? | 최근 중국, 인도, 브라질 등의 인구 증가와 경제 성장으로 인하여 에너지 수요가 증가하고, 그에 따라 환경 문제가 대두될 것으로 예상된다. 따라서 청정에너지인 천연가스(LNG)와 셰일 가스가 주목을 받고 있으며 천연가스와 셰일가스의 꾸준한 수요 증가로 2040년에는 석유에 이어 두 번째로 사용량이 많은 에너지 자원이 될 전망이다1,2). |
ExxonMobil, The Outlook for Energy: A View to 2040, (2012)
International Energy Agency, Golden Rules for a Golden Age of Gas - World Energy Outlook, (2012)
KOTZOT, Heinz J. Overview of the LNG Industry Seminar: Gas Treatment, Liquefaction, and Storage, (2003)
ASM Handbook (6) (1993), 1016-1019
Hye-Jeong Shim, Trade Focus, IIT, 13 (62) (2014)
J.K. Choi, High Manganese Austenitic Steel for Cryogenic Applications, ISOPE, 4 (2012) 29-35
AA Saleh, Texture evolution of cold rolled and annealed Fe-24Mn-3Al-2Si-1Ni-0.06 C TWIP steel, MAT SCI ENG A, 528 (2011) 4537-4549
DB Santos, Effect of annealing on the microstructure and mechanical properties of cold rolled Fe-24Mn-3Al-2Si-1Ni-0.06 C TWIP steel, MAT SCI ENG A, 528 (2011) 3545-3555
AA Gazder, Microtexture analysis of cold-rolled and annealed twinning-induced plasticity steel, Scripta Mater. 65 (2011) 560-563
L.M. Roncery, Welding of twinning-induced plasticity steels, Scripta Mater. 66 (2012) 997-1001
Y. Tomota, Microstructural dependence of Fe-high Mn tensile behavior, Metall. Mater. Trans. A, 17 (1986) 537-547
Y. Tomota, The relationship between toughness and microstructure in Fe-high Mn binary alloys, Metall. Mater. Trans. A, 18 (1987) 1073-1081
Bo-Young Jeong, Characteristics of Dissimilar CO2 Laser Welding for High Mn Steel and Low Carbon Steel, Journal of KWJS, 28 (2) (2010) 36-41 (in Korean)
P. Yang, Dependence of deformation twinning on grain orientation in a high manganese steel, Scripta Mater. 55 (2006) 629-631
L. Meng, Dependence of deformation twinning on grain orientation in compressed high manganese steels, Scripta Mater. 56 (2007) 931-934
Singon Kang, Orientation-dependent indentation modulus and yielding in a high Mn twinning-induced plasticity steel, MAT SCI ENG A, 532 (2012) 500-504
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.