최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기시설원예ㆍ식물공장 = Protected horticulture and plant factory, v.25 no.3, 2016년, pp.193 - 199
최만권 (농촌진흥청 국립원예특작과학원 시설원예연구소) , 송호성 (농촌진흥청 국립농업과학원 농업공학부) , 조명환 (농촌진흥청 국립원예특작과학원 시설원예연구소) , 유인호 (농촌진흥청 국립원예특작과학원 시설원예연구소) , 신영안 (농촌진흥청 국립원예특작과학원 시설원예연구소) , 임성윤 (농촌진흥청 국립농업과학원 농업공학부) , 류희룡 (농촌진흥청 국립원예특작과학원 시설원예연구소)
The research discussed experimental results on slip resistance force of rafter-purlin connection of plastic greenhouse and suggested a test method for evaluating slip resistance performance of the connection. Slip resistance forces were measured by four kinds of constraint conditions for specimens, ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
2014년 개정 전 내재해형 규격서의 내재해형 죔쇠 안전 기준의 문제점은? | 이러한 죔쇠의 중요성으로 인하여 농림축산식품부와 농촌진흥청은 원예특작시설 내재해형 규격 설계도·시방서 고시(이하, 내재해형 규격서)에 내재해형 죔쇠의 안전 기준을 신설하였다(MAF & RDA, 2007). 그러나 죔쇠의 결속력에 대한 최소한의 안전 기준만 있을 뿐 시험 방법에 대한 기준이 없어 유통중이거나 개발 중인 죔쇠의 적합여부를 판단하기에는 어려움이 있었다. 그 후 2014년 내재해형 규격서의 개정시 내재해형 죔쇠의 강도기준 외에 시험방법을 추가함으로써 죔쇠의 품질관리 강화를 위한 방안을 마련하였다(MAFRA & RDA, 2014). | |
죔쇠는 어떤 부품인가? | 연동형이나 광폭형 플라스틱 온실의 경우 기둥과 중방에서 외력에 대한 하중을 상당 부분 부담하고 있지만 기본적으로 서까래와 도리의 결속이 없다면 전체 구조물은 그 외형을 유지할 수 없다. 서까래와 도리의 교차 결속부가 느슨해지거나 뒤틀리지 않게 직각을 유지하며 결속함으로써, 플라스틱 온실의 구조적인 강성을 유지할 수 있도록 해주는 부품을 죔쇠라 한다. 이는 조립에 의해 초기결속력이 도입되며 그에 따라 발생하는 서까래-도리 부재간의 압축력에 의해 바람과 눈 등의 외력에 저항하게된다. | |
플라스틱 온실 시공에서 죔쇠의 성능에 대한 평가나 품질의 균일화를 위한 노력이 많지 않은 이유는? | 그 후 2014년 내재해형 규격서의 개정시 내재해형 죔쇠의 강도기준 외에 시험방법을 추가함으로써 죔쇠의 품질관리 강화를 위한 방안을 마련하였다(MAFRA & RDA, 2014). 그러나 플라스틱 온실 시공에서 죔쇠는 그 개수가 보통 수 백 개 이상이어서 작업시간과 비용 문제 때문에 농업인이나 생산업체에서는 주로시공의 용이성이나 경제성에 초점을 맞추고 있으며, 죔쇠의 성능에 대한 평가나 품질의 균일화 등에 대한 노력은 많지 않은 실정이다. |
Choi, M.K., H.R., Ryu, M.W., Cho, I.H., Yu, and Y.A. Shin. 2016. Evaluation of optimum constraint condition to measurement of slip resistance force of rafter-purlin clamp. Proceeding of Korean Society for Bio-Environment Control Conference. 25(Supplement 1):196-170(in Korean).
Gutierrez, R., A. Loureiro, M. Lopez, and A. Moreno. 2011. Analysis of cold-formed purlins with slotted sleeve connections. Thin-Walled Structure 49(7):833-841.
Iannone, F., M. Latour, V. Piluso, and G. Rizzano. 2011. Experimental analysis of bolted steel beam-to-column connections: Component identification. J. Earthquake Engineering. 15(2):214-244.
Liu, H., L. Jia, S. Wen, Q. Liu, G. Wang, and Z. Chen. 2016. Experimental and theoretical studies on the stability of steel tube-coupler scaffolds with different connection joints. Engineering Structures. 106:50-95.
Ministry of Agriculture and Forestry(MAF) and Rural Development Administration(RDA). 2007. Disaster-proof Design Drawing and Specifications for Horticultural and Herbal Facilities. ed, Gwacheon and Suwon, Korea(in Korean).
Ministry of Agriculture, Food and Rural Affairs(MAFRA) and Rural Development Administration(RDA). 2014. Disasterproof Design Drawing and Specifications for Horticultural and Herbal Facilities. ed, Sejong and Jeonju, Korea(in Korean).
Ogawa, H., I. Tsuge, Y. Sato, S. Hoshiba, and S. Yamashita. 1990. Experimental analysis on strength of pipe-houses with ground anchoring(II). SASJ. 20(3):262-269.
Ryu, H.R., D.G. Moon, I.H. Yu and M.W.Cho. 2014. Structural improvement of freestanding greenhouse for meteorological disasters response. The final report of cooperative research program for agriculture science & technology development. Rural Development Administration(RDA), Jeonju, Korea(in Korean).
※ AI-Helper는 부적절한 답변을 할 수 있습니다.