최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국산업융합학회 논문집 = Journal of the Korean Society of Industry Convergence, v.20 no.1, 2017년, pp.34 - 48
조상영 (경남대학교 대학원) , 김민성 (경남대학교 대학원) , 도기훈 (경남대학교 대학원) , 한성현 (경남대학교 기계공학부) , 하언태 (경남대학교 대학원) , 심현섭 (경남대학교 대학원) , 임창식 (경남대학교 산업경영대학원 기계공학과)
This study proposes a new approach to control a trajectory control of vertical type articulated robot arm with six revolution joints by computed torque method for manufacturing process automation. The proposed control scheme takes advantage of the properties of the fuzzy controllers. The proposed me...
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
퍼지 추론이란? | 퍼지 추론(fuzzy inference)이라는 것은 어떤 주어진 사실이나 관계로부터 새로운 관계나 사실을 유추해 나가는 일련의 과정이라고 정의를 하며 즉 “IF x is A THEN y is B”(A, B는 퍼지 집합이다)가 되는 함의와 퍼지제어 규칙에 있어서 “x is A”라는 입력과 그 입력에 대해서 “y를 어떻게 구할 수 있을까?” 하는 것을 다루는 과정을 의미한다. 여기서 규칙이라는 말은 어떤 사실들의 관계를 나타내며, 사실이라는 말은 현재의 어떠한 상태를 나타내는 말이다. | |
로봇의 모션제어방법에서 작업 환경에 따라 동력 파라미터 값이 변화하는 이유? | 일반적으로 로봇의 모션제어방법에서 로봇 매니퓰레이터의 동력 파라미터 및 동력특성을 정확히 알 수 있는 경우에는 선형시 불변PID제어방식 혹은 사용하여 정밀한 작업경로 제어가 가능하다. 그러나 현실적으로 운동방정식을 정확히 얻기 어렵고 또한 부하가 번번이 변화함에 따라 로봇의 동력 파라미터 값이 작업환경에 따라 변화하게 된다. 이를 보상하기 위해 본 연구에서 퍼지제어 기법을 이용한 계산 토크 제어기를 구성하는 로봇 제어기를 제안한다. | |
비례-미분 제어기의 단점? | 이를 보상하기 위해 본 연구에서 퍼지제어 기법을 이용한 계산 토크 제어기를 구성하는 로봇 제어기를 제안한다. 최근 비례-미분 타입 퍼지 계산토크 제어기에 관한 연구가 있었으나 비례-미분 제어기는 외란 존재 시 시스템의 정상상태 오차를 제어하기 어렵다. 이에 적분 기능을 가진 제어기를 구성함으로써 간접적으로 보상 할 수 있다. |
D. B. Westmore and W. J. Wilson, "Direct Dynamic Control of a Robot Using and End-Point Mounted Camera and Kalman Filter Position Estimation", Proc. IEEE Int. Conf. Robotics and Automation, pp. 2376-2384, (1991).
류창렬, 채창현, 김상희, 임재춘, "간편 간접추론 퍼지 PID 제어기를 이용한 $2{\times}2$ 상호 결합 공정제어," 제 14회 자동제어학술회의 논문집, (1999).
F. L. Lewis, C. T. Abdallah, and D. M. Dawson, Control of Robot Manipulators, Macmillan Publishing Company, (1993).
T.C. Hasi, "Adaptive Control Scheme for Robot Manipulators-A Review," In Proceeding of the 1987 IEEE Conference on Robotics and Automation, San Fransisco, CA, (1986).
D. Koditschek, "Quadratic Lyapunov Functions for Mecanical Systems," Technical Report No. 8703, Yale University, New Haven, CT, (1983).
J. J. Craig, "Adaptive Control of Meduanical Manipulator," Addison-wesley, (1988).
S. K. Tso, Y. Xu and H. Y. Shum, "Variable structure model reference adaptive control of robot manipulators," Proceeding of the 1991 IEEE International Conference on Robotics and Automation, Sacramento, California, April (1991).
Louis-A. Dessaint, Maarrouf Saad, Bernard Hebert and Kamal Al-Haddad, "An adaptive controller for a direct-drive SCARA robot," IEEE Trans, on Industiral Electronics, Vol. 39, no. 2, pp. 105-111, April (1992).
H. Berghuis, R.Orbega, and H.Nijmeijer, "A Robust Adaptive Robot controller," IEEE Trans., Robotics and Automation, Vol. 9, No. 6, pp. 825-830, (1993).
A. Koivo and T. H. Guo, "Adaptive Linear Controller for Robot Manipulators." IEEE Transactions and Automatic Control, Vol. AC-28, pp. 162-171, (1983).
R. Ortega and M.W. Spong, "Adaptive Motion Control of Rigid Robots: A Tutorial," Automatica, Vol. 25, pp. 877-888, (1989).
P. Tomei, "Adaptive PD Controller for Robot Manipulators," IEEE Trans. Robotics and Automation, Vol.7, No.4, Aug., (1991).
J. J. Craig, Adaptive Control of Mechanical Manipulators, Addison-Wesley, (1988).
J. E. Slotine ad W. Li, "Adaptive Manipulator control : A case study," IEEE Trans. Automat. Contr., Vol. AC-33, no. 11, pp. 995-1003, Nov., (1988).
J. E. Slotine ad W. Li, "Adaptive Nonlinear Control, Prentice-Hall, (1991).
J. Craig, "Introduction to Robotics," Addison-Wesley, (1989).
김유경, 전기준, "한축 로봇 매니퓰레이터의 퍼지로 보상한 토크 계산 제어," 제 14회 자동제어학술회의 논문집., (1999).
M. A. Liama, R. Kelly and V. Santivanez, "Stable computed torque control of robot manipulators via fuzzy self-tuning," IEEE Trans. on System and Cybernectics, Vol. 30, no. 1, Feb., (2000).
J. A. Tenreiro Machado, J. L. Martins de Carvalho and Alexandra M. S. F. Galhano, "Analysis of robot dynamics and compensation using classical and computed torque techniques," IEEE Trans. on Education, Vol. 36, no. 4, Nov., (1993).
S. Nicosia and P. Tomee, "Model Reference Adaptive Control Algorithm for Imdustrial Robots," Automatica, Vol. 20, No. 5, pp. 635-644, (1984).
N. Sadegh and R. Horowitz, "An Exponentially Stable Adaptive Control Law for Robot Manipulators," IEEE Trans. Robotics and Automation, Vol. 9, No. 4, Aug., (1990).
F. T, Cheng, J. S. Chen, " Study and resolution of singularities for a 7 DOF redundant manipulator" IEEE Transactions on Industrial Electronics, 45 (3), pp. 469-480, (1988).
Zbigniew Michanlewicz, Genetic Algorithm + Data StructuresEvolution Programs, Springer - Verlag, (1992).
Davie E. Goldberg, Genetic Algorithm in search, Optimization, and Machine, Learning, Addison-Wesley, (1989).
K. C. Suh and J. M. Hollerbach, "Local versus global torque optimization of redundant manipulators", in Proc, IEEE Int. Conf. Robot. Autom., pp.619-624., (1987).
정양근, 심현석, 이우송, 한성현, "영상 피드백에 의한 4축 스카라 로봇의 실시간 궤적추적제어에 관한 연구", 한국산업융합학회 논문집, 제17권 3호, pp. 136-144, (2014).
이세한, "운동용 힘 발생기를 위한 리니어 모터의 전류제어", 한국산업융합학회 논문집, 제18권 1호, pp. 1-9, (2015).
양준석, 구영목, 조상영, 원종범, 원종대, 한성현, "내열환경 단조공정에서 핸들링작업을 위한 유연 아암 그리퍼 설계에 관한 연구", 한국산업융합학회 논문집, 제18권 4호, pp. 216-223, (2015).
조상영, 김민성, 양준석, 원종범, 강정석, 한성현, "수직다관절형 아암의 운동학적 모델링 및 관절공간 모션제어에 관한 연구", 한국산업융합학회 논문집, 제19권 1호, pp. 18-30, (2016).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.