최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. B. B, v.41 no.1 = no.376, 2017년, pp.21 - 28
Indirect evaporative cooling, which utilizes a cooling effect obtained by the evaporation of water, is energy-effective compared to the conventional vapor compression method. It is also eco-friendly, due to the non-usage of CFC refrigerant. In this study, three indirect evaporative cooler samples of...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
직접냉각방식이란? | (1~5) 증발냉각방식은 직접냉각방식과 간접냉각방식으로 대별된다. 직접냉각방식은 물과 직접 접촉을 통하여 공기를 냉각시키는 방법으로 냉각 시 공기 중의 수분량도 증가한다. 간접냉각방식은 냉각 채널(건채널)과 물이 증발하는 채널(습채널)을 구분하여 냉각 시 수분량의 변화가 없다. | |
간접증발효율이 채널 핏치가 가장 작은 5mm x 5mm 소자에서 가장 크게 나타난 이유는? | 간접증발효율은 채널 핏치가 가장 작은 $5mm{\times}5mm$ 소자의 가장 크게 나타났다. 이는 작은 $5mm{\times}5mm$ 소자의 전열 면적이 가장 크기 때문이다. 또한 간접증발소자 설치로 인해 절약되는 에너지도 $5mm{\times}5mm$ 소자에서 가장 크게 나타났다. | |
증발냉각방식의 장점은? | 물의 증발에 따른 냉각 효과를 이용하는 증발냉각방식은 기존 증기 압축식 방식에 비하여 냉방에 소요되는 에너지를 현저히 감소시킬 수 있고 CFC 냉매를 사용하지 않아 친환경적이다. 본 연구에서는 습채널의 물 퍼짐성이 개선된 플라스틱/종이 재질로 크기 $300mm{\times}300mm{\times}300mm$, 채널 핏치 $5mm{\times}5mm$, $5mm{\times}7mm$, $7mm{\times}7mm$의 직교류 간접증발소자를 제작하고 간접증발효율 및 압력 손실을 측정하였다. |
Duan, Z., Zhan, C., Zhang, X., Mustafa, M. Zhao, X., Alimohammadisgvand, B. and Hasan, A., 2012, "Indirect Evaporative Cooling: Past, Present and Future Potentials," Renew. Sustain. Energy Rev., Vol. 16, pp. 6823-6850.
Jaber, S. and Ajib, S., 2011, "Evaporative Cooling as an Efficient System in Mediterranean Region," Appl. Therm. Eng., Vol. 31, pp. 2590-2596.
Caliskan, H., Dincer, I. and Hepbasil, A., 2012, "Exergoeconomic Enviroecomomic and Sustainability Analyses of a Novel Air Cooler," Energy Build., Vol. 55, pp. 747-756.
Costello, B. and Finn, D., 2007, "Thermal Effectiveness Characteristics of Low Approach Indirect Evaporative Cooling Systems in Buildings," Energy Build., Vol. 39, pp. 1235-1243.
Maheshwari, G. P., Al-Ragom, F. and Suri, R. K., 2001, "Energy Saving Potential of an Indirect Evaporative Cooler," Appl. Energy, Vol. 69, pp. 69-76.
Santamouris, M. and Kolokotsa, D., 2013, "Passive Cooling Dissipation Techniques for Buildings and Other Structures: the State of the Art," Energy Build., Vol. 57, pp. 74-94.
Watt, J. D. and Brown, W. K., 1997, Evaporative Air Conditioning Handbook, 3rd ed., The Fairmont Press Inc.
Pescod, D., 1979, "A Heat Exchanger for Energy Saving in an Air Conditioning Plant," ASHRAE Trans., Vol. 85., Pt. 2, pp. 238-251.
Maclaine-Cross, I. L. and Banks, P. J., 1981, "A General Theory of Wet Surface Heat Exchangers and Its Application to Regenerative Cooling," J. Heat Transfer, Vol. 103, pp. 578-585.
Kettleborough, C. F. and Hsieh, C. S., 1983, "The Thermal Performance of the Wet Surface Plastic Plate Heat Exchanger Used in an Indirect Evaporative Cooler," J. Heat Transfer, Vol. 105, pp. 366-373.
Tejero-Gonzalez, A., Andres-Chicote, M., Velasco - Gomez, E. and Rey-Martinez, F. J., 2013, "Influence of Constructive Parameters on the Performance of Two Indirect Evaporative Cooler Prototypes," Appl. Therm. Eng., Vol, 51, pp. 1017-1025.
Parker, R. O. and Treybal, R. E., 1962, "The Heat Mass Transfer Characteristics of Evaporative Coolers," Chem. Eng. Prog. Symp. Ser. Vol 57, No. 32, pp. 138-149.
Hasan, A. and Siren, K., 2003, "Performance Investigation of Plain and Finned Tube Evaporatively Cooled Heat Exchangers," Appl. Therm. Eng., Vol. 23, No. 3, pp. 325-340.
Zalewski, W. and Gryglaszewski, P. A., 1977, "Mathematical Model of Heat and Mass Transfer Processes in Evaporative Coolers," Chem. Eng. Process, Vol. 36, No. 4, pp. 271-280.
Ren, C. and Yang, H., 2006, "An Analytical Model for the Heat and Mass Transfer Processes in Indirect Evaporative Cooling with Parallel/Counter Flow Configurations," Int. J. Heat Mass Transfer, Vol. 49, pp. 617-627.
Hasan, A., 2012, "Going Below the Wet-Bulb Temperature by Indirect Evaporative Cooling: Analysis Using a Modified $\varepsilon$ -NTU Method," Appl. Energy, Vol. 89, pp. 237-245.
Cui, X., Chua, K. J., Islam, M. R. and Yang, W. M., 2014, "Fundamental Formulation of a Modified LMTD Method to Study Indirect Evaporative Heat Exchangers," Energy Conservation Management, Vol. 88, pp. 372-381.
Chen, Y., Yang, H. and Luo, Y., 2016, "Indirect Evaporative Cooler Considering Condensation from Primary Air; Model Development and Parameter Analysis," Build. Env., Vol. 95, pp. 330-345.
Riangvilaikul, B. and Kumar, S., 2010, "An Experimental Study of a Novel Dew Point Evaporative Cooling System," Energy Build., Vol. 42, pp. 637-644.
Zhao, X., Liu, S. and Riffat, S. B., 2008, "Comparative Study of Heat and Mass Exchanging Materials for Indirect Evaporative Cooling Systems," Build. Environ., Vol. 43, No. 11, pp. 1902-1911.
KS M 896, 2013, Paper and Plate - Measurement of Water Absorption Rate in Water.
ASHRAE Standard 41.1, 1986, Standard Method for Temperature Measurement, ASHRAE.
ASHRAE Standard 41.2, Standard Method for Laboratory Air-Flow Measurement, ASHRAE.
KS C 9306, 2010, Air Conditioner, Korean Standard Association.
Kim, N.-H., 2016, "Heat and Moisture Transfer in a Counter Flow Regenerative Evaporative Cooler Made of Plastic Film/Paper Composite," J. Mech Sci. Tech., Vo. 30, pp. 1449-1457.
ASHRAE Standard 143, 2007, Method of Test for Rating Indirect Evaporative Coolers, ASHRAE.
Klein, S. J. and McClintock, F. A., 1953, "The Description of Uncertainties in a Single Sample Experiments," Mech. Eng. Vol. 75, pp. 3-9.
Mills, A. F., 1995, Basic Heat and Mass Transfer, Irwin Pub.
Shah, R. K. and London, A. L., 1978, Laminar Flow Forced Convection in a Duct, Academic Pub.
Johnson, J. E., 1997, Heat and Mass Transfer Between Two Fluid Streams Separated by a Thin, Permeable Barrier, Ph.D. Thesis, University of Minnesota, Department of Mechanical Eng.
Kays, W. M. and London, A. L., 1984, Compact Heat Exchangers, McGraw-Hill Pub..
Personal communication with Samhwa Ace Co., 2016.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.