최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국구조물진단유지관리공학회 논문집 = Journal of the Korea Institute for Structural Maintenance and Inspection, v.20 no.6, 2016년, pp.40 - 45
이현진 (안동대학교 토목공학과) , 배수호 (안동대학교 토목공학과) , 권순오 (안동대학교 토목공학과) , 김성욱 (한국건설기술연구원 구조융합연구소) , 박정준 (한국건설기술연구원 구조융합연구소)
It should be noted that the use of the lathe scrap for making fiber reinforced cementitious composites raised friendly environmental effect as well as economy because the lathe scrap is a by-product of steel manefactures and is occurred when lathe and milling works of them are conducted to process s...
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
콘크리트의 단점은? | , 2015). 이같이 콘크리트는 가장 기본적이며 중요한 건설재료로 사용되고 있으나, 높은 압축강도와는 달리 낮은 인장강도와 전단강도 및 휨강도를 가지며 균열에 대한 저항 능력이 작아, 갑작스런 파괴를 일으키는 취성파괴(brittle failure)의 문제를 가지고 있으며, 이는 고강도 콘크리트 일수록 두드러지게 나타난다(Bae et al., 2014; Kim et al. | |
LSRCCs의 작업성, 압축강도 및 휨강도를 평가한 결과는 어떠한가? | 1) LSRCCs의 작업성은 플레인 모르타르보다 다소 저하되나, 목표 플로값을 만족시키는 것으로 나타나, 작업성은대체적으로 양호한 것으로 나타났으며, 물-결합재비가 클수록 작업성은 개선되는 것으로 나타났다. 2) LSRCCs의 재령 28일 압축강도는 선반 스크랩의 종류에 관계 없이 플레인 모르타르보다 다소 증진되는 것으로 나타났으며, 물-결합재비가 30%인 경우, 선반 스크랩 종류에 따른 LSRCCs의 압축강도는 A, B, C 각각의 경우 플레인 모르타르의 1.09배, 1.14배, 1.16배, 물-결합재비가 40%인 경우, A, B, C 각각의 경우 플레인 모르타르의 1.02배, 1.11배, 1.15배로 나타나, 선반 스크랩의 종류가 LSRCCs 의 압축강도에 다소 영향을 미치며, 스크랩 모재의 인장강도가 클수록 LSRCCs의 압축강도도 증가하는 것으로 나타났다. 3) LSRCCs의 재령 28일 휨강도는 선반 스크랩의 종류에 관계 없이 플레인 모르타르보다 크게 증진되는 것으로 나타났으며, 물-결합재비가 30%인 경우, 선반 스크랩 종류에 따른 LSRCCs의 휨강도는 A, B, C 각각의 경우 플레인 모르타르의 1.49배, 2.05배, 2.28배, 물-결합재비가 40%인 경우, A, B, C 각각의 경우 플레인 모르타르의 1.84배, 2.31배, 2.55배로 나타나, 선반 스크랩의 종류가 LSRCCs의 휨강도에 크게 영향을 미치며, 스크랩 모재의 인장강도가 클수록 LSRCCs의 휨강도도 크게 증가하는 것으로 나타났다. |
Bdour, A. N., and Al-Khalayleh, Y. A. (2010), Innovative application of scrap-tire steel cords in concrete mixes. Jordan Journal of Civil Engineering, 4(1), 55-61.
Granju, J. L., and Balouch, S. U. (2005), Corrosion of steel fiber reinforced concrete from the crack. Cement and Concrete Research, 35, 572-577.
Im, N. K., and Jung, S. J. (1999), The Experimental Study on Strength Property on concrete using Blast Furnace Slag Aggregate. Journal of Architectural Institute of Korea, 15(6), 87-94.
Jeon, J. K., Kim, S. G., Jeon, C. K., and Kim, K. H. (2015), Flexural Performance Evaluation of Organic Fiber Reinforced Concrete for Performance Improvement of Blast Resistance. Proceedings of Korea Concrete Institute, 27(1), 437-438.
Kim, B. S., Kim, D. H., Lee, Y. D., and Lim, N. H. (2013), The Mechanical and Chloride Penetration Properties of Concrete Mixed with Various Fiber. Journal of the Architectural Institute of Korea Structure & Construction, 29(11), 45-52.
KS D 2101 (2011), Classification standard for iron and steel scraps, Korean Agency for Technology and Standard.
KS L 5105 (2012), Testing method for compressive strength of hydraulic cement mortars, Korean Agency for Technology and Standard.
KS L ISO 679 (2006), Methods of testing cements-Determination of strength, Korean Agency for Technology and Standard.
Mangat, P. S., and Gurusamy, K. (1987), Long-term properties of steel fiber reinforced marine concrete. Materials and Structures, 20, 273-782.
Murali, G., Vivek Vardhan, C. M., Prabu, R., Mohammed Sadaquath Ali Khan, Z., Aarif Mohamed, T., and Suresh, T. (2010), Experimental investigation on fibre reinforced concrete using waste materials. International Journal of Engineering Research and Applications, 2(2), 278-283.
Sim, J. S., and Lee, C. D. (1996), Mechanical Properties and Research Trends in Structural Application of Steel Fiber Reinforced Concrete. Magazine of the Korea Concrete Institute, 8(4), 28-38.
Vijayakumar, G., Senthilnathan, P., Pandurangan, K., and Ramakrishna, G. (2012), Impact and energy absorption characteristics of lathe scrap reinforced concrete. International Journal of Structural and Civil Engineering Research, 1(1), 1-6.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.