최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국자동차공학회논문집 = Transactions of the Korean Society of Automotive Engineers, v.24 no.6, 2016년, pp.709 - 715
권종호 (신한대학교 자동차공학과) , 김장훈 (에스톡 컨설팅그룹) , 이용우 (에스톡 컨설팅그룹)
This paper presents a comparison of an experimental study on spot and plug welding of an automotive body panel. Spot welding is a common joining technology used in automotive body panel assembly. In automotive body repair, however, plug welding is widely used due to its technical simplicity and cost...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
J. H. Han, S. M. Yang, H. S. Yu and T. J. Kim,"Optimal Condition for Spot Weldment of Dissimilar Steel Sheet in Automotive," Transactions of KSAE, Vol.18, No.4, pp.68-73, 2010.
J. H. Song, H. Huh, H. G. Kim and S. H. Kim, "Evaluation of the Finite Element Modeling of Spot-welded Region for Crash Analysis," Transactions of KSAE, Vol.14, No.2, pp.1-8, 2006.
Automobile Body Repair, Human Resources Development Service of Korea, 2015.
J. W. Ha, Dynamic Material Properties of the Heat-affected Zone(HAZ) in a Resistance Spot Weld, M. S. Thesis, Korea Advanced Institute of Science and Technology, Daejeon, Korea, 2008.
K. M. Lee, J. S. Kim and B. Y. Lee, "A Study on the Arc Position which Influence on Quality of Plug Welding in the Vehicle Body," The Korean Welding & Joining Society, Vol.30, No.3, pp.264-268, 2012.
M. Pouranvari, H. R. Asgari, S. M. Mosavizadch, P. H. Marashi and M. Goodarzi, "Effect of Weld Nugget Size on Overload Failure Mode of Resistance Spot Weld," Science and Technology of Welding & Joining, Vol.12, No.3, pp.217-225, 2007.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.