최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국표면공학회지 = Journal of the Korean institute of surface engineering, v.49 no.5, 2016년, pp.472 - 476
구진희 (한국해양대학교 기계공학부) , 이병우 (한국해양대학교 기계공학부)
The nano-array of the vertically aligned rod-like particles grown on ZnO coated glass-substrates was obtained via hydrothermal process. ZnO thin film coatings were prepared on the glass substrates using a MOD (metallorganic deposition) dip-coating method with zinc chloride dihydrate as starting mate...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
ZnO이란? | ZnO은 hexagonal wurtzite 구조를 가지며 자외선에 해당하는 3.37 eV의 넓은 에너지 밴드 갭(Eg)을 가지는 직접천이형 화합물 반도체로 높은 효율의 광화학 소자로의 응용이 기대되고 있다[1-4]. 또한 뛰어난 압전 및 열전 특성, 높은 생체안정성과 낮은 제조비용 등으로 가스센서, 에너지 하비스팅 재료, 자외선차단제 및 다양한 생체소재 등으로 기대를 모으고 있는 소재이다[2-4]. | |
metal organic decomposition법의 장점은? | 유리 기판 상에 ZnO seed 층을 형성시키는 방법으로 MOD(metal organic decomposition)법을 이용하였다. MOD법은 습식화학적 박막 제조 중 하나로 장치와 공정이 비교적 간단하고 제조비용 역시 다른 제조방법에 비해 상대적으로 저렴하다. MOD법은 sol-gel법과 유기금속화합물을 원료로 사용할 수 있다는 점에서는 유사하지만 분자량이 큰 소수성(hydrophobic) 2-ethylhexanol 등을 용매로 사용하여, sol-gel법의 수화반응을 동반한 중합반응을 이용하지 않아 원료 용액의 수분 안정성이 증가하며, 코팅 후 건조 시 박막의 수축이 기판과 평행하게 일어나 균열 없는 균일한 박막을 쉽게 얻을 수 있는 장점이 있다[14]. | |
ZnO 나노구조물의 제조시 용액법을 사용할 때 장점은? | ZnO 나노구조물의 제조에는 다양한 방법들이 보고되어 있으나 본 연구와 같은 용액법을 이용할 경우 공정비용이 낮고, 공정크기를 확장하기 쉽고, 공정이 좀 더 단순하다는 장점과 비교적 저온에서 성장이 가능하고 공정변수의 조절을 통해 구조제어가 쉬운 장점을 이용할 수 있다[3,7,8,10-12]. 본 연구에서는 ZnO 나노구조물을 손쉽게 합성할 수 있는 수용액 합성법중 하나인 수열합성법(hydrothermal proCess)을 이용하여 배향성을 가지는 ZnO 나노구조물을 얻고자 하였으며, ZnO 나노구조물을 효과적으로 합성할 수 있는 합성조건을 제시하고자 하였다. |
V. Srikant, D. R. Clarke, On the optical band gap of zinc oxide, J. Appl. Phys. 83 (1998) 5447-5451.
D. C. Look, Recent advances in ZnO materials and devices, Mater. Sci. Eng. B 80 (2001) 383-387.
A. Kolodziejczak-Radzimska, T. Jesionowski, Zinc oxide from synthesis to application: A review, Materials 7 (2014) 2833-2881.
A. Janotti. C. G. Van de Walle, Fundamentals of zinc oxide as a semiconductor, Rep. Prog. Phys. 72 (2009) 126501-529.
Z. L. Wang, Zinc oxide nanostructures: growth, properties and applications, J. Phys.: Condens. Matter 16 (2004) R829-R858.
X. Wang, Y. Ding, C. J. Summers, Z. L. Wang, Large-scale synthesis of six-nanometer-wide ZnO nanobelts, J. Phys. Chem. B 108 (2004) 8773-8777.
S. Xu, Z. L. Wang, One-dimensional ZnO nanostructures: solution growth and functional properties, Nano Res. 4 (2011) 1013-1098.
A. Pawar, S. Dhobale, R. G. Pardeshi, K. M. Sonawane, Growth of ZnO nanorods using hydrothermal for gas sensing application, Res. J. Physical Sci. 3 (2015) 1-3.
Q. Zhang, C. S. Dandeneau, X. Zhou, G. Cao, ZnO nanostructures for dye-sensitized solar cells, Adv. Mater. 21 (2009) 4087-4108.
K. Nejati, Z. Rezvani, R. Pakizevand, Synthesis of ZnO nanoparticles and investigation of the ionic template effect on their size and shape, Int. Nano Lett. 1 (2011) 75-81.
K. Byrappa, M. Yoshimura, Handbook of Hydrothermal Technology, Noyes Publications/William Andrew Publishing LLC (2001) 1.
W. L. Suchanek, R. E. Riman, Hydrothermal synthesis of advanced ceramic powders, Adv. Sci. Tech. 45 (2006) 184-193.
A. Bramantyo, R. Poespawatii, M. Kenji, Optimization of ZnO seed layer for growth of vertically aligned ZnO nanorods on glass surface, JJAP Conf. Proc. (2016) 0111031-0111036.
J. B. Wachtman, R. A. Haber, Ceramic Films and Coating, Edited by Noyes Pub., Park Ridge, NJ (1992) 224.
W. Stumm, J. Morgan, Aquatic Chemistry, Wiley-Interscience, New York (1995) 1002.
S. Yamabi, H. Imai, Growth conditions for wurtzite zinc oxide films in aqueous solutions, J. Mater. Chem. 12 (2002) 3773-3778.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.