최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국가스학회지 = Journal of the Korean institute of gas, v.21 no.1, 2017년, pp.18 - 26
한순우 (한국원자력연구원 원자력융합기술개발부) , 서정석 (한국원자력연구원 원자력융합기술개발부) , 박진호 (한국원자력연구원 원자력융합기술개발부)
This work proposes an alternative pipe wall-thinning inspection method based on change of eigenfrequencies of shell vibration modes in wall-thinned pipes. It takes much time to detect wall-thinning of pipes using ultrasonic thickness gauge and only a limited number of pipes are under regular inspect...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
상용 초음파 두께 측정기를 이용하여 감육을 검사하는 방법의 한계점은 무엇인가? | 현재는 상용 초음파 두께 측정기를 이용하여 검사 부위 여러 지점의 두께를 측정하여 감육을 검사하는 방법을 많이 사용하고 있다[3,4]. 이 방법은 두께를 정확히 측정할 수 있으나, 한 지점만의 두께를 측정하기 때문에 감육 검사에 많은 시간이 소요된다. 따라서 사전에 감육 발생 가능성이 높다고 판단된 일부 배관에 대해서만 감육 검사를 수행하고 있어[5,6], 검사 대상이 아닌 배관의 감육 발생 여부는 파악이 어렵다. | |
감육현상이란 무엇인가? | 배관 내부의 유체 흐름에 따라 배관의 두께가 감소하는 감육(wall-thinning) 현상은 조기에 발견하여 대처하지 않으면 배관의 파손은 물론, 시설 전체의 안전에 악영향을 미칠 수 있어 구조 건전성의 중요 검사 항목 중 하나로 설정되어 있다[1,2]. | |
굽힘 모드가 검사부의 두께 변화에 의해 어떤 고유 진동수가 변화했는지 찾기 어려운 이유는 무엇인가? | 배관 단면의 강성 변화는 모든 모드의 고유 진동수에 영향을 준다. 그러나 굽힘 모드는 배관 단면의 변화보다는 배관 길이에 큰 영향을 받으며, 수많은 모드가 존재하기 때문에 검사부의 두께 변화에 의해 어떤 고유 진동수가 변화했는지 찾기 어렵다. 비틀림 모드는 배관 두께에 관계된 비틀림 강성의 영향을 받지만, 모드 별 변형 형상에 의한 배관 표면 변위가 원주 방향으로 발생하므로 범용 센서로는 측정이 쉽지 않다[9]. |
Wu, P. C., Erosion/Corrosion-Induced Pipe Wall Thinning in US Nuclear Power Plants, US Nuclear Regulatory Commission, Washington, (1998)
Song, K. H., Lee, S. M., Chang, Y. S., Choi, J. B., and Kim, Y. J., "Estimation of Local Stress Change of Wall-Thinned Pipes due to Fluid Flow," KIGAS, 10(3), 7-12, (2006)
Nishiguchi, I., Inada, F., Takahashi, M, Ogawa, B., Inagaki, T, Ohira, T, Iwahara, K., and Yamakami, K., "A Review: Japanese pipe wall thinning management based on JSME rules and recent R&D studies performed to enhance the rules", E-Journal of Advanced Maintenance, 2, 14-24, (2011)
Knook, T., Persoz, M., Trevin, S.,Friol, S., Moutrille, M. -P., and Dejoux, L., "Pipe wall thinning management at Electricite de France (EDF)," E-Journal of Advanced Maintenance, 2, 1-13, (2011)
Schefski, C., Pietralik, J., Hazelton, T., and Bitonte, V., "CHECWORKS - Integrated Software for Corrosion Control", Proceedings of 4th International Conference on CANDU Maintenance, 82-87, (1997)
Baier, R. and Zander, A., "COMSY-A software tool for aging and plant life management with an integrated documentation tool", Proceedings of IYNC 2008, 246.1-246.9,(2008)
Olson, D. E., Companion Guide to the ASME Boiler and Pressure Vessel Code - Chapter 37. Pipe Vibration Testing and Analysis, ASME, 1-37, (2008)
Janssens, K. and Britte, L., "Comparison of torsional vibration measurement techniques", Proceedings of ISMA2012-USD2012, 1447-1461, (2012)
Blevins, R. D., Formulas for Natural Frequency and Mode Shape, 3rd ed., Krieger Pub. Co., Malabar, (2001)
COMSOL Structural Mechanics Module User's Guide, (2015)
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.